This fix is specific to ath10K driver + 10.x firmware combinations. This has been tested extensively, didn't observe the mentioned issue.
Thanks, Senthil J -----Original Message----- From: Ben Greear [mailto:gree...@candelatech.com] Sent: Thursday, February 19, 2015 1:53 AM To: Salakava Jegadeesan, Senthil Cc: ath...@lists.infradead.org; linux-wireless@vger.kernel.org Subject: Re: [PATCH v2] ath10k: Increase AST table SKID length limit Have you tried testing this with 30+ stations associated and streaming data, and with other traffic on nearby channels (say, channel 1 and 6)? We see bad performance drop-off when we set number-of-peers above 100 (with CT firmware). My kernel will set AST skid limit to number-of-peers + number-of-vdevs. Performance is best at 32 peers or less (so skid is about 40). I am wondering if the root cause is firmware/hardware walking the full skid-length for pkts from un-associated peers on same (or neighbouring) channels, or maybe unlucky hash distribution in existing peers? Thanks, Ben On 02/13/2015 07:36 AM, SenthilKumar Jegadeesan wrote: > The current SKID length configuration causes firmware to reject peer > creation for not able to allocate AST entries for peers. This issue is > observed when least significant 3 bytes are used ramdomly to create > client MAC addresses. > > AST table SKID length configuration is increased to maximum value to > fix this issue. > > Signed-off-by: SenthilKumar Jegadeesan <sjega...@qti.qualcomm.com> > --- > drivers/net/wireless/ath/ath10k/hw.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/ath/ath10k/hw.h > b/drivers/net/wireless/ath/ath10k/hw.h > index 460771f..7f04645 100644 > --- a/drivers/net/wireless/ath/ath10k/hw.h > +++ b/drivers/net/wireless/ath/ath10k/hw.h > @@ -223,7 +223,7 @@ struct ath10k_pktlog_hdr { > #define TARGET_10X_NUM_WDS_ENTRIES 32 > #define TARGET_10X_DMA_BURST_SIZE 0 > #define TARGET_10X_MAC_AGGR_DELIM 0 > -#define TARGET_10X_AST_SKID_LIMIT 16 > +#define TARGET_10X_AST_SKID_LIMIT 128 > #define TARGET_10X_NUM_STATIONS 128 > #define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \ > (TARGET_10X_NUM_VDEVS)) > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-wireless" in the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
