Hi,
Selon Anand Kumria <[EMAIL PROTECTED]>:
> Hi,
>
> Not sure if the problem is the ueagle-atm driver, or the usbatm one
> (hence the cross post).
>
> I have a Sagem Fast 800 and when I plug it in, the kernel recognises it and
> loads the firmware. The modem itself never seems to become operatio
Hi Matthieu,
On Wed, Jul 19, 2006 at 03:43:31PM +0200, [EMAIL PROTECTED] wrote:
> Hi,
>
> Selon Anand Kumria <[EMAIL PROTECTED]>:
>
> > Hi,
> >
> > Not sure if the problem is the ueagle-atm driver, or the usbatm one
> > (hence the cross post).
> >
> > I have a Sagem Fast 800 and when I plug it i
On Thu, 20 Jul 2006, Anand Kumria wrote:
> Below is the diff between before and after attached the modem, (i've
> attached the full output as well). I wasn't sure if I should use
> num_snd_urbs or num_rcs_urbs. I tried initially with num_rcv_urbs=1 and
> then with both num_rcv_urbs=1 and num_snd_
> Recently people have reported a bug affecting ADSL modems in the UHCI
> driver for 2.6.17. Perhaps it is related to your problem.
This is likely a different problem, since it seems to be about isochronous
urbs unlike the speedtouch modem problem.
> The driver in 2.6.18-rc2 seems to work better
Hi,
Duncan Sands wrote:
>>Recently people have reported a bug affecting ADSL modems in the UHCI
>>driver for 2.6.17. Perhaps it is related to your problem.
>
>
> This is likely a different problem, since it seems to be about isochronous
> urbs unlike the speedtouch modem problem.
>
BTW, I beli
On Thu, 20 Jul 2006, matthieu castet wrote:
> Hi,
>
> Duncan Sands wrote:
> >>Recently people have reported a bug affecting ADSL modems in the UHCI
> >>driver for 2.6.17. Perhaps it is related to your problem.
> >
> >
> > This is likely a different problem, since it seems to be about isochrono
