From: Florian Fainelli
Date: Tue, 15 May 2018 16:56:17 -0700
> This patch series updates of_mdiobus_register() such that when the device_node
> argument is NULL, it calls mdiobus_register() directly. This is consistent
> with
> the behavior of of_mdiobus_register() when
From: Bjørn Mork
Date: Wed, 2 May 2018 22:22:54 +0200
> The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that
> the { vendorid, productid, interfacenumber } set uniquely
> identifies one specific function. This has proven to fail
> for some configurable devices. One
From: SZ Lin (林上智)
Date: Thu, 26 Apr 2018 14:30:13 +0800
> This patch adds support for PID 0x90b2 of ublox R410M.
>
> qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer
> [/dev/cdc-wdm0] Device manufacturer retrieved:
> Manufacturer: 'u-blox'
>
> qmicli -d /dev/cdc-wdm0
From: Phil Elwell
Date: Thu, 19 Apr 2018 17:59:37 +0100
> The Microchip LAN78XX family of devices are Ethernet controllers with
> a USB interface. Despite being discoverable devices it can be useful to
> be able to configure them from Device Tree, particularly in low-cost
>
From: Pawel Dembicki
Date: Wed, 18 Apr 2018 16:03:24 +0200
> This modem is embedded on dlink dwr-960 router.
> The oem configuration states:
...
> Tested on openwrt distribution
>
> Signed-off-by: Pawel Dembicki
Applied and queued up for
From: Phil Elwell
Date: Tue, 10 Apr 2018 13:18:25 +0100
> Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY
> initialisation into lan78xx_probe, but lan78xx_open subsequently calls
> lan78xx_reset. As well as forcing a second round of link negotiation,
> this
From: Oliver Neukum
Date: Wed, 11 Apr 2018 13:25:38 +0200
> Am Mittwoch, den 11.04.2018, 13:15 +0200 schrieb Bassem Boubaker:
>> The Cinterion AHS8 is a 3G device with one embedded WWAN interface
>> using cdc_ether as a driver.
>>
>> The modem is controlled via AT
From: Phil Elwell
Date: Wed, 11 Apr 2018 12:02:47 +0100
> lan78xx_defer_event generates an error message whenever the work item
> is already scheduled. lan78xx_open defers three events -
> EVENT_STAT_UPDATE, EVENT_DEV_OPEN and EVENT_LINK_RESET. Being aware
> of the
From: Phil Elwell
Date: Wed, 11 Apr 2018 10:59:17 +0100
> lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP
> content, but the value gets overwritten before it is returned and the
> read goes ahead anyway. Make the read conditional as it should be
> and
From: Alexander Graf
Date: Wed, 4 Apr 2018 00:19:35 +0200
> When using wicked with a lan78xx device attached to the system, we
> end up with ethtool commands issued on the device before an ifup
> got issued. That lead to the following crash:
>
...
> The culprit is quite simple:
From: Marc Zyngier
Date: Mon, 02 Apr 2018 10:45:40 +0100
> What has changed between this patch and the previous one? Having a bit
> of a change-log would certainly help. Also, I would have appreciated a
> reply to the questions I had on v2 before you posted a third version.
From: Marc Zyngier
Date: Sat, 31 Mar 2018 12:16:05 +
> I'd suggest that this patch is reverted until we understand what is
> actually going on here.
Yep, makes sense, reverted.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a
From: Torsten Hilbrich
Date: Mon, 26 Mar 2018 07:19:57 +0200
> This is needed to support the modem found in HP EliteBook 820 G3.
>
> Signed-off-by: Torsten Hilbrich
Applied, thank you.
--
To unsubscribe from this list: send the line
From: Pawel Dembicki
Date: Sat, 24 Mar 2018 22:08:14 +0100
> BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
> Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
> The USB id is added to qmi_wwan.c to allow QMI communication with
> the BM806U.
>
>
From: Joe Perches
Date: Fri, 23 Mar 2018 15:54:39 -0700
> Prefer the direct use of octal for permissions.
>
> Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
> and some typing.
>
> Miscellanea:
>
> o Whitespace neatening around these conversions.
