To avoid introduction of a new compatible for each small SoC/DMA controller variation, move the definition of the channel count to the devicetree.
The number of vchans is no longer explicit, but limited by the highest port/DMA request number. The result is a slight overallocation for SoCs with a sparse port mapping. Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de> --- Changes in v3: None Changes in v2: - Set default number of dma-request if not provided in config or devicetree drivers/dma/sun6i-dma.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index b08b89fa4679..34d70af442ff 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -42,6 +42,9 @@ #define DMA_STAT 0x30 +/* Offset between DMA_IRQ_EN and DMA_IRQ_STAT limits number of channels */ +#define DMA_MAX_CHANNELS (DMA_IRQ_CHAN_NR * 0x10 / 4) + /* * sun8i specific registers */ @@ -65,7 +68,8 @@ #define DMA_CHAN_LLI_ADDR 0x08 #define DMA_CHAN_CUR_CFG 0x0c -#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & 0x1f) +#define DMA_CHAN_MAX_DRQ 0x1f +#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & DMA_CHAN_MAX_DRQ) #define DMA_CHAN_CFG_SRC_IO_MODE BIT(5) #define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5) #define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7) @@ -1152,6 +1156,7 @@ MODULE_DEVICE_TABLE(of, sun6i_dma_match); static int sun6i_dma_probe(struct platform_device *pdev) { const struct of_device_id *device; + struct device_node *np = pdev->dev.of_node; struct sun6i_dma_dev *sdc; struct resource *res; int ret, i; @@ -1227,6 +1232,36 @@ static int sun6i_dma_probe(struct platform_device *pdev) sdc->num_vchans = sdc->cfg->nr_max_vchans; sdc->max_request = sdc->cfg->nr_max_requests; + ret = of_property_read_u32(np, "dma-channels", &sdc->num_pchans); + if (ret && !sdc->num_pchans) { + dev_err(&pdev->dev, "Can't get dma-channels.\n"); + return ret; + } + + if (sdc->num_pchans > DMA_MAX_CHANNELS) { + dev_err(&pdev->dev, "Number of dma-channels out of range.\n"); + return -EINVAL; + } + + ret = of_property_read_u32(np, "dma-requests", &sdc->max_request); + if (ret && !sdc->max_request) { + dev_info(&pdev->dev, "Missing dma-requests, using %u.\n", + DMA_CHAN_MAX_DRQ); + sdc->max_request = DMA_CHAN_MAX_DRQ; + } + + if (sdc->max_request > DMA_CHAN_MAX_DRQ) { + dev_err(&pdev->dev, "Value of dma-requests out of range.\n"); + return -EINVAL; + } + + /* + * If the number of vchans is not specified, derive it from the + * highest port number, at most one channel per port and direction. + */ + if (!sdc->num_vchans) + sdc->num_vchans = 2 * (sdc->max_request + 1); + sdc->pchans = devm_kcalloc(&pdev->dev, sdc->num_pchans, sizeof(struct sun6i_pchan), GFP_KERNEL); if (!sdc->pchans) -- 2.14.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.