On Fri, Jul 06, 2007 at 10:09:39AM -0300, Ana Ravena Alcantara da Costa wrote:
> Hello!
> I am working with a kernel 2.4.25 embedded in a processor mpc5xxx from
> Freescale.
> I'm trying to make USB work at this kernel, but some details are still a
> litle obscure to me.
> All USB drivers are worki
On 7/10/07, Alan Stern <[EMAIL PROTECTED]> wrote:
> On Tue, 10 Jul 2007, jian tao wrote:
>
> > Yes, the SD card wasn't detected even i plug SD card in reader first
> > and then boot up linux kernel. From dmesg, it seems to me SD fail to
> > reply host TEST_UNIT_READY command. Maybe it is the proble
On Tue, 10 Jul 2007, jian tao wrote:
> Yes, the SD card wasn't detected even i plug SD card in reader first
> and then boot up linux kernel. From dmesg, it seems to me SD fail to
> reply host TEST_UNIT_READY command. Maybe it is the problem between
> USB2227 and SD card.
Maybe.
> You mentioned H
On 7/9/07, Alan Stern <[EMAIL PROTECTED]> wrote:
> On Mon, 9 Jul 2007, jian tao wrote:
>
> > Hi pals,
> >
> > I am a new guy of linux usb driver. I met a problem with detecting SD
> > card under linux2.6.11. My developing board: MPC8349 EHCI host -->
> > ISP1505 (usb PHY) --->USB2227 (SMSC Flash ca
On Mon, 9 Jul 2007, Felipe Balbi wrote:
> Hello all,
>
> How could I suspend/resume a usb device using libusb? I saw there's a
> function for reseting the device but what about suspending/resuming
> it?
There's no way to do it using libusb or usbfs. However you can suspend
or resume a usb devi
On Mon, 9 Jul 2007 10:52:05 -0400 (EDT), Alan Stern <[EMAIL PROTECTED]> wrote:
> > Then i plug in SD card, nothing could happen, it fail to find scsi
> > device. I know there would be three kernel threads to polling current
> > usb status. One is "hub_thread" to polling port status; one is
> > "u
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/mos7720.c | 10 --
1 files changed, 10 deletions(-)
diff -puN
drivers/usb/serial/mos7720.c~mos7720-re
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/io_edgeport.c |9 -
drivers/usb/serial/io_ti.c |8
2 files changed, 17 deletions(-
From: Matthias Kaehlcke <[EMAIL PROTECTED]>
Low performance USB storage driver: Use list_for_each_entry() instead
of list_for_each()
Signed-off-by: Matthias Kaehlcke <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Cc: Pete Zaitcev <[EMAIL PROTECTED]>
Cc: Jens Axboe <[EMAIL PROTECTED]>
Signed-
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/Makefile |1 -
1 files changed, 1 deletion(-)
diff -puN
drivers/usb/Makefile~usb-remove-makefile-reference-to-obsolete-ohci_at91
From: Oliver Neukum <[EMAIL PROTECTED]>
Fix an oops that happens in relation with applying work arounds for buggy
ftdi_sio devices. The quirks were handled too early because due to changes in
the initialisation of usb serial devices the device was not fully initialised
when the old hook was calle
From: Yinghai Lu <[EMAIL PROTECTED]>
So we can use dev_to_node(&usb_dev->dev) later in kmalloc_node to dma buffer
Signed-off-by: Yinghai Lu <[EMAIL PROTECTED]>
Cc: Andi Kleen <[EMAIL PROTECTED]>
Acked-by: Christoph Lameter <[EMAIL PROTECTED]>
Cc: David Rientjes <[EMAIL PROTECTED]>
Cc: Greg KH <[E
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/visor.c |8
drivers/usb/serial/whiteheat.c |9 -
2 files changed, 17 deletions(-)
d
From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/serial/pl2303.c | 33 +
1 files changed, 1 insertion(+), 32 deletions(-)
diff -puN
d
From: Jan Engelhardt <[EMAIL PROTECTED]>
Generally, Jens Axboe was against 'default y', so I'll have some patches to
remove it.
Cc: Greg KH <[EMAIL PROTECTED]>
Cc: Jens Axboe <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/Kconfig |1 -
1 files changed,
From: Andrew Morton <[EMAIL PROTECTED]>
avoid sleep-in-spinlock.
Cc: Greg KH <[EMAIL PROTECTED]>
Cc: Mattia Dongili <[EMAIL PROTECTED]>
Cc: Stuart Hayes <[EMAIL PROTECTED]>
Cc: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/usb/host/ehci-hcd.c |
From: Alan Cox <[EMAIL PROTECTED]>
The MOS driver is "interesting", in a bad kind of 'how the hell did this
get merged' kind of way
- Remove the bogus termios change check
- Remove the duplicate code for half the ioctls
- Remove the supporting code to duplicate the ioctl code
Signed-off-by: Alan
From: Venki Pallipadi <[EMAIL PROTECTED]>
Make usb autosuspend timers 1sec jiffy aligned.