>
>
From: Torsten Hilbrich
Date: Fri, 23 Mar 2018 14:26:18 +0100
> This is needed to support the modem found in HP EliteBook 820 G3.
>
> Signed-off-by: Torsten Hilbrich
This patch was corrupted by your email client, it transformed TAB
From: Joe Perches
Date: Mon, 12 Mar 2018 08:07:12 -0700
> skb_copy_expand without __GFP_NOWARN already does a dump_stack
> on OOM so these messages are redundant.
>
> Signed-off-by: Joe Perches
Ok, applied to net-next, thanks.
--
To unsubscribe from this
From: Johan Hovold
Date: Wed, 7 Mar 2018 10:46:57 +0100
> Drop bogus call to usb_driver_release_interface() from an error path in
> the usbnet bind() callback, which is called during interface probe. At
> this point the interface is not bound and usb_driver_release_interface()
From: Johan Hovold
Date: Wed, 7 Mar 2018 10:46:58 +0100
> Drop bogus call to usb_driver_release_interface() from an error path in
> the usbnet bind() callback, which is called during interface probe. At
> this point the interface is not bound and usb_driver_release_interface()
From: Eric Dumazet
Date: Mon, 05 Mar 2018 11:41:13 -0800
> From: Eric Dumazet
>
> Marek reported a LOCKDEP issue occurring on 32bit host,
> that we tracked down to the fact that usbnet could either
> run from soft or hard irqs.
>
> This patch adds
From: Alexander Kurz
Date: Wed, 28 Feb 2018 21:27:39 +
> -static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
> +static int ax88179_link_bind_or_reset(struct usbnet *dev, int do_reset)
"do_reset" is a boolean, therefore please use type 'bool' and
From: Colin King
Date: Fri, 2 Mar 2018 13:42:39 +
> From: Colin Ian King
>
> Use the ARRAY_SIZE macro on a couple of arrays to determine
> size of the arrays. Also fix up alignment to clean up a checkpatch
> warning. Improvement
From: Bassem Boubaker
Date: Tue, 27 Feb 2018 14:04:44 +0100
> The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces.
>
> The modem is controlled via AT commands through the exposed TTYs.
>
> AT^SWWAN write command can be used to activate or
From: Hayes Wang
Date: Fri, 2 Feb 2018 16:43:34 +0800
> The two patched are used to fix rx issues.
Series applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at
From: James Hogan
Date: Wed, 31 Jan 2018 22:24:46 +
> Now that USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC are moved
> outside of the USB_SUPPORT conditional, simply select them from
> SPARC_LEON rather than by the symbol's defaults in drivers/usb/Kconfig,
>
From: Hayes Wang
Date: Thu, 18 Jan 2018 03:04:08 +
> [...]
>> > r8153 on Dell TB15/16 dock corrupts rx packets.
>> >
>> > This change is suggested by Realtek. They guess that the XHCI
>> > controller doesn't have enough buffer, and their guesswork is correct,
>> > once
From: Kai-Heng Feng
Date: Tue, 16 Jan 2018 16:46:27 +0800
> r8153 on Dell TB15/16 dock corrupts rx packets.
>
> This change is suggested by Realtek. They guess that the XHCI controller
> doesn't have enough buffer, and their guesswork is correct, once the RX
>
From: SZ Lin (林上智)
Date: Fri, 29 Dec 2017 17:02:17 +0800
> This patch adds support for PID 0x9625 of YUGA CLM920-NC5.
>
> YUGA CLM920-NC5 needs to enable QMI_WWAN_QUIRK_DTR before QMI operation.
>
> qmicli -d /dev/cdc-wdm0 -p --dms-get-revision
> [/dev/cdc-wdm0] Device
From: Bjørn Mork
Date: Thu, 14 Dec 2017 19:55:50 +0100
> It has been reported that the dummy byte we add to avoid
> ZLPs can be forwarded by the modem to the PGW/GGSN, and that
> some operators will drop the connection if this happens.
>
> In theory, QMI devices are based on CDC
From: ssjoh...@mac.com
Date: Mon, 11 Dec 2017 21:51:14 +0100
> From: Sebastian Sjoholm
>
> Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem.
