Hi all,
I have installed FC6 with all current updates. I have this connected
to an Iogear KVM switch 4 port Miniview model GCS1744. With the usb hub
of the kvm switch connected to the FC6 computer it will not boot! It
hangs with the error
usb 1-1.1: filed to restore interface 0 altsetting 0
YO Sir
Don't tell me why your woody is so small,
I will better help you to make it really Bigger!
Why bigger? Because over 72% of all women need a longer
thing to satisfy their desire!
Go there and get your solution: http://financextra.com
It'll really help you!
We will ship it worldwide withi
On Tue, 9 Jan 2007, Vaclav Barta wrote:
> Both with and without the patch, I get sd[ab] with write protect on;
> ``blockdev --rereadpt /dev/sda'' succeeds (or at least doesn't
> complain) but ``mount -t vfat /dev/sda1 /mnt/stick'' still says
>
> mount: block device /dev/sda1 is write-protected,
On Sunday 07 January 2007 18:39, Alan Stern wrote:
> So perhaps you can put sd_mod back where it belongs and plug the device in
I actually had to put SCSI disk support back into kernel - I couldn't
get /dev/sd[ab]1? with sd_mod.ko at all (it probably needs some configuration
I don't have to kick
Does anybody have any ideas here - I am at my wit's end. The device
works perfectly under windows (seem computer, same USB port), but under
Linux it resets the moment you open the TTYUSB device.
If the USB device is plugged in before the computer boots into Linux,
then it usually (but not alway
Problem: Keyspan USA-49WLC driver broken in
2.6.18,4.6.19, and 2.6.20
Description: The Keyspan USB driver module
(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) that is part of
the 2.4.18,2.4.19, and 2.4.20 kernels does not work on
the Keyspan USA-49WLC (USB->4 serial port device).
Specifically, the driver
