Sarah Sharp writes:
>
> > But with RDF8 reader I just got write errors pretty quickly after starting
> > writing to the Transcend SDHC. With Sandisk card it works OK just like
> > with older kernels. (Also, my Nikon D60 has no trouble accessing any
> > of the cards.)
> >
My problems with Tra
On Sun, 16 Sep 2012, Sami Farin wrote:
> On Fri, Sep 14, 2012 at 12:01:36 -0700, Sarah Sharp wrote:
>
> some logs with the 0x4000 quirk enabled.. I tried to write to a file
> on VFAT fs—the Transcend SDHC again—I got only IO error and
> when mounted on USB2 port, filesystem had 0-byte file.
>
>
On Fri, Sep 14, 2012 at 12:01:36 -0700, Sarah Sharp wrote:
some logs with the 0x4000 quirk enabled.. I tried to write to a file
on VFAT fs—the Transcend SDHC again—I got only IO error and
when mounted on USB2 port, filesystem had 0-byte file.
sarah-quirk-dmesg.txt
(action starts at 180 seconds)
On Fri, 14 Sep 2012, Sami Farin wrote:
> I forgot to tell this quirk was not enabled in usb-next
> [4.299978] usb-storage 2-1.5.3:1.0: Quirks match for vid 8564 pid 4000:
> 4000
> (US_FL_BULK_IGNORE_TAG)
>
> Maybe it would have been happier with the RDF8..
Yes, that definitely is part of th
On Fri, Sep 14, 2012 at 12:01:36 -0700, Sarah Sharp wrote:
> On Fri, Sep 14, 2012 at 12:49:59PM +0300, Sami Farin wrote:
> > Hello,
> >
> > thanks for analyzing my logs =)
> > I tried usb-next kernel. It works much better with sanXi reader
> > (<20120824111628.usmh54g2iv2yx...@m.safari.iki.
On Fri, Sep 14, 2012 at 12:49:59PM +0300, Sami Farin wrote:
> Hello,
>
> thanks for analyzing my logs =)
> I tried usb-next kernel. It works much better with sanXi reader
> (<20120824111628.usmh54g2iv2yx...@m.safari.iki.fi> for more info),
> though not very fast read/write speeds (can xhci
On Thu, Sep 13, 2012 at 14:57:20 -0700, Sarah Sharp wrote:
> On Sat, Aug 25, 2012 at 12:31:46PM +0300, Sami Farin wrote:
...
> > I plugged rdf8 reader into usb3 port, mounted it (vfat),
> > cat garbage > out.bin , at the end ls showed a bit over 25200 byte file,
> > then empty dir listing (df s
On Thu, 13 Sep 2012, Sarah Sharp wrote:
> > I plugged rdf8 reader into usb3 port, mounted it (vfat),
> > cat garbage > out.bin , at the end ls showed a bit over 25200 byte file,
> > then empty dir listing (df showed input/output error). When mounted
> > with rdf8 reader plugged into usb2 port
On Sat, Aug 25, 2012 at 12:31:46PM +0300, Sami Farin wrote:
> On Sat, Aug 25, 2012 at 15:10:13 +0800, Andiry Xu wrote:
> ...
> > >
> > > 3.6.0-rc2-g6dab7ede has some funny printk's , but it panics on network use
> > > so I am back to 3.5.0-rc7-g84a1caf:
> > >
> > > <5>[5.163846] scsi 10:0:0:0:
On Sat, Aug 25, 2012 at 12:31:46 +0300, Sami Farin wrote:
>...
Did you get the email (360 kB), it did not show up at marc.info
but I did not get delivery status notifications..?
I uploaded the xhci debug log here:
https://docs.google.com/open?id=0B_EMXtsx7o56eUw5dC10RDhTcmc
these with git/torval
On Fri, Aug 24, 2012 at 7:16 PM, Sami Farin wrote:
> On Sun, Jul 15, 2012 at 11:14:13 -0400, Alan Stern wrote:
> ...
>> In past years I have found that Genesys's devices tend to be rather
>> buggy. This card reader continues the tradition. Basically, although
>> the firmware works reasonably wel
On Fri, 24 Aug 2012, Sami Farin wrote:
> On Sun, Jul 15, 2012 at 11:14:13 -0400, Alan Stern wrote:
> ...
> > In past years I have found that Genesys's devices tend to be rather
> > buggy. This card reader continues the tradition. Basically, although
> > the firmware works reasonably well at high
On Sun, Jul 15, 2012 at 11:14:13 -0400, Alan Stern wrote:
...
> In past years I have found that Genesys's devices tend to be rather
> buggy. This card reader continues the tradition. Basically, although
> the firmware works reasonably well at high speed, the SuperSpeed
> support is too buggy to b
13 matches
Mail list logo