On Wed, 31 Jan 2007, Vaclav Barta wrote:
> On Tuesday 30 January 2007 19:30, Alan Stern wrote:
> > Well, there's one more approach I can think of. Go back to the regular
> > kernel, and make sure to build sd_mod as a module. Rename or move
> > sd_mod.ko so that it can't be loaded automatically.
On Tuesday 30 January 2007 19:30, Alan Stern wrote:
> Well, there's one more approach I can think of. Go back to the regular
> kernel, and make sure to build sd_mod as a module. Rename or move
> sd_mod.ko so that it can't be loaded automatically.
>
> After plugging in the stick, run plscsi with t
On Tue, 30 Jan 2007, Vaclav Barta wrote:
> > work. The patch causes the SCSI core to send an INQUIRY command to each
> > LUN before registering any of them, which is more or less what Windows
> > does. (You might have to apply the patch by hand, like the other one, but
> > it shouldn't be too ba
On Monday 29 January 2007 23:05, Alan Stern wrote:
> Here's a completely different patch. You shouldn't need the previous one
OK, I've reverted to standard unusual_devs.h, but I still have the patched
scsiglue.c - is that OK?
> along with this. This one is completely experimental and unlikely e
On Mon, 29 Jan 2007, Vaclav Barta wrote:
> > However, this doesn't mean the device will actually allow you to write on
> > it! The only way to find out it to try it.
> >
> > You will still need to use usbreset together with the two plscsi commands
> > and blockdev. But then you ought to be able
On Monday 29 January 2007 18:21, Alan Stern wrote:
> Well, here's one last thing you can try. The patch below will prevent
> Linux from asking the device whether it is write-protected, so there will
Well, it didn't apply (I suppose my 2.6.18 sources are too old by now), but
I've inserted it manua
On Sat, 27 Jan 2007, Vaclav Barta wrote:
> On Saturday 27 January 2007 02:27, Alan Stern wrote:
> > Let's see the usbmon log for the entire sequence, starting with plugging
> > in the stick and including the usbreset, plscsi, and blkdev commands.
> OK, for the first sequence (insert the stick, the
On Saturday 27 January 2007 02:27, Alan Stern wrote:
> Let's see the usbmon log for the entire sequence, starting with plugging
> in the stick and including the usbreset, plscsi, and blkdev commands.
OK, for the first sequence (insert the stick, then
./usbreset /proc/bus/usb/001/002
On Fri, 26 Jan 2007, Vaclav Barta wrote:
> I had my laptop repaired, but I'd be very surprised if they changed anything
> USB-related while replacing display (if in fact they've changed anything at
> all - the longer I look at it, the graver my doubts)... Anyway, with sg
> loaded, the commands
On Thursday 25 January 2007 21:01, Alan Stern wrote:
> On Thu, 25 Jan 2007, Vaclav Barta wrote:
> > On Monday 15 January 2007 16:36, Alan Stern wrote:
> > > Here's another approach to try. Get hold of the "usbreset" program,
> > Doesn't really work:
> > # ./usbreset /proc/bus/usb/001/002
> > Reset
On Thu, 25 Jan 2007, Vaclav Barta wrote:
> On Monday 15 January 2007 16:36, Alan Stern wrote:
> > Here's another approach to try. Get hold of the "usbreset" program, which
> > I posted here:
> >
> > http://marc.theaimsgroup.com/?l=linux-usb-users&m=116827193506484&w=2
> >
> > After plugging in yo
On Monday 15 January 2007 16:36, Alan Stern wrote:
> Here's another approach to try. Get hold of the "usbreset" program, which
> I posted here:
>
> http://marc.theaimsgroup.com/?l=linux-usb-users&m=116827193506484&w=2
>
> After plugging in your device, when the usual probing fails, do this:
> Firs
On Wed, 10 Jan 2007, Vaclav Barta wrote:
> On Tuesday 09 January 2007 21:27, Alan Stern wrote:
> > On Tue, 9 Jan 2007, Vaclav Barta wrote:
> > > mount: block device /dev/sda1 is write-protected, mounting read-only
> > That's better than before. As I recall, you couldn't even read the
> > partitio
On Tuesday 09 January 2007 21:27, Alan Stern wrote:
> On Tue, 9 Jan 2007, Vaclav Barta wrote:
> > mount: block device /dev/sda1 is write-protected, mounting read-only
> That's better than before. As I recall, you couldn't even read the
> partition table for /dev/sda, let alone try to mount /dev/sd
On Tue, 9 Jan 2007, Vaclav Barta wrote:
> Both with and without the patch, I get sd[ab] with write protect on;
> ``blockdev --rereadpt /dev/sda'' succeeds (or at least doesn't
> complain) but ``mount -t vfat /dev/sda1 /mnt/stick'' still says
>
> mount: block device /dev/sda1 is write-protected,
On Sunday 07 January 2007 18:39, Alan Stern wrote:
> So perhaps you can put sd_mod back where it belongs and plug the device in
I actually had to put SCSI disk support back into kernel - I couldn't
get /dev/sd[ab]1? with sd_mod.ko at all (it probably needs some configuration
I don't have to kick
On Sun, 7 Jan 2007, Vaclav Barta wrote:
> On Saturday 06 January 2007 23:15, Alan Stern wrote:
> > On Sat, 6 Jan 2007, Vaclav Barta wrote:
> > > Looks like the command succeeds when it's repeated persistently enough...
