On Mon, Aug 06, 2012 at 01:22:53, Daniel Mack wrote:
On 03.08.2012 17:48, Hiremath, Vaibhav wrote:
On Fri, Aug 03, 2012 at 17:11:38, Daniel Mack wrote:
On 03.08.2012 11:07, Hiremath, Vaibhav wrote:
I have just pushed the code (V7 which Ravi submitted), so can you please
try
with below
On Monday 06 August 2012 07:21:29 Olivier Sobrie wrote:
This driver provides support for several Kvaser CAN/USB devices.
Such kind of devices supports up to three can network interfaces.
It has been tested with a Kvaser USB Leaf Light (one network interface)
connected to a pch_can interface.
Hi Heiko,
On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner he...@sntech.de wrote:
Hi Praveen,
Am Mittwoch, 1. August 2012, 15:05:47 schrieb Praveen Paneri:
This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable phy. Tested
Hi Praveen,
On 8/6/12, Praveen Paneri p.pan...@samsung.com wrote:
Hi Heiko,
On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner he...@sntech.de wrote:
Hi Praveen,
Am Mittwoch, 1. August 2012, 15:05:47 schrieb Praveen Paneri:
This driver uses usb_phy interface to interact with s3c-hsotg. Supports
On Sun, Aug 05, 2012 at 06:51:34PM -0700, kuninori.morimoto...@renesas.com
wrote:
We should avoid using BUG_ON() in drivers.
This patch switch to use WARN_ON() from BUG_ON(),
and avoid NULL pointer access by new macro.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
Hi Simon
Thank you for checking patch
+#define ehci_pdata_get(pdata, x) ((pdata) ? (pdata)-x : 0)
+
FWIW, I think that an inline function would be a slight improvement over
a macro here. Likewise for the 2nd patch of this series.
All these patches have this kind of macros.
I needs
Hi,
On Fri, Aug 03, 2012 at 08:01:44PM +0530, ABRAHAM, KISHON VIJAY wrote:
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int omap_usb2_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_usb *phy =
Hi,
On Mon, Jul 30, 2012 at 02:39:49PM +0530, Kishon Vijay Abraham I wrote:
This patch series adds device tree support for MUSB and device
tree support for all the related modules to get MUSB working in
OMAP platform.
A new omap-usb2 phy driver has been added (with only dt suppport)
to
On Mon, Aug 6, 2012 at 2:22 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Mon, Jul 30, 2012 at 02:39:49PM +0530, Kishon Vijay Abraham I wrote:
This patch series adds device tree support for MUSB and device
tree support for all the related modules to get MUSB working in
OMAP platform.
A new
Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
Hi Praveen,
On 8/6/12, Praveen Paneri p.pan...@samsung.com wrote:
Hi Heiko,
On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner he...@sntech.de wrote:
Hi Praveen,
Am Mittwoch, 1. August 2012, 15:05:47 schrieb Praveen Paneri:
Hi Felipe,
On Mon, Aug 6, 2012 at 2:19 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Fri, Aug 03, 2012 at 08:01:44PM +0530, ABRAHAM, KISHON VIJAY wrote:
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int omap_usb2_runtime_suspend(struct device *dev)
+{
+ struct
Pointers should not be compared to plain integers.
Quiets the sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: Ying Xue ying@windriver.com
---
drivers/usb/serial/ftdi_sio.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
On Mon, Aug 06, 2012 at 03:14:42PM +0530, ABRAHAM, KISHON VIJAY wrote:
+static int omap_usb2_runtime_resume(struct device *dev)
+{
+ u32 ret = 0;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_usb *phy = platform_get_drvdata(pdev);
+
+
Hi,
On Mon, Aug 6, 2012 at 2:53 PM, Heiko Stübner he...@sntech.de wrote:
Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
Hi Praveen,
On 8/6/12, Praveen Paneri p.pan...@samsung.com wrote:
Hi Heiko,
On Mon, Aug 6, 2012 at 3:24 AM, Heiko Stübner he...@sntech.de wrote:
Hi
From: Pratyush ANAND pratyush.an...@st.com
We need to issue DEPCFG (with Config Action Set to Modify) as per
specification. Even if we do not respect this , it works in normal
cases. But, I have observed one failure in very peculiar situation.
