unsubscribe linux-usb angel...@gmail.com
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi
don't know if you have already fixed this, anyway,
i finally solved with this patch,
iff --git a/drivers/usb/musb/da8xx.c
b/../linux-3.17/drivers/usb/musb/da8xx.c
index 4e13fe2..058775e 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/../linux-3.17/drivers/usb/musb/da8xx.c
@@ -184,11 +184,6 @@ s
I have some more, hope useful info on this issue,
i am working now in MUSB_OTG mode, as default
See what is happening on the table below.
Device (arm, am1808 cpu) boots
state
eventchanges to devctl
boot
interruptb_idle 0x81 (b1001, B device, session
Hi all,
was switched to other tasks last week and couldn't contribute.
Seems MUSB is also broken on OMAP3 boards, booting in OTG mode I'm not
able to make it work when a pendrive is connected to the port. Forcing
HOST mode I get following messages:
[ 13.244567] usb 2-1: new high-speed USB
Had some progresses:
on kernel 3.17, musb controller driver is set to start as OTG mode as
default. So as first thing, since my board has ID pin shorted to ground,
i changed the default mode to MUSB_HOST., as it was on kernel 3.5.1
So with same settings of 3.5.1 now key is detected correctly
Hi,
i am moving from kernel 3.5.1 to 3.17, on a custom AM1808(arm) based
board.I could have host usb working inserting a usb key, but after
removing it, a second insertion of the stick is not detected anymore.
I had to enable the broken Kconfig option into /drivers/usb/musb/Kconfig:
config USB