> > Or maybe it wants to see some of those commands for /dev/sg1 before it
> >
On Saturday 06 January 2007 23:15, Alan Stern wrote:
> On Sat, 6 Jan 2007, Vaclav Barta wrote:
> > Looks like the command succeeds when it's repeated persistently enough...
> Or maybe it wants to see some of those commands for /dev/sg1 before it
> will let /dev/sg0 work. Try doing something just a
On Sat, 6 Jan 2007, Vaclav Barta wrote:
> On Thursday 04 January 2007 22:08, Alan Stern wrote:
> > On Wed, 3 Jan 2007, Vaclav Barta wrote:
> > All right. Here's a list of plscsi commands that are exactly equivalent
> OK. Using both your patches, I've renamed sd_mod.ko, inserted the stick and
> r
On Thursday 04 January 2007 22:08, Alan Stern wrote:
> On Wed, 3 Jan 2007, Vaclav Barta wrote:
> All right. Here's a list of plscsi commands that are exactly equivalent
OK. Using both your patches, I've renamed sd_mod.ko, inserted the stick and
ran modprobe sg . Then, the plscsi commands work as
On Thursday 04 January 2007 22:08, Alan Stern wrote:
> However there is one significant difference between Linux and Windows
> which may go some way toward explaining the write-protect values. To make
> Linux work like Windows in this regard, apply the patch below. You should
OK, that patch certa
On Wed, 3 Jan 2007, Vaclav Barta wrote:
> On Tuesday 02 January 2007 23:21, Alan Stern wrote:
> > Comparing the logs again, I see that Windows uses a 512-byte read to load
> > the partition sector whereas Linux uses a 4096-byte read. It's reasonable
> > to assume the device likes one and doesn't
On Tuesday 02 January 2007 23:21, Alan Stern wrote:
> Comparing the logs again, I see that Windows uses a 512-byte read to load
> the partition sector whereas Linux uses a 4096-byte read. It's reasonable
> to assume the device likes one and doesn't like the other.
>
> Unfortunately there's no way
On Tue, 26 Dec 2006, Vaclav Barta wrote:
> Hi,
>
> sorry for the late answer - festivities proved unavoidable... :-)
Likewise.
> > > > > So, sdb looks big enough and sdb1 can be mounted, but just read-only.
> > > > > Documentation mentions a "read-only switch" but the hardware doesn't
> > > > >
Hi,
sorry for the late answer - festivities proved unavoidable... :-)
On Monday 18 December 2006 20:42, Alan Stern wrote:
> On Mon, 18 Dec 2006, Vaclav Barta wrote:
> > On Friday 15 December 2006 20:31, Alan Stern wrote:
> > > On Fri, 15 Dec 2006, Vaclav Barta wrote:
> > > > So, sdb looks big eno
On Mon, 18 Dec 2006, Vaclav Barta wrote:
> On Friday 15 December 2006 20:31, Alan Stern wrote:
> > On Fri, 15 Dec 2006, Vaclav Barta wrote:
> > > So, sdb looks big enough and sdb1 can be mounted, but just read-only.
