On Wed, Jan 10, 2018 at 01:42:32PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> Hi Johan,
>
> Johan Hovold 於 2018/1/9 下午 07:32 寫道:
> > On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
> >> + /*
> >> + * We'll make tx frame error when baud rate from 384~500kps. So we'll
> >> +
Hi Johan,
Johan Hovold 於 2018/1/9 下午 07:32 寫道:
On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
+ /*
+* We'll make tx frame error when baud rate from 384~500kps. So we'll
+* delay all tx data frame with 1bit.
+*/
+ port_priv->shadow_cl
On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
> The F81532/534 had 4 clocksource 1.846/18.46/14.77/24MHz and baud rates
> can be up to 1.5Mbits with 24MHz. But on some baud rate (384~500kps), the
> TX side will send the data frame too close to treat frame error on RX
> si
The F81532/534 had 4 clocksource 1.846/18.46/14.77/24MHz and baud rates
can be up to 1.5Mbits with 24MHz. But on some baud rate (384~500kps), the
TX side will send the data frame too close to treat frame error on RX
side. This patch will force all TX data frame with delay 1bit gap.
Signed-off-by:
