Hi,
you can get luvcview here:
http://mxhaard.free.fr/spca50x/Investigation/uvc/luvcview-20070512.tar.gz
maybe you should load the usbcore module with:
sudo modprobe usbcore
Good luck!
Regards,
Thomas
___
Linux-uvc-devel mailing list
Linux-uvc-deve
On Sat, Aug 25, 2007 at 07:53:22PM +0200, Mickael Drean wrote:
> my lsmod | grep video give this :
>
> as you can see, i have no usbcore module.. I don't know if it 's normal or
> not.
It's possible that you have got it, but you're filtering it out with your
grep. Try doing "lsmod | grep core" an
Hello all,
I do not know what i've done but now it works with luvcview (I already
had the last version)
With kopete it's not working yet... I may need an updated version of it.
Thanks all for your help
Mickaël
2007/8/26, Alex Pounds <[EMAIL PROTECTED]>:
>
> On Sat, Aug 25, 2007 at 07:53
Hi,
I have this version:
http://www.muizenshop.nl/layout/media/1201-1400/1306_1_image.jpg
and it works just fine, though it`s from early 2006.
cu romal
Laurent Pinchart schrieb:
>
> The best Logitech buy today is the Quickcam Pro for Notebook, 2007 edition.
> It
> looks like this
>
> htt
Hello everybody.
I received no answers to my recent call for testers for the suspend/resume
patch. This either means nobody tried it, or it worked flawlessly for
everybody.
The patch is now in SVN. If you haven't tried it before, here's the time to
check it out and complain about issues.
Best
On Saturday 25 August 2007, Calad Sigilon wrote:
> Patch with what?
There was a patch floating around.
> I downloaded and compiled the latest SVN build, and that didn't work.
I don't know if Kopete supports YUV. You'll have to investigate. Check the
Kopete sources, and raise the driver trace le
On Sunday 26 August 2007, Mickael Drean wrote:
> Hello all,
>
> I do not know what i've done but now it works with luvcview (I already
> had the last version)
>
>
> With kopete it's not working yet... I may need an updated version of it.
As Thomas reported, you might need the latest SVN build
On Sunday 26 August 2007, Robert M. Albrecht wrote:
> Hi,
>
> I have this version:
>
> http://www.muizenshop.nl/layout/media/1201-1400/1306_1_image.jpg
>
> and it works just fine, though it`s from early 2006.
That one is buggy. It works for some people and doesn't for others. It's a
decent webcam
Hi,
>> Patch with what?
>
> There was a patch floating around.
>
>> I downloaded and compiled the latest SVN build, and that didn't work.
>
> I don't know if Kopete supports YUV. You'll have to investigate. Check the
> Kopete sources, and raise the driver trace level to get more information in
Laurent Pinchart schrieb:
> Hello everybody.
>
> I received no answers to my recent call for testers for the suspend/resume
> patch. This either means nobody tried it, or it worked flawlessly for
> everybody.
>
> The patch is now in SVN. If you haven't tried it before, here's the time to
> che
Hi,
I have install the UVC driver and I try to use it with guvcview. But when I
run guvcview I get the following error.
[EMAIL PROTECTED] UVC]# guvcview
resolution: 320 x 240
windowsize: 700 x 420
mode: jpg
fps: 25
bpp: 0
hwaccel: 1
grabmethod: 1
guvcview version 0.1
Video driver: x11
A window ma
Hi,
> I do not have /dev/video or /dev/video0 device node. Does the driver
> make this nodes when it is installed, or do I have to make this nodes by
> myself? I'm realy new, so any help is welcome.
Did you modprobe the driver? An what is the modell of your webcam?
You might post lsusb and modpr
12 matches
Mail list logo