If cpu clock is very slow and execution of
I got a kernel panic when try hsotg of ok6410 which is based on s3c6410:
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Unable to handle kernel NULL pointer dereference at virtual address 0100
pgd = c0004000
[0100] *pgd=
Internal error: Oops: 5 [#1]
Hi,
On Mon, Aug 06, 2012 at 06:12:05PM +0800, Peiyong Feng wrote:
I got a kernel panic when try hsotg of ok6410 which is based on s3c6410:
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Unable to handle kernel NULL pointer dereference at virtual address
Add ocp2scp data node in omap4 device tree file.
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
arch/arm/boot/dts/omap4.dtsi |8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
This patch series is done as a preparatory step for adding phy drivers
for dwc3 and musb.
This series adds a new driver for ocp2scp (only dt) to which phy
drivers are connected.
Since currently there is no generic way to create a child device along
with doing a pm_runtime_enable (the exact
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
USB2PHY is connected to ocp2scp.
This also includes device tree support for ocp2scp driver and
the documentation with device tree binding
On Mon, Aug 06, 2012 at 04:55:30PM +0530, Kishon Vijay Abraham I wrote:
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
USB2PHY is connected to ocp2scp.
This also includes device tree
Hi,
On Mon, Aug 06, 2012 at 03:33:16PM +0530, Pratyush Anand wrote:
From: Pratyush ANAND pratyush.an...@st.com
We need to issue DEPCFG (with Config Action Set to Modify) as per
specification. Even if we do not respect this , it works in normal
cases. But, I have observed one failure in
This is first release of otg driver for the dwc3 Synopsys USB3 core.
The otg driver implements the otg final state machine and control the
activation of the device controller or host controller.
In this first implementation, only simple DRD mode is implemented,
determine if A or B device
Added device tree support for omap musb driver and updated the
Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 34 +++-
drivers/usb/musb/omap2430.c|
The mailbox register for usb otg in omap is present in control module.
On detection of any events VBUS or ID, this register should be written
to send the notification to musb core.
Till we have a separate control module driver to write to control module,
omap2430 will handle the register writes
This patch series adds device tree support for MUSB and device
tree support for all the related modules to get MUSB working in
OMAP platform.
A new omap-usb2 phy driver has been added (with only dt suppport)
to perform phy configurations. Previously this configuration was
performed by twl6030,
Add device tree support for twl6030 usb driver.
Update the Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
.../devicetree/bindings/usb/twl-usb.txt| 21 +++
drivers/usb/otg/twl6030-usb.c | 39
All the unnessary functions in omap-phy-internal is removed.
These functionality are now handled by omap-usb2 phy driver.
Cc: Felipe Balbi ba...@ti.com
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
Acked-by: Tony Lindgren t...@atomide.com
---
arch/arm/mach-omap2/omap_phy_internal.c | 138
All phy related programming like enabling/disabling the clocks, powering
on/off the phy is taken care of by this driver. It is also used for OTG
related functionality like srp.
This also includes device tree support for usb2 phy driver and
the documentation with device tree binding information is
Add device tree support for twl4030 usb driver.
Update the Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
.../devicetree/bindings/usb/twl-usb.txt| 19 ++
drivers/usb/otg/twl4030-usb.c |
All the PHY configuration other than VBUS, ID GND and OTG SRP are removed
from twl6030. The phy configurations are taken care by the dedicated
usb2 phy driver. So twl6030 is made as comparator driver for VBUS and
ID detection.
Writing to control module which is now handled in omap2430.c should be
Hi,
Hi,
On Mon, Aug 06, 2012 at 06:12:05PM +0800, Peiyong Feng wrote:
I got a kernel panic when try hsotg of ok6410 which is based on
s3c6410:
As you said, you are using the ok6410. And it is based on the s3c6410
CPU. S3C6410 is a single core CPU. I assume that ok6410 is also single
core?
Am Mittwoch, den 20.06.2012, 17:34 +0200 schrieb Paul Menzel:
Am Mittwoch, den 20.06.2012, 11:11 -0400 schrieb Alan Stern:
On Wed, 20 Jun 2012, Paul Menzel wrote:
[This message is more a less the same as sent to the Debian BTS
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678215.]
