This is a Linux USB list, not Windows. However, it sounds like you have a
hardware problem (no usb port). You need to buy an PCI USB interface
cards. Most computer stores will have one. I don't know of a parallel to
USB device.
On Mon, 13 Oct 2003, JEANNETTE MCCARTNEY wrote:
> I run windows 98 an
I run windows 98 and my computer was made in 1998. Per the test it does
support USB, however, there is no port. I just got a printer that connects
thru USB. Is there an adapter I can buy and plug it into the existing
printer cable port, or do I need to get a specific USB port added to my
tower?
On Tue, 14 Oct 2003 13:42:41 +1000 Zebee Johnstone <[EMAIL PROTECTED]> wrote:
| I'm still trying to get my NEO 25 IV working.
|
| I've tried the "tag" patch, both Gunther Meyer's and Leif Sawyer's
| versions, and no go. THe device is seen, but no information is
| sent - which is apparently a kn
I'm still trying to get my NEO 25 IV working.
I've tried the "tag" patch, both Gunther Meyer's and Leif Sawyer's
versions, and no go. THe device is seen, but no information is
sent - which is apparently a known problem with the chip.
but other people using devices with that chip have apparently
Stephen,
Thanks a bunch I will give it a try.
John
From: "Stephen J. Gowdy" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: "John K." <[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: [Linux-usb-users] can't get Atech 9-1 to work
Date: Mon, 13 Oct 2003 18:20:27 -0700 (PDT)
You probably
You probably need sd_mod loaded. Read the User Guide and FAQ at
http://www.linux-usb.org . BTW, you should update to the 2.4.20-20.9
kernel as the one you have will not show the other card types (assuming
this is a multi-lun device), I discovered this the other day after doing a
fresh install of RH
>From http://www.linux-usb.org/usb2.html;
"If you're a 2.4 user, use 2.4.22-pre1 or later. That closely matches the
Linux 2.6.0-test EHCI code, which seems to resolve the worst problems
reported. (VT6202 problems still seem to remain, especially on 2.4
kernels.) Remember this is still classified a
I am somewhat new to the linux world... so if someone has the time a little
help would be greatly appreciated. I am trying to connect my Atech 9-1 to
work. It reads those flash cards that come with digital cameras.
Below shows what is showing up in the relavant areas. The bottom line is
tha
Hello,
when trying to access a compact flash card, I get such an error message:
/etc/hotplug/usb.agent: Bad USB agent invocation
Any hints?
Thanks
Cornelius
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net host
hi there,
i'm using the 2.4.20 kernel with a jvc mpxp7250 subnotebook. while loading
the
usb drivers i get the following:
--snip--
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xd88da000, IRQ 11
usb-ohci.c: usb-00:0f.0, NEC Corporation USB
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 14 Oct 2003 00:52 am, Frank Schafer wrote:
> Is there some user space software out there to switch this feature on /
> off. If I travel I don't want to waste the power of the notebook akku to
> cherge the battery of the handy. At home - of cour
Hi !
I'm using a mobile DVD burner at my PC. It's a LG GSA4040B. It can
write +r/-r, +rw/-rw and -ram. The + and - stuff is working quite
good. But the -ram stuff doesnt really work. I just can write to the
media upto 700 MB and this only with cdrecord. I know that this
is wrong, a dvd-ram should
Hello
I tried connecting a PXA255 board over USB using the usb-eth module, but
as soon as I do
ifconfig usb0 x.y.z.w up
I get infinite messages
usb-uhci.c: uhci_submit_urb: pipesize for pipe c0010980 is zero
interrupts on the PC side don't increase (after an initial 20-30), same on
the PXA side. U
BTW, for those who don't know an handy is a mobile/cell phone (it mobile
in UK and cell in US).
On Mon, 13 Oct 2003, Frank Schafer wrote:
> Hi all,
>
> I have a laptop connected via USB serial to a handy. The USB port can
> additional charge the battery of the handy.
>
> Is there some user space
Hi all,
I have a laptop connected via USB serial to a handy. The USB port can
additional charge the battery of the handy.
Is there some user space software out there to switch this feature on /
off. If I travel I don't want to waste the power of the notebook akku to
cherge the battery of the h
Hi,
i'm trying to upgrade my (crux1.2) linux installation to kernel 2.6
(test6-7) but i've got problem making my wlan work.
I'm using linux-wlan-ng 0.2.1pre13 under kernel 2.4.21 and my dlink usb
nic works without problems; moving to 2.6 i upgraded to
module-init-tools,
generated modprobe.conf,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
I wanted to try the test- kernels a shot, and suprisingly everythings works
flawlessly but usb-storage. I have DIVA MP3 Player (with latest firmware).
It's works in 2.4 kernel, when I attach it and try to mount it, I get the following
output in
Dear Sales,
I am interesting with to do bussiness with your
company.
So i write this email to ask you if may be i can order it
from you for some products. My name is Sandi Sumanta from
Yogyakarta-Indonesia, and would like to order from
you for products below:
SONY DSR590 (PAL)
QUANTITY 1 unit.
18 matches
Mail list logo
