Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-04-22 Thread K F
Hello Alan, Thanks for the (continuous) support. :) I have this image installed on my Beaglebone: http://elinux.org/BeagleBoardUbuntu#Quantal_12.10_armhf [..with the -bone_dtb tag (i.e. "testing v3.8.x based kernel")] I also grabbed this kernel: http://www.eewiki.net/display/linuxonarm/BeagleBo

Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-04-19 Thread Alan Ott
I've never seen that before. The beaglebone kernel[1] has been updated so that mrf24j40 on beaglebone should work out of the box when connected to SPI1 (no more patches required). Are you running that, or are you running something older, with your own patches applied? Are you using ubuntu? Are y

Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-04-18 Thread K F
Sorry, last part should read: root@arm:/home/ubuntu# sudo iz -d add wpan-phy1 DBG<1>: Clearing cache 0x15218 ... DBG<1>: Picking up answer for cache 0x15218 ... DBG<1>: Added 0x16360 to cache 0x15218 . DBG<1>: Added 0x162e8 to cache 0x15218 . DBG<1>: Added 0x16440 to cache 0x15218 . DBG<1>: Added

Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-04-18 Thread K F
Hi all, Just got down to trying this again. Thanks to Joao for spotting this patch issue - I recompiled to get our spi pin back! :) Following the instructions, I run the echo command to load the DT for the MRF24J40. Had to enable the root account in Ubuntu, since simply doing "sudo echo ..." was

Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-03-26 Thread João Paulo Bodanese
Hi Alan, There is a patch after March, 6th (commit 9bf23ea262), that removes the symbol spi1_pins_s0 from am335x-bone-common.dtsi The patch name is: 0115-am335x-bone-common-Remove-SPI-unused-pinmux-config.patch Now the command is working, and I can see the mrf24j40 print debug. One more step :)

Re: [Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-03-25 Thread Alan Ott
On 03/25/2013 04:48 AM, João Paulo Bodanese wrote: > Hi Alan, > > I am starting this new thread to do not disturb that one from the > compilation error. > > I'm following the steps you told me to load the MRF24J40. > > After board power up, I am getting problem below when running the > command: ech

[Linux-zigbee-devel] Load mrf24j40 on beaglebone

2013-03-25 Thread João Paulo Bodanese
Hi Alan, I am starting this new thread to do not disturb that one from the compilation error. I'm following the steps you told me to load the MRF24J40. After board power up, I am getting problem below when running the command: echo BB-BONE-MRF24J40 >/sys/devices/bone_capemgr.7/slots [ 30.1434