Hi,
I am using the isp1362-hcd driver on a cutom PXA board ... It works okay but
the ethernet get disabled once the isp driver comes up (without isp1362-hcd
ethernet works fine) . has anyone faced this problem earlier (with
ethernet or any other device) ?
Regards,
Vishal
playlist with my board, i see that i get a slab corruption kernel
crash(See below). Any ideas on what i may be doing wrong?
warm regards,
Vishal
**
Unable to handle kernel paging request at virtual address 6c756f42
pgd
) function is
not run how can i get it running ?
Thanks in advance,
Regards,
Vishal
---
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and
cared .. then i enabled the CHIP_BUFFER_TEST to realise it fails .
Could some one tell me why the buffer test would fail ?
Regards,
Vishal
driver isp1362-hcd, 2005-04-04
IRQ27 (GPIO4): <7>falling <7>edges
isp1362-hcd isp1362-hcd0: ISP1362 Host Controller
isp1362_hc_reset:
isp1
Hi,
I am trying to port the isp1362-hcd driver on a custom PXA-255 board, and am
unable to make register read/write. ISP1362 is on CS2 ie DEX_USB_HOST_PHYS is
defined as PXA_CS2_PHYS.
I am attaching the platform file .
thanks in advance,
Regards,
Vishal
static struct map_desc dex_io_desc
Hi,
I am trying to port the isp1362-hcd driver on a custom PXA-255 board, and am
unable to make register read/write.
Why are two types of delay functions used ? which is better ?
Regards,
Vishal
---
This SF.Net email is sponsored by xPML
February 2006 10:09 pm, Vishal Borker wrote:
Hi all,
A quick question. I am trying to get the gadgetfs up on my dev board. I
loaded the Low level controller driver, and loaded the gadgetfs module
over it. Cant see to see the /dev/gadgetfs/ directory. Am i missing
something. New to gadgetfs
,
Vishal
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as
,
Vishal
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as
-
From: "Alan Stern" <[EMAIL PROTECTED]>
To: "vishal" <[EMAIL PROTECTED]>
Cc: "linux usb devel"
Sent: Thursday, November 17, 2005 9:11 PM
Subject: Re: [linux-usb-devel] Gadget Controller driver
| On Thu, 17 Nov 2005, vishal wrote:
|
| > thank
Here is the dump from dmesg with the verbose option enabled in the driver:
DM320 : DM320 USB Peripheral Controller (test version 1.0)
DM320 : version: 2005 September 01, Vishal Borker ( [EMAIL PROTECTED] )
Interrupt: RESET Interrupt
g_file_storage DM320 Gadget-lun0: open backing file: /flash_media
the stipulated time?
warm regards,
Vishal
- Original Message -
From: "Greg KH" <[EMAIL PROTECTED]>
To: "vishal" <[EMAIL PROTECTED]>
Cc: "Alan Stern" <[EMAIL PROTECTED]>; "linux usb devel"
Sent: Tuesday, October 25, 2005 11:
| Alern Stern wrote:
| I can't recall any problems with the 2.6.5 version of g_file_storage, but
| that was so long ago it doesn't mean much. More recent versions are
| indeed stable and well-tested.
|
| There's one thing you need to watch out for, when writing a controller
| driver for use with g
uld be very welcome.
I somehow want to get a device working and be certain that the driver i
have written is pukka.
warm regards,
Vishal
*pukka: meaning perfect,
---
This SF.Net email is sponsored by:
Power Architecture Resource Center: F
hasnt been
rolled out into the official kernel. Where can i get hold of OTG patches?
Also any ideas on USB core support on the TI DM320 ??
warm regards,
Vishal
---
SF.Net email is Sponsored by the Better Software Conference & EXPO
Septembe
nux 2.4.31 kernel USB code.
In the Non working keyboards, i am getting a -EPIPE error when the LED keys
are pressed. the message reads:
"usbkbd.c: led urb status -32 received"
Could someone throw some light on such a behaviour?
base 2.4.16 kernel.
warm regards,
Vishal
---
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to
timer1 to generate the 1ms
interrupt instead. However, i suppose this would require a h/w change?
If anyone has any clues on this problem, it would be of great help if you could
reply.
Thanks in advance.
regards,
Vishal
--
timer1 to generate the 1ms
interrupt instead. However, i suppose this would require a h/w change?
If anyone has any clues on this problem, it would be of great help if you could
reply.
Thanks in advance.
regards,
Vishal
--
would any MPC-peoples out here help on figuring this out? :-)
I read something about some microcode patch for MPC processors. If someone could
tell me what that does, it would be helpfull.
regards,
Vishal
---
This SF.Net email sp
ide me on would be greatly appreciated. Your help will be appreciated.
thanks a regards,
Vishal
---
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
di
21 matches
Mail list logo
