> Hi subhash,
>
> What was the PHY Chip u have used. My PHY Chip is SMSC USB3300 ,
> which has an reset pin, but is not connected to any pin, but is left
> as an input,
> We are trying to find it out. Thanks for ur timely help.
>
> Did u come across the same problem of not getting interrupts when u
> Hi Subhash,
> Thanks for ur comments,
> My PHY chip is SMSC USB3300 chip which is ULPI Compliant,
> I have gone through the pin diagram of this Chip, There is a pin - 9
> in this chip which is the RESET pin for this chip, But i dont see any
> external reset button facility for this purpose.
>
> I
Hi Rakesh,
> Hi Subash,
>
> I am using ARC HS-OTG Core with ULPI Interface. Hope the ARC PHY u are
> referring to is this ULPI interface.
That means you do have ULPI tranceiver chip, that actually provides USB
PHY interface. BTW, it's not ARC PHY here.
> My kernel is 2.6.16-11, the thing is that
> Hi all,
> We are testing EHCI driver for ARC based controller core on a ARM 926
> board.
> The platform glue has been written. The driver is compiled to the
> kernel . When the kernel boots up , the driver is loaded.
>
I used the similar setup, ARC EHCI core with ARM borad. I implemented bus
glue
Hi all,
We are testing EHCI driver for ARC based controller core on a ARM 926 board.
The platform glue has been written. The driver is compiled to the
kernel . When the kernel boots up , the driver is loaded.
We have enabled USB_DEBUG and then going through the prints, its is
observed that the
ro