> The USB id is added to qmi_wwan.c to allow QMI communication
> with the EM7565.
>
> Signed-off-by: Sebastian Sjoholm
From: Bjørn Mork <bj...@mork.no>
Date: Thu, 07 Dec 2017 20:01:16 +0100
> David Miller <da...@davemloft.net> writes:
>
>> From: Bjørn Mork <bj...@mork.no>
>> Date: Wed, 6 Dec 2017 20:21:24 +0100
>>
>>> The qmi_wwan minidriver support a 'raw
From: Bjørn Mork
Date: Wed, 6 Dec 2017 20:21:24 +0100
> The qmi_wwan minidriver support a 'raw-ip' mode where frames are
> received without any ethernet header. This causes alignment issues
> because the skbs allocated by usbnet are "IP aligned".
>
> Fix by allowing minidrivers
From: Sebastian Sjoholm
Date: Mon, 20 Nov 2017 19:05:17 +0100
> Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both
> CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development
> board (EVB). The USB id is added to qmi_wwan.c to allow QMI
>
From: "Gustavo A. R. Silva"
Date: Fri, 17 Nov 2017 14:02:09 -0600
> _dev_ is being dereferenced before it is null checked, hence there
> is a potential null pointer dereference.
>
> Fix this by moving the pointer dereference after _dev_ has been null
> checked.
>
>
From: Greg Kroah-Hartman
Date: Fri, 17 Nov 2017 15:19:39 +0100
> There is no need to #define the license of the driver, just put it in
> the MODULE_LICENSE() line directly as a text string.
>
> This allows tools that check that the module license matches the source
>
From: Bjørn Mork
Date: Wed, 15 Nov 2017 09:35:02 +0100
> The GetNtbFormat and SetNtbFormat requests operate on 16 bit little
> endian values. We get away with ignoring this most of the time, because
> we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x. This
> fails for
From: Kristian Evensen
Date: Tue, 7 Nov 2017 13:47:56 +0100
> When we receive a packet on a QMI device in raw IP mode, we should call
> skb_reset_mac_header() to ensure that skb->mac_header contains a valid
> offset in the packet. While it shouldn't really matter,
From: Bjørn Mork
Date: Mon, 6 Nov 2017 15:37:22 +0100
> Setting dev->hard_mtu to 0 will cause a divide error in
> usbnet_probe. Protect against devices with bogus CDC Ethernet
> functional descriptors by ignoring a zero wMaxSegmentSize.
>
> Signed-off-by: Bjørn Mork
From: Bjørn Mork
Date: Mon, 6 Nov 2017 15:32:18 +0100
> A CDC Ethernet functional descriptor with wMaxSegmentSize = 0 will
> cause a divide error in usbnet_probe:
>
> divide error: [#1] PREEMPT SMP KASAN
...
> Fix by simply ignoring the bogus descriptor, as it is optional
From: Andrey Konovalov
Date: Thu, 2 Nov 2017 21:26:59 +0100
> When asix_suspend() is called dev->driver_priv might not have been
> assigned a value, so we need to check that it's not NULL.
>
> Found by syzkaller.
...
> Signed-off-by: Andrey Konovalov
From: Colin King
Date: Tue, 31 Oct 2017 12:01:47 +
> From: Colin Ian King
>
> The pointer dev is being assigned but is never used, hence it is
> redundant and can be removed. Cleans up clang warning:
>
> drivers/net/usb/hso.c:2280:2:
From: Aleksander Morgado
Date: Mon, 23 Oct 2017 17:16:41 +0200
> The Huawei ME906 (12d1:15c1) comes with a standard ECM interface that
> requires management via AT commands sent over one of the control TTYs
> (e.g. connected with AT^NDISDUP).
>
> Signed-off-by:
From: Ran Wang
Date: Mon, 23 Oct 2017 18:10:23 +0800
> This product is named 'TP-LINK USB 3.0 Gigabit Ethernet Network
> Adapter (Model No.is UE300)'. It uses chip RTL8153 and works with
> driver drivers/net/usb/r8152.c
>
> Signed-off-by: Ran Wang
From: Aleksander Morgado
Date: Mon, 9 Oct 2017 14:05:12 +0200
> The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback.
> This module allows switching to different USB profiles with the
> 'AT+UUSBCONF' command, and provides a ECM network interface when the
From: Bjørn Mork
Date: Tue, 03 Oct 2017 16:01:15 +0200
> We can pretty much ignore the USB-IF and any specs, since that is what
> the vendors appear to do. They provide device specific drivers for
> Windows, so all they care about is that their device "works" with their
> driver.
From: Aleksander Morgado
Date: Wed, 27 Sep 2017 23:31:03 +0200
> I'm not sure if binding this logic to a specific vid:pid (1410:9030)
> would be more appropriate here, or if it's ok to just bind
> class/subclass/protocol (as in the activesync case). Let me know
> what
From: Grant Grundler
Date: Thu, 28 Sep 2017 11:35:00 -0700
> This linksys dongle by default comes up in cdc_ether mode.
> This patch allows r8152 to claim the device:
>Bus 002 Device 002: ID 13b1:0041 Linksys
>
> Signed-off-by: Grant Grundler
From: Allen Pais
Date: Thu, 21 Sep 2017 18:24:15 +0530
> Use setup_timer function instead of initializing timer with the
> function and data fields.
>
> Signed-off-by: Allen Pais
Applied.
--
To unsubscribe from this list: send the line
From: Aleksander Morgado
Date: Fri, 25 Aug 2017 15:39:16 +0200
> The u-blox TOBY-L4 is a LTE Advanced (Cat 6) module with HSPA+ and 2G
> fallback.
>
> Unlike the TOBY-L2, this module has one single USB layout and exposes
> several TTYs for control and a NCM interface
From: Bjørn Mork
Date: Tue, 8 Aug 2017 18:02:11 +0200
> qmi_wwan_disconnect is called twice when disconnecting devices with
> separate control and data interfaces. The first invocation will set
> the interface data to NULL for both interfaces to flag that the
> disconnect has
From: Dean Jenkins
Date: Mon, 7 Aug 2017 09:50:13 +0100
> Please consider taking these patches to improve the robustness of the ASIX USB
> to Ethernet driver.
I applied these to 'net' since they are bug fixes.
Please target bug fixes to 'net' instead of 'net-next' in
From: Hector Martin
Date: Wed, 2 Aug 2017 00:45:44 +0900
> Signed-off-by: Hector Martin
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at
From: Arvind Yadav
Date: Tue, 18 Jul 2017 15:13:44 +0530
> attribute_group are not supposed to change at runtime. All functions
> working with attribute_group provided by work with const
> attribute_group. So mark the non-const structs as const.
Series applied,
From: Petr Kulhavy
Date: Thu, 13 Jul 2017 19:40:57 +0200
> This change enables the use of SW timestamping on Raspberry PI.
>
> smsc95xx uses the usbnet transmit function usbnet_start_xmit(), which
> implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE
>
From: Enrico Mioso
Date: Tue, 11 Jul 2017 17:21:52 +0200
> Some firmwares in Huawei E3372H devices have been observed to switch back
> to NTB 32-bit format after altsetting switch.
> This patch implements a driver flag to check for the device settings and
> set NTB format to
From: Arvind Yadav
Date: Tue, 11 Jul 2017 12:52:41 +0530
> attribute_groups are not supposed to change at runtime. So mark the
> non-const structs as const.
Please resubmit this when net-next is open again:
http://vger.kernel.org/~davem/net-next.html
Thank
From: Tore Anderson
Date: Sat, 1 Jul 2017 15:20:02 +0200
> The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei
> ME906s-158 device. It, like the ME906s-158, requires the "NDP to end"
> quirk for correct operation.
>
> Signed-off-by: Tore Anderson
From: Jim Baxter
Date: Wed, 28 Jun 2017 21:35:29 +0100
> The CDC-NCM driver can require large amounts of memory to create
> skb's and this can be a problem when the memory becomes fragmented.
>
> This especially affects embedded systems that have constrained
> resources
From: Jim Baxter
Date: Wed, 28 Jun 2017 21:35:29 +0100
> The CDC-NCM driver can require large amounts of memory to create
> skb's and this can be a problem when the memory becomes fragmented.
>
> This especially affects embedded systems that have constrained
> resources
From: "Andrew F. Davis"
Date: Mon, 26 Jun 2017 12:41:20 -0500
> The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the
> Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet
> chip supported by this driver, add the USB ID for the same.
>
> This patch is
From: Hayes Wang
Date: Wed, 21 Jun 2017 11:25:18 +0800
> Replace VLAN_HLEN and CRC_SIZE with ETH_FCS_LEN.
>
> Signed-off-by: Hayes Wang
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to
From: Hayes Wang <hayesw...@realtek.com>
Date: Fri, 16 Jun 2017 03:29:01 +0000
> David Miller [mailto:da...@davemloft.net]
>> Sent: Wednesday, June 14, 2017 1:02 AM
>> > v2:
>> > For #1, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb().
>> >
&g
From: Hayes Wang
Date: Thu, 15 Jun 2017 14:44:01 +0800
> These patches are used to support new chips.
Series applied, thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo
From: Bjørn Mork
Date: Tue, 13 Jun 2017 19:10:18 +0200
> A new Sierra Wireless EM7305 device ID used in a Toshiba laptop,
> and two Longcheer device IDs entries used by Telewell TW-3G HSPA+
> branded modems.
>
> Reported-by: Petr Kloc
> Reported-by: Teemu
From: Hayes Wang
Date: Tue, 13 Jun 2017 15:14:38 +0800
> v2:
> For #1, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb().
>
> v1:
> Improve the flow about runtime suspend/resume and make the code
> easy to read.
Series applied.
--
To unsubscribe from this list: send
From: David Miller <da...@davemloft.net>
Date: Mon, 12 Jun 2017 10:25:25 -0400 (EDT)
> From: Yuval Shaia <yuval.sh...@oracle.com>
> Date: Mon, 12 Jun 2017 17:15:08 +0300
>
>> Make return value void since function never return meaningfull value
>>
>&g
From: Yuval Shaia
Date: Mon, 12 Jun 2017 17:15:08 +0300
> Make return value void since function never return meaningfull value
>
> Signed-off-by: Yuval Shaia
> Acked-by: Sergei Shtylyov
> ---
> v0 ->v1:
>
From: Yuval Shaia
Date: Mon, 12 Jun 2017 10:42:33 +0300
> Make return value void since function never return meaningfull value
>
> Signed-off-by: Yuval Shaia
> Acked-by: Sergei Shtylyov
> ---
> Re-sending
From: Hayes Wang
Date: Fri, 9 Jun 2017 17:11:37 +0800
> Adjust some code to make it reasonable or satisfy the suggestion from
> the engineers.
Series applied, thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to
From: Yuval Shaia
Date: Sun, 4 Jun 2017 20:22:00 +0300
> Make return value void since functions never returns meaningfull value.
>
> Signed-off-by: Yuval Shaia
Applied to net-next.
--
To unsubscribe from this list: send the line "unsubscribe
From: Romain Perier
Date: Tue, 23 May 2017 10:53:36 +0200
> Hello,
>
>
> Le 23/05/2017 à 09:27, Leon Romanovsky a écrit :
>> On Mon, May 22, 2017 at 06:48:58PM +0200, Romain Perier wrote:
>>> The PCI pool API is deprecated. This commit replaces the PCI pool old
>>>
From: Oliver Neukum <oneu...@suse.com>
Date: Tue, 23 May 2017 10:42:48 +0200
> Am Montag, den 22.05.2017, 11:54 -0400 schrieb David Miller:
>>
>> Unfortunately without a real notifier of some sort (there isn't one, and
>> it isn't actually easy to come up with a
From: "Baxter, Jim"
Date: Mon, 22 May 2017 16:45:42 +0100
> From: David S. Miller (da...@davemloft.net)
> Sent: Wed, 17 May 2017 14:18:19 -0400
>
>>
>> When there isn't memory pressure this will hurt performance of
>> course.
>>
>> It is a quite common paradigm to back
From: Matthias Kaehlcke
Date: Thu, 18 May 2017 10:57:19 -0700
> The function is not used, removing it fixes the following warning when
> building with clang:
>
> drivers/net/usb/net1080.c:271:20: error: unused function
> 'nc_dump_ttl' [-Werror,-Wunused-function]
>
> Also
From: Matthias Kaehlcke
Date: Thu, 18 May 2017 10:45:33 -0700
> The function is not used, removing it fixes the following warning when
> building with clang:
>
> drivers/net/usb/r8152.c:825:5: error: unused function 'usb_ocp_read'
> [-Werror,-Wunused-function]
>
>
From: Matthias Kaehlcke
Date: Wed, 17 May 2017 15:17:08 -0700
> The function is not used, but it looks useful for debugging. Adding the
> attribute fixes the following clang warning:
>
> drivers/net/usb/net1080.c:271:20: error: unused function
> 'nc_dump_ttl'
From: Bjørn Mork
Date: Wed, 17 May 2017 16:31:41 +0200
> In their infinite wisdom, and never ending quest for end user frustration,
> Lenovo has decided to use a new USB device ID for the wwan modules in
> their 2017 laptops. The actual hardware is still the Sierra Wireless
>
From: Bjørn Mork
Date: Tue, 16 May 2017 20:24:10 +0200
> Jim Baxter writes:
>
>> The CDC-NCM driver can require large amounts of memory to create
>> skb's and this can be a problem when the memory becomes fragmented.
>>
>> This especially affects embedded
From: Johan Hovold
Date: Fri, 12 May 2017 12:13:26 +0200
> Add the missing endianness conversions to a debug statement printing
> the USB device-descriptor idVendor and idProduct fields during probe.
>
> Signed-off-by: Johan Hovold
Applied.
--
To
From: Jim Baxter
Date: Mon, 8 May 2017 13:49:57 +0100
> The zero padding that is added to NTB's does
> not zero the memory correctly.
> This is because the skb_put modifies the value
> of skb_out->len which results in the memset
> command not setting any memory to zero as
From: Andreas Kemnade
Date: Wed, 26 Apr 2017 19:26:40 +0200
> If the netdev is accessed before the urbs are initialized,
> there will be NULL pointer dereferences. That is avoided by
> registering it when it is fully initialized.
>
> This case occurs e.g. if dhcpcd is
From: Andreas Kemnade
Date: Mon, 24 Apr 2017 21:18:39 +0200
> keep tty driver until usb driver is unregistered
> rmmod hso
> produces traces like this without that:
...
> Signed-off-by: Andreas Kemnade
Applied, thank you.
--
To unsubscribe from this
From: Roman Spychała
Date: Thu, 20 Apr 2017 12:04:10 +0200
> From: Roman Spychała
>
> This patch adds support for the PL-27A1 by adding the appropriate
> USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
> and Unitek Y-3501 cables.
>
>
l.net>
> Cc: Microchip Linux Driver Support <unglinuxdri...@microchip.com>
> CC: David Miller <da...@davemloft.net>
> Signed-off-by: Martin Wetterwald <mar...@wetterwald.eu>
> Reviewed-by: Andrew Lunn <and...@lunn.ch>
> Acked-by: Steve Glendinning <steve
From: Daniele Palmas
Date: Mon, 10 Apr 2017 17:34:23 +0200
> Telit LE920A4 uses the same pid 0x1201 of LE920, but modem
> implementation is different, since it requires DTR to be set for
> answering to qmi messages.