On Sun, Aug 5, 2012 at 11:26 PM, Rafael J. Wysocki r...@sisk.pl wrote:
---
drivers/base/power/runtime.c | 82
+++
include/linux/pm.h |1
include/linux/pm_runtime.h | 14 +++
3 files changed, 90 insertions(+), 7 deletions(-)
Add ocp2scp data node in omap4 device tree file.
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
arch/arm/boot/dts/omap4.dtsi |8
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
USB2PHY is connected to ocp2scp.
This also includes device tree support for ocp2scp driver and
the documentation with device tree binding
On 8/6/2012 5:28 PM, Felipe Balbi wrote:
Hi,
On Mon, Aug 06, 2012 at 03:33:16PM +0530, Pratyush Anand wrote:
From: Pratyush ANAND pratyush.an...@st.com
We need to issue DEPCFG (with Config Action Set to Modify) as per
specification. Even if we do not respect this , it works in normal
cases.
On Mon, 6 Aug 2012, Simon Horman wrote:
On Sun, Aug 05, 2012 at 06:51:34PM -0700, kuninori.morimoto...@renesas.com
wrote:
We should avoid using BUG_ON() in drivers.
This patch switch to use WARN_ON() from BUG_ON(),
and avoid NULL pointer access by new macro.
Signed-off-by: Kuninori
On Sun, 5 Aug 2012 kuninori.morimoto...@renesas.com wrote:
This patch enables to call platform specific power callback function.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
v2 - v3
- add power multi functions
- call it by macro
From: Justin P. Mattock justinmatt...@gmail.com
Signed-off-by: Justin P. Mattock justinmatt...@gmail.com
---
NOTE:I see *rc1 in the git web log, so hopefully its ok to send out.
The below patch fixes typos found while reading through staging usbip.
drivers/staging/usbip/stub_rx.c |2 +-
Hi,
On Mon, Aug 06, 2012 at 07:22:52PM +0530, Pratyush Anand wrote:
commit 4b345c9a3c7452340fb477868d8db475f05978b1
Author: Felipe Balbi ba...@ti.com
Date: Mon Jul 16 14:08:16 2012 +0300
usb: dwc3: gadget: set Ignore Sequence Number bit from ConnectDone Event
Databook says we
On Sun, 5 Aug 2012, Rafael J. Wysocki wrote:
I don't really think we'll need to store func_sync in dev-power. At least
I don't see a reason to do that at the moment.
You're right; I wasn't thinking straight.
I also think that func_sync() would have to be called if runtime PM is
disabled
On Sun, 5 Aug 2012, Tomas Sokorai wrote:
Here's after plugging in, but before the hang:
-
bus pci, device :00:04.0
OHCI Host Controller
ohci_hcd
OHCI 1.0, NO legacy support registers, rh state running
control 0x68f RWE RWC
On Mon, Aug 6, 2012 at 12:24 PM, Alan Stern st...@rowland.harvard.edu wrote:
any lines in the dmesg log from boot-up about enabled Compaq ZFMicro
chipset quirks?
Nope, no quirks message at all in the boot log.
Are you comfortable writing your own debugging patches, or would you
Quite
Hi Alan and Rafael,
Is there a reason why runtime PM is disabled by default for PCI USB host
controllers? It would really be nice to have this turned on by default
at boot, rather than running udev scripts or powertop.
Are there PCI USB hosts that can't handle D3? Or something else
preventing
Hello there,
I just ran the static analyser cppcheck over the source code of the
linux kernel version 3.6-rc1.
It said
linux-3.6-rc1/drivers/usb/host/ohci-tmio.c:105]: (warning) Redundant bitwise
operation on pm in switch
The source code is
switch (ohci-num_ports) {
default:
On Mon, 6 Aug 2012, David Binderman wrote:
Hello there,
I just ran the static analyser cppcheck over the source code of the
linux kernel version 3.6-rc1.
It said
linux-3.6-rc1/drivers/usb/host/ohci-tmio.c:105]: (warning) Redundant bitwise
operation on pm in switch
The source code
On Mon, 6 Aug 2012, Sarah Sharp wrote:
Hi Alan and Rafael,
Is there a reason why runtime PM is disabled by default for PCI USB host
controllers? It would really be nice to have this turned on by default
at boot, rather than running udev scripts or powertop.
