Resent due to subject error. Apologies, Hante :)
Hi Folks,
9fe929aaace6 brcmfmac: add firmware feature detection for gscan feature
Completely breaks 43430a1 support.
This was tested on top of my last patchset - but the same occurs on top
of vanilla 4.13-rc1
[ 15.703014] [1 ] core 0x800:49
On 17/07/17 18:50, Ian Molton wrote:
> Resent due to subject error. Apologies, Hante :)
>
> Hi Folks,
>
> 9fe929aaace6 brcmfmac: add firmware feature detection for gscan feature
>
> Completely breaks 43430a1 support.
Digging a bit deeper, this would *appear* to be one of a couple of
possibilit
On 17-07-17 20:31, Ian Molton wrote:
> On 17/07/17 18:50, Ian Molton wrote:
>> Resent due to subject error. Apologies, Hante :)
>>
>> Hi Folks,
>>
>> 9fe929aaace6 brcmfmac: add firmware feature detection for gscan feature
>>
>> Completely breaks 43430a1 support.
>
> Digging a bit deeper, this wou
On 17/07/17 20:53, Arend van Spriel wrote:
>> 2) The firmware is failing when asked to handle the new requiests, and
>>is going to la-la land.
> taken a wrong turn straight into la-la land.
Doh!
>> I have version wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327)
>> FWID 01-4527cfab
> Not
On 17-07-17 22:13, Ian Molton wrote:
> On 17/07/17 20:53, Arend van Spriel wrote:
>>> 2) The firmware is failing when asked to handle the new requiests, and
>>>is going to la-la land.
>> taken a wrong turn straight into la-la land.
>
> Doh!
>
>>> I have version wl0: Aug 29 2016 20:48:16 ver
On 17/07/17 21:36, Arend van Spriel wrote:
> In /brcmfmac/*/forensics, but you have to load the
> driver with modules parameter 'ignore_probe_fail=1' to avoid the driver
> remove tearing down all debugfs stuff.
modinfo shows:
parm: txglomsz:Maximum tx packet chain size [SDIO] (int)
par
On 17-07-17 22:41, Ian Molton wrote:
> On 17/07/17 21:36, Arend van Spriel wrote:
>
>> In /brcmfmac/*/forensics, but you have to load the
>> driver with modules parameter 'ignore_probe_fail=1' to avoid the driver
>> remove tearing down all debugfs stuff.
>
> modinfo shows:
>
> parm:
On 17/07/17 22:31, Arend van Spriel wrote:
>
>
> On 17-07-17 22:41, Ian Molton wrote:
>> On 17/07/17 21:36, Arend van Spriel wrote:
>>
>>> In /brcmfmac/*/forensics, but you have to load the
>>> driver with modules parameter 'ignore_probe_fail=1' to avoid the driver
>>> remove tearing down all deb
Hi Arend,
This is all there is in the forensics file, hope its of some use.
# cat /sys/kernel/debug/brcmfmac/mmc1\:0001\:1/forensics
Enter
hndarm_armr addr: 0x18003000, cr4_idx: 0
00.000
RTE (SDIO-CDC) 7.45.41.26 (r640327) on BCM43430 r1 @ 37.4/81.0/81.0MHz
00.001 sdpcmdcdc0: Broadcom SDP
On 18-07-17 00:10, Ian Molton wrote:
> Hi Arend,
>
> This is all there is in the forensics file, hope its of some use.
>
> # cat /sys/kernel/debug/brcmfmac/mmc1\:0001\:1/forensics
> Enter
> hndarm_armr addr: 0x18003000, cr4_idx: 0
> 00.000
> RTE (SDIO-CDC) 7.45.41.26 (r640327) on BCM43430 r1
10 matches
Mail list logo