In order to add per-vif TX power capability cap per-packet TX power to vif
configured power if the latter is lower than per-rate TX power and mac80211
per-frame power. Use vif TX power if TPC has been disabled for current
interface
Signed-off-by: Lorenzo Bianconi <lorenzo.biancon...@gmail.com>
---
drivers/net/wireless/ath/ath9k/xmit.c | 42 +++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c
b/drivers/net/wireless/ath/ath9k/xmit.c
index 1b8e75c..0acd079 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1103,14 +1103,28 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc,
struct ath_buf *bf,
struct sk_buff *skb;
struct ath_frame_info *fi;
struct ieee80211_tx_info *info;
+ struct ieee80211_vif *vif;
struct ath_hw *ah = sc->sc_ah;
if (sc->tx99_state || !ah->tpc_enabled)
return MAX_RATE_POWER;
skb = bf->bf_mpdu;
- fi = get_frame_info(skb);
info = IEEE80211_SKB_CB(skb);
+ vif = info->control.vif;
+
+ if (!vif) {
+ max_power = sc->cur_chan->cur_txpower;
+ goto out;
+ }
+
+ if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) {
+ max_power = min_t(u8, sc->cur_chan->cur_txpower,
+ 2 * vif->bss_conf.txpower);
+ goto out;
+ }
+
+ fi = get_frame_info(skb);
if (!AR_SREV_9300_20_OR_LATER(ah)) {
int txpower = fi->tx_power;
@@ -1147,25 +1161,25 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc,
struct ath_buf *bf,
txpower -= 2;
txpower = max(txpower, 0);
- max_power = min_t(u8, ah->tx_power[rateidx], txpower);
-
- /* XXX: clamp minimum TX power at 1 for AR9160 since if
- * max_power is set to 0, frames are transmitted at max
- * TX power
- */
- if (!max_power && !AR_SREV_9280_20_OR_LATER(ah))
- max_power = 1;
+ max_power = min_t(u8, ah->tx_power[rateidx],
+ 2 * vif->bss_conf.txpower);
+ max_power = min_t(u8, max_power, txpower);
} else if (!bf->bf_state.bfs_paprd) {
if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC))
- max_power = min(ah->tx_power_stbc[rateidx],
- fi->tx_power);
+ max_power = min_t(u8, ah->tx_power_stbc[rateidx],
+ 2 * vif->bss_conf.txpower);
else
- max_power = min(ah->tx_power[rateidx], fi->tx_power);
+ max_power = min_t(u8, ah->tx_power[rateidx],
+ 2 * vif->bss_conf.txpower);
+ max_power = min(max_power, fi->tx_power);
} else {
max_power = ah->paprd_training_power;
}
-
- return max_power;
+out:
+ /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power
+ * is set to 0, frames are transmitted at max TX power
+ */
+ return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power;
}
static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
