Hi everyone, This series adds support for Allwinner's A23 SoC. All the patches are either direct cherry-picks or changes manually merged from u-boot-sunxi.
Patch 1 adds uart0 pinmux values for A23. Patch 2 adds support for using uart0 on port F, either using a breakout board or soldering wires to exposed pads. At least one version of A23 tablets requires this, as no other uarts are exposed. Patch 3 adds support for sun8i in the mmc driver. This is the same as sun6i. Patch 4 adds machine support for sun8i. Patch 5 adds support for gpio banks L and beyond, which is used by r_uart, p2wi (on sun6i) and rsb (on sun8i). Patch 6 makes the prcm apb0 clock enabling function to take an argument for which modules should be enabled. Patch 7 adds support for using r_uart as a console (with CONS_INDEX=5). Patch 8 adds a defconfig for the Ippo Q8H A23 tablet board. Changes since v1: - Dropped "ARM: sunxi: Fix build break when CONFIG_MMC is not defined" (already merged) - Add clarifying comment about SUNXI_GPIO_BANKS macro - Correct R_PIO L pin bank starting offset - Check for R_PIO pins by matching against L pin bank start pin number Cheers ChenYu Chen-Yu Tsai (7): ARM: sunxi: Add sun8i (A23) UART0 pin mux support ARM: sunxi: Add support for uart0 on port F (mmc0) mmc: sunxi: Add support for sun8i (A23) ARM: sunxi: Add basic A23 support ARM: sunxi: Allow specifying module in prcm apb0 init function ARM: sunxi: Add support for using R_UART as console ARM: sunxi: Add Ippo-q8h-v5 A23 tablet board defconfig Hans de Goede (1): ARM: sunxi: Add support for R_PIO gpio banks arch/arm/Kconfig | 3 +++ arch/arm/cpu/armv7/sunxi/Makefile | 2 ++ arch/arm/cpu/armv7/sunxi/board.c | 18 +++++++++++++-- arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 6 +++++ arch/arm/cpu/armv7/sunxi/cpu_info.c | 2 ++ arch/arm/cpu/armv7/sunxi/prcm.c | 12 +++++----- arch/arm/include/asm/arch-sunxi/clock.h | 2 +- arch/arm/include/asm/arch-sunxi/cpu.h | 1 + arch/arm/include/asm/arch-sunxi/gpio.h | 40 +++++++++++++++++++++++++++++++-- arch/arm/include/asm/arch-sunxi/mmc.h | 2 +- arch/arm/include/asm/arch-sunxi/prcm.h | 2 +- board/sunxi/Kconfig | 3 ++- board/sunxi/MAINTAINERS | 5 +++++ configs/Ippo_q8h_defconfig | 4 ++++ drivers/mmc/sunxi_mmc.c | 2 +- include/configs/sun8i.h | 23 +++++++++++++++++++ include/configs/sunxi-common.h | 3 +++ 17 files changed, 116 insertions(+), 14 deletions(-) create mode 100644 configs/Ippo_q8h_defconfig create mode 100644 include/configs/sun8i.h -- 2.1.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.