As far as I know, the only
On Monday, August 06, 2012, Alan Stern wrote:
On Sun, 5 Aug 2012, Rafael J. Wysocki wrote:
[...]
What about the appended experimental patch?
For now, I think it would be best to start with a single func argument.
If it turns out that anyone really needs to have two separate
arguments,
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/hid/hid-core.c |3 +++
drivers/hid/hid-ids.h |3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 60ea284..b1ed8ee 100644
--- a/drivers/hid/hid-core.c
+++
Hi,
New USB input driver for eBeam devices.
Currently, only the Luidia eBeam classic projection model is supported.
Edge model and a NEC interactive video-projector support planned for the
end of the mounth.
Patch 1 to blacklist the device for hid generic-usb.
Patch 2 is the actual driver.
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/input/misc/ebeam.c | 764
1 file changed, 764 insertions(+)
create mode 100644 drivers/input/misc/ebeam.c
diff --git a/drivers/input/misc/ebeam.c b/drivers/input/misc/ebeam.c
new file
On Mon, Aug 06, 2012 at 11:21:43PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/hid/hid-core.c |3 +++
drivers/hid/hid-ids.h |3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index
On Mon, Aug 06, 2012 at 11:21:44PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/input/misc/ebeam.c | 764
1 file changed, 764 insertions(+)
create mode 100644 drivers/input/misc/ebeam.c
What adds
On Mon, Aug 06, 2012 at 11:21:42PM +0200, Yann Cantin wrote:
Hi,
New USB input driver for eBeam devices.
Currently, only the Luidia eBeam classic projection model is supported.
Edge model and a NEC interactive video-projector support planned for the
end of the mounth.
Patch 1 to
On Monday, August 06, 2012 02:43:40 PM Greg KH wrote:
On Mon, Aug 06, 2012 at 11:21:43PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/hid/hid-core.c |3 +++
drivers/hid/hid-ids.h |3 +++
2 files changed, 6 insertions(+)
diff
On Monday, August 06, 2012 02:44:23 PM Greg KH wrote:
On Mon, Aug 06, 2012 at 11:21:42PM +0200, Yann Cantin wrote:
Hi,
New USB input driver for eBeam devices.
Currently, only the Luidia eBeam classic projection model is supported.
Edge model and a NEC interactive video-projector
From: Steven J. Hill sjh...@mips.com
One line fix after 'struct ehci_regs' definition was changed
in commit a46af4ebf9ffec35eea0390e89935197b833dc61.
Signed-off-by: Steven J. Hill sjh...@mips.com
---
drivers/usb/host/ehci-sead3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On Mon, Aug 6, 2012 at 12:24 PM, Alan Stern st...@rowland.harvard.edu wrote:
any lines in the dmesg log from boot-up about enabled Compaq ZFMicro
chipset quirks?
BTW, I printk'ed the ohci-flags just to be sure what quirks were
enabled, and only the do not trust power was enabled.
My guess is
Hi,
Le 06/08/2012 23:43, Greg KH a écrit :
On Mon, Aug 06, 2012 at 11:21:44PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/input/misc/ebeam.c | 764
1 file changed, 764 insertions(+)
create mode
Hi Alan, Felipe, Greg
These are v4 of ehci/ohci-platform patches
Kuninori Morimoto (4):
usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
usb: host: ehci-platform: add platform specific power callback
usb:
usb_ehci_pdata is certainly required in ehci-platform driver.
This patch avoids using BUG_ON() from driver,
and return from probe with WARN_ON() if pdata was NULL.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
v3 - v4
- remove macro
- return probe if pdata was NULL
usb_ohci_pdata is certainly required in ohci-platform driver.
This patch avoids using BUG_ON() from driver,
and return from probe with WARN_ON() if pdata was NULL.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
v3 - v4
- remove macro
- return probe if pdata was NULL
This patch enables to call platform specific power callback function.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
v3 - v4
- remove macro
- remove .power_suspend
- check return value on resume
drivers/usb/host/ehci-platform.c | 40
This patch enables to call platform specific power callback function.
