Am Mittwoch, den 20.06.2012, 17:34 +0200 schrieb Paul Menzel: > Am Mittwoch, den 20.06.2012, 11:11 -0400 schrieb Alan Stern: > > On Wed, 20 Jun 2012, Paul Menzel wrote: > > > > > [This message is more a less the same as sent to the Debian BTS > > > <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678215>.] > > > > after replacing a broken PS/2 mouse, which worked fine before that, with > > > an USB mouse > > > > > > $ lsusb # output from after the resume and replugged > > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 002 Device 004: ID 046d:c30f Logitech, Inc. Logicool > > > HID-Compliant Keyboard (106 key) > > > Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub > > > Bus 003 Device 003: ID 1241:1122 Belkin Typhoon Stream Optical > > > Mouse USB+PS/2 > > > > > > the mouse is not working after resuming from suspend to RAM. Replugging > > > the mouse works although that is quite inconvenient. > > > > ... > > > [ 1.660039] usb usb3: New USB device found, idVendor=1d6b, > > > idProduct=0001 > > > [ 1.660042] usb usb3: New USB device strings: Mfr=3, > > > Product=2, SerialNumber=1 > > > [ 3.108025] usb 3-1: new low-speed USB device number 2 using > > > ohci_hcd > > > [ 3.273061] usb 3-1: New USB device found, idVendor=1241, > > > idProduct=1122 > > > [ 3.273066] usb 3-1: New USB device strings: Mfr=0, Product=0, > > > SerialNumber=0 > > > [ 3.282359] input: HID 1241:1122 as > > > /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input2 > > > [ 3.282472] generic-usb 0003:1241:1122.0003: input,hidraw2: > > > USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-1/input0 > > > > > > Now the system is resuming after `sudo pm-suspend`. > > > > > > [12498.968042] usb 2-2: reset full-speed USB device number 3 > > > using ohci_hcd > > > [12512.152050] usb 2-1: USB disconnect, device number 2 > > > [12512.544068] usb 3-1: USB disconnect, device number 2 > > > > > > Could the above disconnect be the problem here? > > > > Undoubtedly it is related. > > > > > [12512.968046] usb 2-1: new low-speed USB device number 4 using > > > ohci_hcd > > > [12513.143894] usb 2-1: New USB device found, idVendor=046d, > > > idProduct=c30f > > > [12513.143901] usb 2-1: New USB device strings: Mfr=1, Product=2, > > > SerialNumber=0 > > > [12513.143905] usb 2-1: Product: Logitech USB Keyboard > > > [12513.143908] usb 2-1: Manufacturer: Logitech > > > [12513.157357] input: Logitech Logitech USB Keyboard as > > > /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input5 > > > [12513.157747] generic-usb 0003:046D:C30F.0004: input,hidraw0: > > > USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on > > > usb-0000:00:13.0-1/input0 > > > [12513.170016] input: Logitech Logitech USB Keyboard as > > > /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input6 > > > [12513.170314] generic-usb 0003:046D:C30F.0005: input,hidraw1: > > > USB HID v1.10 Device [Logitech Logitech USB Keyboard] on > > > usb-0000:00:13.0-1/input1 > > > > > > The keyboard is detected twice, but not the mouse. > > > > > > [12710.284049] usb 3-2: new low-speed USB device number 3 using > > > ohci_hcd > > > [12710.449087] usb 3-2: New USB device found, idVendor=1241, > > > idProduct=1122 > > > [12710.449097] usb 3-2: New USB device strings: Mfr=0, Product=0, > > > SerialNumber=0 > > > [12710.458732] input: HID 1241:1122 as > > > /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input7 > > > [12710.459106] generic-usb 0003:1241:1122.0006: input,hidraw2: > > > USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:13.1-2/input0 > > > > > > Replugging the mouse makes it work again. So the mouse is not recognized > > > after the resume. > > > > > > Switching the USB port does not make any difference either. > > > > > > I used that mouse on an ASUS EeePC 701 4G with outdated Debian > > > Sid/unstable and Linux 3.0.0 without problems. > > > > Evidently the mouse doesn't like the computer. Have you tried using a > > different mouse? > > No, I do not have another USB mouse here. The PS/2 one worked fine.
I found another USB mouse and this worked without problems. > > > Another problem indicating the board ASUS M2A-VM [1] behaves strangely, > > > is that the USB keyboard also randomly stops working. When I switched > > > the USB ports today I even got something in the Linux kernel ring > > > buffer. > > > > > > $ dmesg | grep EMI > > > [ 2454.450355] hub 4-0:1.0: port 2 disabled by hub (EMI?), > > > re-enabling... > > > > If that happens only when you move the cable between ports, you don't > > need to worry about it. It should never happen while the cable is > > plugged in normally. > > So I need to worry. :/ That message is only related the Logitech > keyboard I have here and it happened right during operation. No cables > were taken out. After plugging it out and in the keyboard worked again. > > > > Although it is weird again, that this happened on the other port too but > > > I only found this one message with `zgrep EMI /var/log/syslog*`. A post > > > on LinuxQuestions.org suggests this is due to bad shielding of the USB > > > cable. But I did not have these problems with the same keyboard on the > > > ASUS EeePC 701 4G. > > > > The bad shielding could be in the port, or where the port connects to > > the cable, or where the port connects to the motherboard. It doesn't > > have to be in the cable or the mouse. > > As written I got this EMI message only with the *keyboard* one time > today. > > > > Any hints on how to solve this issue are very much appreciated. > > > > The cheapest and easiest solution is to replace the mouse. > > True. I still would like to figure out what is going on. It is very > strange that the mouse issue only happens during resume, on every USB > port and is reproducible. > > I guess I need to recompile the Linux kernel with `CONFIG_USB_DEBUG` > set. Alright, I have a different motherboard now (ASRock A780FullHD) and the mouse works fine with it. Thanks for all your help, Paul
signature.asc
Description: This is a digitally signed message part
