Re: [PATCH v2 2/3] ath10k: Configure rxnss_override for 10.4 firmware.

2017-06-19 Thread Sven Eckelmann
On Freitag, 16. Juni 2017 08:50:13 CEST Kalle Valo wrote: > We have hw_params for stuff like this so I changed this and the > following patch to use that. Please review: Looks good. Thanks for adjusting the patches. Kind regards, Sven signature.asc Description: This is a digitally

Re: [PATCH v2 2/3] ath10k: Configure rxnss_override for 10.4 firmware.

2017-06-16 Thread Kalle Valo
Sven Eckelmann writes: > From: Ben Greear > > QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. > > First, report this to user-space by setting the max-tx-speed > and max-rx-speed vht capabilities. > > Second, if the peer

Re: [v2,2/3] ath10k: Configure rxnss_override for 10.4 firmware.

2017-06-12 Thread Kalle Valo
Sven Eckelmann wrote: > QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. > > First, report this to user-space by setting the max-tx-speed > and max-rx-speed vht capabilities. > > Second, if the peer rx-speed is configured, and if we > are in 160 or

[PATCH v2 2/3] ath10k: Configure rxnss_override for 10.4 firmware.

2017-06-09 Thread Sven Eckelmann
From: Ben Greear QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. First, report this to user-space by setting the max-tx-speed and max-rx-speed vht capabilities. Second, if the peer rx-speed is configured, and if we are in 160 or 80+80 mode, and the peer

Re: ath10k: Configure rxnss_override for 10.4 firmware.

2017-06-09 Thread Sven Eckelmann
On Mittwoch, 15. Februar 2017 01:26:58 CEST Kalle Valo wrote: > Ben Greear wrote: > > From: Ben Greear > > > > QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. [] > Does not apply: > > error: patch failed:

Re: ath10k: Configure rxnss_override for 10.4 firmware.

2017-02-15 Thread Kalle Valo
Ben Greear wrote: > From: Ben Greear > > QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. > > First, report this to user-space by setting the max-tx-speed > and max-rx-speed vht capabilities. > > Second, if the peer rx-speed is

[PATCH] ath10k: Configure rxnss_override for 10.4 firmware.

2017-02-10 Thread greearb
From: Ben Greear QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. First, report this to user-space by setting the max-tx-speed and max-rx-speed vht capabilities. Second, if the peer rx-speed is configured, and if we are in 160 or 80+80 mode, and the peer