A number of platforms have differences in the way the NDP register (in roothub_a) reports the number of ports present. This patch allows the platform specific code to optionally supply the number of ports. The driver just reads the value at init (if not supplied) instead of reading it every time its needed.
It also sets the value correctly for the ARM pxa27x architecture. Signed-Off-By: Richard Purdie <[EMAIL PROTECTED]> Index: linux-2.6.12/drivers/usb/host/ohci-dbg.c =================================================================== --- linux-2.6.12.orig/drivers/usb/host/ohci-dbg.c 2005-08-25 15:53:19.000000000 +0100 +++ linux-2.6.12/drivers/usb/host/ohci-dbg.c 2005-08-25 15:55:38.000000000 +0100 @@ -228,23 +228,22 @@ char **next, unsigned *size) { - u32 temp, ndp, i; + u32 temp, i; temp = roothub_a (controller); if (temp == ~(u32)0) return; - ndp = (temp & RH_A_NDP); if (verbose) { ohci_dbg_sw (controller, next, size, - "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d\n", temp, + "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp, ((temp & RH_A_POTPGT) >> 24) & 0xff, (temp & RH_A_NOCP) ? " NOCP" : "", (temp & RH_A_OCPM) ? " OCPM" : "", (temp & RH_A_DT) ? " DT" : "", (temp & RH_A_NPS) ? " NPS" : "", (temp & RH_A_PSM) ? " PSM" : "", - ndp + (temp & RH_A_NDP), controller->num_ports ); temp = roothub_b (controller); ohci_dbg_sw (controller, next, size, @@ -266,7 +265,7 @@ ); } - for (i = 0; i < ndp; i++) { + for (i = 0; i < controller->num_ports; i++) { temp = roothub_portstatus (controller, i); dbg_port_sw (controller, i, temp, next, size); } Index: linux-2.6.12/drivers/usb/host/ohci-hcd.c =================================================================== --- linux-2.6.12.orig/drivers/usb/host/ohci-hcd.c 2005-08-25 15:53:19.000000000 +0100 +++ linux-2.6.12/drivers/usb/host/ohci-hcd.c 2005-08-25 15:55:38.000000000 +0100 @@ -485,6 +485,10 @@ // flush the writes (void) ohci_readl (ohci, &ohci->regs->control); + /* Read the number of ports unless overridden */ + if (ohci->num_ports == 0) + ohci->num_ports = roothub_a(ohci) & RH_A_NDP; + if (ohci->hcca) return 0; @@ -561,10 +565,8 @@ msleep(temp); temp = roothub_a (ohci); if (!(temp & RH_A_NPS)) { - unsigned ports = temp & RH_A_NDP; - /* power down each port */ - for (temp = 0; temp < ports; temp++) + for (temp = 0; temp < ohci->num_ports; temp++) ohci_writel (ohci, RH_PS_LSDA, &ohci->regs->roothub.portstatus [temp]); } @@ -861,7 +863,7 @@ * and that if we try to turn them back on the root hub * will respond to CSC processing. */ - i = roothub_a (ohci) & RH_A_NDP; + i = ohci->num_ports; while (i--) ohci_writel (ohci, RH_PS_PSS, &ohci->regs->roothub.portstatus [temp]); Index: linux-2.6.12/drivers/usb/host/ohci-hub.c =================================================================== --- linux-2.6.12.orig/drivers/usb/host/ohci-hub.c 2005-08-25 15:53:19.000000000 +0100 +++ linux-2.6.12/drivers/usb/host/ohci-hub.c 2005-08-25 15:55:38.000000000 +0100 @@ -184,7 +184,7 @@ if (status != -EINPROGRESS) return status; - temp = roothub_a (ohci) & RH_A_NDP; + temp = ohci->num_ports; enables = 0; while (temp--) { u32 stat = ohci_readl (ohci, @@ -304,7 +304,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ports, i, changed = 0, length = 1; + int i, changed = 0, length = 1; int can_suspend = hcd->can_wakeup; unsigned long flags; @@ -319,26 +319,18 @@ goto done; } - ports = roothub_a (ohci) & RH_A_NDP; - if (ports > MAX_ROOT_PORTS) { - ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports, - ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP); - /* retry later; "should not happen" */ - goto done; - } - /* init status */ if (roothub_status (ohci) & (RH_HS_LPSC | RH_HS_OCIC)) buf [0] = changed = 1; else buf [0] = 0; - if (ports > 7) { + if (ohci->num_ports > 7) { buf [1] = 0; length++; } /* look at each port */ - for (i = 0; i < ports; i++) { + for (i = 0; i < ohci->num_ports; i++) { u32 status = roothub_portstatus (ohci, i); if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC @@ -395,15 +387,14 @@ struct usb_hub_descriptor *desc ) { u32 rh = roothub_a (ohci); - int ports = rh & RH_A_NDP; u16 temp; desc->bDescriptorType = 0x29; desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; - desc->bNbrPorts = ports; - temp = 1 + (ports / 8); + desc->bNbrPorts = ohci->num_ports; + temp = 1 + (ohci->num_ports / 8); desc->bDescLength = 7 + 2 * temp; temp = 0; @@ -421,7 +412,7 @@ rh = roothub_b (ohci); memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); desc->bitmap [0] = rh & RH_B_DR; - if (ports > 7) { + if (ohci->num_ports > 7) { desc->bitmap [1] = (rh & RH_B_DR) >> 8; desc->bitmap [2] = 0xff; } else Index: linux-2.6.12/drivers/usb/host/ohci.h =================================================================== --- linux-2.6.12.orig/drivers/usb/host/ohci.h 2005-08-25 15:53:19.000000000 +0100 +++ linux-2.6.12/drivers/usb/host/ohci.h 2005-08-25 15:55:38.000000000 +0100 @@ -321,7 +321,6 @@ #define RH_A_NOCP (1 << 12) /* no over current protection */ #define RH_A_POTPGT (0xff << 24) /* power on to power good time */ - /* hcd-private per-urb state */ typedef struct urb_priv { struct ed *ed; @@ -383,6 +382,7 @@ /* * driver state */ + int num_ports; int load [NUM_INTS]; u32 hc_control; /* copy of hc control reg */ unsigned long next_statechange; /* suspend/resume */ Index: linux-2.6.12/drivers/usb/host/ohci-pxa27x.c =================================================================== --- linux-2.6.12.orig/drivers/usb/host/ohci-pxa27x.c 2005-08-25 15:53:19.000000000 +0100 +++ linux-2.6.12/drivers/usb/host/ohci-pxa27x.c 2005-08-25 15:57:33.000000000 +0100 @@ -258,6 +258,9 @@ ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); + /* The value of NDP in roothub_a is incorrect on this hardware */ + ohci->num_ports = 3; + if ((ret = ohci_init(ohci)) < 0) return ret; ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel