Signed-off-by: Chen-Yu Tsai <w...@csie.org> --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + drivers/clk/sunxi/clk-mod0.c | 55 +++++++++++++++++++++++ 2 files changed, 56 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 425b109..fb3b7aa 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -50,6 +50,7 @@ Required properties: "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c index 4a56385..9850887 100644 --- a/drivers/clk/sunxi/clk-mod0.c +++ b/drivers/clk/sunxi/clk-mod0.c @@ -94,6 +94,61 @@ static void __init sun5i_a13_mbus_setup(struct device_node *node) } CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup); +/** + * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks + * MBUS rate is calculated as follows + * rate = parent_rate / (m + 1); + */ + +static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div > 8) + div = 8; + + *freq = parent_rate / div; + + /* we were called to round the frequency, we can now return */ + if (m == NULL) + return; + + *m = div - 1; +} + +static struct clk_factors_config sun8i_a23_mbus_config = { + .mshift = 0, + .mwidth = 3, +}; + +static const struct factors_data sun8i_a23_mbus_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun8i_a23_mbus_config, + .getter = sun8i_a23_get_mbus_factors, +}; + +static DEFINE_SPINLOCK(sun8i_a23_mbus_lock); + +static void __init sun8i_a23_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data, + &sun8i_a23_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup); + struct mmc_phase_data { u8 offset; }; -- 2.1.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.