On Sat, Oct 27, 2012 at 07:37:50PM -0700, Matthew Hall wrote:
> Sarah,
>
> I finally had occasion to experiment with this further, as more USB 3.0
> devices have become available at decent prices.
>
> I discovered that, while the card reader would fail with strange errors, a 32
> GB USB 3.0 fla
On Thu, Oct 11, 2012 at 11:03:54AM -0700, Sarah Sharp wrote:
> You can buy an xHCI host controller with the NEC (Rensas) chipset it in.
> You may be able to read the data sheets for the various cards and see
> which chipset they're using. For example, doing a search for "nec usb
> 3.0 card" on new
Hi guys,
I have the same problem with this xHCI controller. However my setup is
a little bit different - I have a USB 2.0 hub attached to the root
port, then a mouse attached to the USB 2.0 hub port. The hub is a MTT
hub with 7 ports (other hubs have the same problem, so I don't think
it is the hu
Yo All!
In my search for an Etron replacement, I thought I had a win in a
VLI VL80x based USB 3.0 card. After double checking I find I can't
get that chip to work at all. Sorry for making a bad recommendation.
The card keep giving messages like this:
Oct 15 19:16:24 kong kernel: usb 11-3: devi
On Wed, Oct 10, 2012 at 02:15:33PM -0700, Matthew Hall wrote:
> On Mon, Oct 08, 2012 at 02:34:24PM -0700, Gary E. Miller wrote:
> > > The error you're getting seems to me to indicate a
> > > hardware issue, and I'm really not sure how to solve it.
> >
> > Could be, I find many people have problems
Yo Matthew!
On Wed, 10 Oct 2012 14:15:33 -0700
Matthew Hall wrote:
> I'm wondering, what are my other options? How can I go about
> acquiring a PCIe card that uses a known-good working USB 3.0 chip
> instead? Or what else can I do to sort this issue out?
I just got one of these with the VLI VL8
On Mon, Oct 08, 2012 at 02:34:24PM -0700, Gary E. Miller wrote:
> > The error you're getting seems to me to indicate a
> > hardware issue, and I'm really not sure how to solve it.
>
> Could be, I find many people have problems with the chip.
>
> > > Cards with the Etron chip on them are $14 on ne
Yo Sarah!
On Mon, 8 Oct 2012 14:09:37 -0700
Sarah Sharp wrote:
> > Any new ideas?
>
> Have you tried to see if there's a firmware update for your Etron host
> controller?
www.etron.com is down. I have the latest mobo BIOS.
> The error you're getting seems to me to indicate a
> hardware issue
On Mon, Oct 08, 2012 at 12:25:48PM -0700, Gary E. Miller wrote:
> Yo All!
>
> I reported last month that when I plug a USB 1.1 or USB 2.0 device into
> my Etron USB 3.0 controller (xHCI) the device will not work. The
> failure message is always:
>
> [ 28.338599] usb 8-2.4: Not enough bandwidth
Yo All!
I reported last month that when I plug a USB 1.1 or USB 2.0 device into
my Etron USB 3.0 controller (xHCI) the device will not work. The
failure message is always:
[ 28.338599] usb 8-2.4: Not enough bandwidth for new device state.
[ 28.338613] usb 8-2.4: can't set config #1, error -2
10 matches
Mail list logo
