Hi again,
currently such magic is unavailable, I have some internal demo, which scan
for a coordinator and connect to it by pressing on-board button. But it's a
raw demo-draft only. This moment I have no free time to finish this tool :(
Thank you,
Alexander
2011/7/6 voice
> **
> Hi Alexander,
Hi Alexander,
With your hint, it works my board.
Thank you very much!
BTW, is there any good method to configure the zigbee?
For my instance, I use one script to combine the command together as
following:
iz add wpan-phy0
ip link set wpan0 address
ifconfig wpan0 up
iz scan ...
Hi,
thank you for the interest to this project!
The 'channels' argument to iz command is a bit mask (not a number).
Currently supported the following mask: 0x7fff800 (channels from 12 to 31).
So below is my output:
root@at91sam9g20ek:~/bin# iz scan wpan0 active 800 1
Found beacon:
Shor
Hi All,
I use the Linux kernel which include zigbee stack from Linux-zigbee project.
Using the 88RF231 hardware with at91sam9g20ek board.
It can configure the device successfully and send data between two devices.
But, If I use the iz scan command it will git the following error
informatio
Module Size Used by
serial 10640 0
mac802154 25991 1 serial
ieee802154 19792 1 mac802154
crc_ccitt 1443 1 mac802154
[ 445.910047] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB1
mac@mac:~/user2/linux-z
On 7/5/11, Ryan MacArthur wrote:
> after getting the newest userland git, I did ./configure
> --enable-kernel-compat
>
> and ran izattach and still get the error here:
I've reread your mails. You don't need fake* modules.\
Instead please use "serial" module
>
> if (ret < 0 && errno == E
after getting the newest userland git, I did ./configure --enable-kernel-compat
and ran izattach and still get the error here:
if (ret < 0 && errno == EINVAL) {
printf("\nOLD2\n");
arg = N_IEEE802154_VERY_OLD;
ret = ioctl(fd, TIOCSETD, &arg)
This patch provides base support for transmission of IPv6 packets as
well as the formation of IPv6 link-local addresses and statelessly
autoconfigured addresses on top of IEEE 802.15.4 networks.
For more information please look at the RFC4944 "Compression Format
for IPv6 Datagrams in Low Power and
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- Miguel
Miguel Caudevilla
--
Germany
Confirm that you know Miguel Caudevilla
https://www.linkedin.com/e/29qgyc-gpqqqbcn-59/isd/3432315015/p7aQ4xIL/
--
(c) 2011, LinkedIn Corporation--
