A new OHCI card on my pentium machine does the trick nicely. Thanks
for all your help guys.
--
Colin Paul Adams
Preston Lancashire
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
len 512 ret -84
usbdevfs: USBDEVFS_BULK failed dev 3 ep 0x85 len 512 ret -84
usb.c: USB disconnect on device 00:04.2-2 address 3
--
Colin Paul Adams
Preston Lancashire
---
This sf.net email is sponsored by:ThinkGeek
Welcome
>>>>> "Colin" == Colin Paul Adams <[EMAIL PROTECTED]> writes:
>>>>> "Randy" == Randy Dunlap <[EMAIL PROTECTED]> writes:
Randy> It would be good to post the errors that you saw...
Colin> In fact I was using a RedHat n
>>>>> "Randy" == Randy Dunlap <[EMAIL PROTECTED]> writes:
Randy> It would be good to post the errors that you saw...
In fact I was using a RedHat non-SMP config file as the basis, rather
than then smp one which is effectively what I use now - trying again
>>>>> "Duncan" == Duncan Sands <[EMAIL PROTECTED]> writes:
Duncan> Did you try the 2.4.20 kernel, or a 2.4.21-pre one.
No - it didn't compile cleanly.
--
Colin Paul Adams
Preston Lancashire
---
This
>>>>> "Duncan" == Duncan Sands <[EMAIL PROTECTED]> writes:
Duncan> Did you try the 2.4.20 kernel, or a 2.4.21-pre one.
No - only 2.4.18.
Is it worth trying 2.4.20 then?
--
Colin Paul Adams
Preston Lancashire
--
>>>>> "Colin" == Colin Paul Adams <[EMAIL PROTECTED]> writes:
Colin> Another option, if it is the hardware, might be to buy a
Colin> USB card. is this a possible solution, with USB already on
Colin> the motherboard?
But a better solution still
Another option, if it is the hardware, might be to buy a USB card. is
this a possible solution, with USB already on the motherboard?
--
Colin Paul Adams
Preston Lancashire
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven
devfs: USBDEVFS_BULK failed dev 2 ep 0x5 len 991 ret -110
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -84
usb.c: USB disconnect on device 2
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device 3 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
ompatible controller: nVidia Corporation NV6 [Vanta] (rev 15)
--
Colin Paul Adams
Preston Lancashire
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
___
[E
10 matches
Mail list logo