>
> This patch replaces QMI_FIXED_INTF with
l.net>
> Cc: Microchip Linux Driver Support <unglinuxdri...@microchip.com>
> CC: David Miller <da...@davemloft.net>
> Signed-off-by: Martin Wetterwald <mar...@wetterwald.eu>
> ---
> Changes in v3:
> * Restore previous name for TX_CMD_B_CSUM_ENABLE
Please fix th
From: Andrew Lunn
Date: Mon, 10 Apr 2017 15:52:51 +0200
> Hi Martin
>
>> @@ -2032,7 +2032,7 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet
>> *dev,
>> skb_push(skb, 4);
>> tx_cmd_b = (u32)(skb->len - 4);
>> if (csum)
>> -tx_cmd_b |=
From: Florian Fainelli
Date: Tue, 4 Apr 2017 18:16:57 -0700
> With GCC 6.3, we can get the following warning:
>
> drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not
> used [-Wunused-const-variable=]
> static const char driver_name [] = "usbnet";
>
From: Greg Ungerer
Date: Mon, 3 Apr 2017 15:50:03 +1000
> Add support for the net stats64 counters to the usbnet core. With that
> in place put the hooks into every usbnet driver to use it.
>
> This is a strait forward addition of 64bit counters for RX and TX packet
> and
From: Daniele Palmas
Date: Fri, 24 Mar 2017 14:22:44 +0100
> This patch adds support for qmap mux protocol available in recent
> Qualcomm based modems.
>
> The qmap mux protocol can be used for multiplexing data packets in
> order to have multiple ip streams through the same
From: Hayes Wang
Date: Thu, 23 Mar 2017 19:14:19 +0800
> The linking status may be changed when autosuspend. And, after
> autoresume, the driver may try to transmit packets when the device
> is carrier off, because the interrupt transfer doesn't update the
> linking
From: Russell King - ARM Linux
Date: Tue, 21 Mar 2017 16:35:55 +
> This series cleans up phylib's MMD accessors, so that we have a common
> way of accessing the Clause 45 register set.
>
> The current situation is far from ideal - we have phy_(read|write)_mmd()
>
From: Hayes Wang
Date: Mon, 20 Mar 2017 16:13:43 +0800
> The RMS and the rx early size should base on the same rx size. However,
> the RMS is set to 9K bytes now and the rx early depends on mtu. For using
> the rx buffer effectively, sync the two settings according to the
From: Bjørn Mork
Date: Fri, 17 Mar 2017 17:20:48 +0100
> This is a Dell branded Sierra Wireless EM7455. It is operating in
> MBIM mode by default, but can be configured to provide two QMI/RMNET
> functions.
>
> Signed-off-by: Bjørn Mork
> ---
> Note regarding
From: Hayes Wang
Date: Fri, 17 Mar 2017 11:20:13 +0800
> Check hw version first in probe(). Do nothing if the driver doesn't
> support the chip.
>
> Signed-off-by: Hayes Wang
Applied, thanks.
--
To unsubscribe from this list: send the line
From: Oliver Neukum
Date: Tue, 21 Mar 2017 12:33:03 +0100
> Am Donnerstag, den 16.03.2017, 23:18 +0100 schrieb Philippe Reynes:
>> The ethtool api {get|set}_settings is deprecated.
>> We add the new api {get|set}_link_ksettings to this driver.
>>
>> As I don't have the
From: Philippe Reynes
Date: Thu, 16 Mar 2017 23:18:46 +0100
> The ethtool api {get|set}_settings is deprecated. On usbnet, it
> was often implemented with usbnet_{get|set}_settings.
>
> In this serie, I add usbnet_{get|set}_link_ksettings
> in the first patch, then I update
From: Hayes Wang
Date: Tue, 14 Mar 2017 14:15:20 +0800
> The list rx_done would be initialized when the linking on occurs.
> Therefore, if a napi is scheduled without any linking on before,
> the following kernel panic would happen.
>
> BUG: unable to handle kernel
From: Hayes Wang
Date: Thu, 16 Mar 2017 14:32:22 +0800
> Replace >napi with napi and tp->netdev with netdev.
>
> Signed-off-by: Hayes Wang
Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to
From: Guenter Roeck
Date: Fri, 10 Mar 2017 17:45:21 -0800
> An insert/remove stress test generated the following log message sequence.
...
> Use netdev_dbg() instead of netdev_warn() for the repeating messages
> to reduce logging noise.
>
> Signed-off-by: Guenter Roeck
1 - 100 of 634 matches
Mail list logo