This helps to reduce the frequency at which the CPU must be taken out of a
lower-power state.
Signed-off-by: Venkatesh Pallipadi <[EMAIL PROTECTED]>
Cc: Greg KH <[EMAIL PROTECTED]>
Signed-off-by: Andrew Mor
btw, it can also be using usb devicefs, anyone of these will help ;-)
thanks
On 7/9/07, Felipe Balbi <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> How could I suspend/resume a usb device using libusb? I saw there's a
> function for reseting the device but what about suspending/resuming
> it?
>
> An
Hello all,
How could I suspend/resume a usb device using libusb? I saw there's a
function for reseting the device but what about suspending/resuming
it?
And also, does EHCI (on recent linux-linus' git tree) support
SINGLE_STEP_GET_DESCRIPTOR and SINGLE_STEP_SET_FEATURE ???
Thanks in advance
--
On Sun, 8 Jul 2007, Phil Dibowitz wrote:
> With a bit of help, I've found the device has a handful of standard "Vendor"
> control commands. But when I try to send them with usb_control_msg(), I'm
> getting back 'Broken pipe'.
>
> The only thing I can think of is that I'm not assembling my request
On Mon, 9 Jul 2007, Oliver Neukum wrote:
> Am Montag, 9. Juli 2007 schrieb Alan Stern:
> > On Mon, 9 Jul 2007, Oliver Neukum wrote:
> >
> > > Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> > > > This patch (as929) adds usb_autopm_get_interface_burst() to the
> > > > autosuspend programming interf
Am Montag, 9. Juli 2007 schrieb Alan Stern:
> On Mon, 9 Jul 2007, Oliver Neukum wrote:
>
> > Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> > > This patch (as929) adds usb_autopm_get_interface_burst() to the
> > > autosuspend programming interface. It is intended for situations
> > > where I/O ev
On Sun, 8 Jul 2007, Michal Piotrowski wrote:
> Hi Daniel,
>
> On 08/07/07, Daniel J Blueman <[EMAIL PROTECTED]> wrote:
> > When plugging in a USB 2 mass-storage device which I've been seeing
> > problems with, I caught a khubd oops [1]. Kernel is 2.6.22-rc7
> > [ 4771.448000] BUG: unable to hand
On Mon, 9 Jul 2007, Oliver Neukum wrote:
> Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> > @@ -1028,6 +1039,7 @@ static int storage_probe(struct usb_inte
> > * start it up. */
> > scsi_host_get(us_to_host(us));
> > atomic_inc(&total_threads);
> > + usb_autopm_get_in
On Mon, 9 Jul 2007, Oliver Neukum wrote:
> Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> > This patch (as929) adds usb_autopm_get_interface_burst() to the
> > autosuspend programming interface. It is intended for situations
> > where I/O events occur in bursts of activity; it reduces overhead by
On Mon, 9 Jul 2007, jian tao wrote:
> Hi pals,
>
> I am a new guy of linux usb driver. I met a problem with detecting SD
> card under linux2.6.11. My developing board: MPC8349 EHCI host -->
> ISP1505 (usb PHY) --->USB2227 (SMSC Flash card Reader chip). When
> linux booting, i would success to det
On Sat, Jun 30, 2007 at 06:46:14AM -0700, David Brownell wrote:
>
> Has someone actually signed up to develop and maintain such a
> controller driver? If so, that would be a Fine Thing, but not
> one I've heard rumored before. I've assumed that the best we'd
> have is someone (Rodolfo?!) finally
Sehr geehrte Damen und Herren,
in dem E-Mail mit dem Betreff '[linux-usb-devel] Mail delivery failed:
returning message to sender'
(gesendet am Mon, 09 Jul 2007 11:57:46 +0200) mit der angegebenen
Absenderadresse 'Mail Delivery System <[EMAIL PROTECTED]>' wurde der
Virus 'W32.Sality.Q-1' gefunden
linux-usb-devel should be CCed on this
On Sun, 8 Jul 2007, Daniel J Blueman wrote:
> When plugging in a USB 2 mass-storage device which I've been seeing
> problems with, I caught a khubd oops [1]. Kernel is 2.6.22-rc7 on ia32
> built with Ubuntu's 2.6.22 .config.
>
> Let me know if you need more
Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> @@ -1028,6 +1039,7 @@ static int storage_probe(struct usb_inte
> * start it up. */
> scsi_host_get(us_to_host(us));
> atomic_inc(&total_threads);
> + usb_autopm_get_interface(intf); /* dropped in the scanning thread */
>
Am Freitag, 6. Juli 2007 schrieb Alan Stern:
> This patch (as929) adds usb_autopm_get_interface_burst() to the
> autosuspend programming interface. It is intended for situations
> where I/O events occur in bursts of activity; it reduces overhead by
> not cancelling the device's autosuspend timer.
32 matches
Mail list logo