> > > Documentation mentions a "read-only switch" but the hardware doesn't have
>
On Friday 15 December 2006 20:31, Alan Stern wrote:
> On Fri, 15 Dec 2006, Vaclav Barta wrote:
> > So, sdb looks big enough and sdb1 can be mounted, but just read-only.
> > Documentation mentions a "read-only switch" but the hardware doesn't have
> > any. :-( How do I remove (or ignore) the write p
On Fri, 15 Dec 2006, Vaclav Barta wrote:
> > Do you remember where you read this?
> Sorry, no. Some kind of online discussion or howto about flash drives on
> Linux
> I read a few months ago... It said that since flash memory has a limited
> number of writes, they should be mounted read-only by
On Thursday 14 December 2006 21:32, Alan Stern wrote:
> On Thu, 14 Dec 2006, Vaclav Barta wrote:
> > Dec 14 18:58:05 quanxi kernel: SCSI device sda: 982016 512-byte hdwr
> > sectors (503 MB)
> > Dec 14 18:58:05 quanxi kernel: sda: Write Protect is off
> Obviously this is the LUN you want to use, wi
On Thu, 14 Dec 2006, Vaclav Barta wrote:
> On Wednesday 13 December 2006 21:29, Alan Stern wrote:
> > In fact the stick has 2 LUNs, but your usbmon log shows that Linux is
> > looking at only the first one. Probably you don't have
> > CONFIG_SCSI_MULTI_LUN set in your kernel. My guess is that th
On Wednesday 13 December 2006 21:29, Alan Stern wrote:
> In fact the stick has 2 LUNs, but your usbmon log shows that Linux is
> looking at only the first one. Probably you don't have
> CONFIG_SCSI_MULTI_LUN set in your kernel. My guess is that the first LUN
Indeed I didn't. I've turned it on and
On Wed, 13 Dec 2006, Vaclav Barta wrote:
> On Wednesday 13 December 2006 16:02, Alan Stern wrote:
> > > Dec 12 19:04:47 quanxi kernel: SCSI device sda: 982016 512-byte hdwr
> > > sectors (503 MB)
> > > Dec 12 19:04:47 quanxi kernel: sda: Write Protect is off
> > > Dec 12 19:04:47 quanxi kernel: s
On Wednesday 13 December 2006 16:02, Alan Stern wrote:
> > Dec 12 19:04:47 quanxi kernel: SCSI device sda: 982016 512-byte hdwr
> > sectors (503 MB)
> > Dec 12 19:04:47 quanxi kernel: sda: Write Protect is off
> > Dec 12 19:04:47 quanxi kernel: sda:<6>sd 1:0:0:0: SCSI error: return
> > code = 0x08
On Tue, 12 Dec 2006, Vaclav Barta wrote:
> Hi,
>
> I have a USB 2.0 flash drive called "next alien" ("developed by Emgeton,
> assembled in Taiwan, copyright Bell technology" - not very high-end, but it
> looks funny :-) ) and identifying itself as "Nu Drive" (see the log below)
> which I'd lik
> > I have a USB 2.0 flash drive called "next alien" ("developed by
...
> > Not surprisingly, ``mount -t vfat /dev/sda /mnt/stick'' fails with
> > mount: /dev/sda: can't read superblock
> I always specify the partition, as in "mount /dev/sda1 /mnt/stick".
> As an experiment, I tried "mount -t vfat
On Tue, 12 Dec 2006 19:21:00 +0100
Vaclav Barta wrote:
> Hi,
>
> I have a USB 2.0 flash drive called "next alien" ("developed by
> Emgeton, assembled in Taiwan, copyright Bell technology" - not very
> high-end, but it looks funny :-) ) and identifying itself as "Nu
> Drive" (see the log below) wh
Hi,
I have a USB 2.0 flash drive called "next alien" ("developed by Emgeton,
assembled in Taiwan, copyright Bell technology" - not very high-end, but it
looks funny :-) ) and identifying itself as "Nu Drive" (see the log below)
which I'd like to get working with Linux. Right now, I'm running Ge
37 matches
Mail list logo