Signed-off-by: Kuninori Morimoto kuninori.morimoto...@renesas.com
---
v3 - v4
- remove macro
- remove .power_suspen
- check return value on resume
drivers/usb/host/ohci-platform.c | 36
Le 07/08/2012 00:07, Dmitry Torokhov a écrit :
On Monday, August 06, 2012 02:43:40 PM Greg KH wrote:
On Mon, Aug 06, 2012 at 11:21:43PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/hid/hid-core.c |3 +++
drivers/hid/hid-ids.h |3 +++
2
On Mon, Aug 6, 2012 at 10:47 PM, Alan Stern st...@rowland.harvard.edu wrote:
No, no, you have completely misunderstood the whole point of this
change.
Sorry, you are right. And the callback should be renamed as
'.runtime_post_resume', which should do something I/O related in
theory just after
On Tue, Aug 07, 2012 at 02:56:40AM +0200, Yann Cantin wrote:
Hi,
Le 06/08/2012 23:43, Greg KH a écrit :
On Mon, Aug 06, 2012 at 11:21:44PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
drivers/input/misc/ebeam.c | 764
Le 07/08/2012 00:09, Dmitry Torokhov a écrit :
On Monday, August 06, 2012 02:44:23 PM Greg KH wrote:
On Mon, Aug 06, 2012 at 11:21:42PM +0200, Yann Cantin wrote:
Hi,
New USB input driver for eBeam devices.
Currently, only the Luidia eBeam classic projection model is supported.
Edge model
On Tue, Aug 07, 2012 at 03:21:45AM +0200, Yann Cantin wrote:
Le 07/08/2012 00:07, Dmitry Torokhov a écrit :
On Monday, August 06, 2012 02:43:40 PM Greg KH wrote:
On Mon, Aug 06, 2012 at 11:21:43PM +0200, Yann Cantin wrote:
Signed-off-by: Yann Cantin yann.can...@laposte.net
---
2012/8/6 Lukasz Majewski l.majew...@samsung.com:
Hi,
Hi,
On Mon, Aug 06, 2012 at 06:12:05PM +0800, Peiyong Feng wrote:
I got a kernel panic when try hsotg of ok6410 which is based on
s3c6410:
As you said, you are using the ok6410. And it is based on the s3c6410
CPU. S3C6410 is a single
Hi,
On Mon, Aug 6, 2012 at 3:21 PM, Praveen Paneri p.pan...@samsung.com wrote:
Hi,
On Mon, Aug 6, 2012 at 2:53 PM, Heiko Stübner he...@sntech.de wrote:
Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
Hi Praveen,
On 8/6/12, Praveen Paneri p.pan...@samsung.com wrote:
Hi Heiko,
From: Pratyush ANAND pratyush.an...@st.com
For core 1.94A and latter, specification says to issue DEPCFG with
Config Action: Modify for physical endpoint 0/1.
Signed-off-by: Pratyush Anand pratyush.an...@st.com
---
drivers/usb/dwc3/gadget.c |8 ++--
1 files changed, 6 insertions(+), 2
On 8/7/12, Praveen Paneri p.pan...@samsung.com wrote:
Hi,
On Mon, Aug 6, 2012 at 3:21 PM, Praveen Paneri p.pan...@samsung.com
wrote:
Hi,
On Mon, Aug 6, 2012 at 2:53 PM, Heiko Stübner he...@sntech.de wrote:
Am Montag, 6. August 2012, 10:23:52 schrieb Kyungmin Park:
Hi Praveen,
On 8/6/12,
Hi,
Now another person try to use drivers/usb/phy for it.
usb: phy: samsung: Introducing usb phy driver for hsotg
Can you use it instead of previous one?
Thank you,
Kyungmin Park
On 8/6/12, Dongjin Kim tobet...@gmail.com wrote:
This patch support to control USB HSIC of EXYNOS4,
edited based
From: Moiz Sonasath m-sonas...@ti.com
This patch fixes the following sparse warnings:
drivers/usb/dwc3/gadget.c:1096:7: warning: symbol 'ret' shadows an earlier one
drivers/usb/dwc3/gadget.c:1058:8: originally declared here
drivers/usb/dwc3/gadget.c:1100:16: warning: symbol 'dwc' shadows an
76 matches
Mail list logo