On Sat, 27 Sep 2003 21:10:58 -0300, Andre Dias wrote:
Hi there,
If the K7SEM is working, then could someone please update the K7SEM howto with the correct information, as by following the existing howto, my K7SEM freezes at Setting MTTR...UC.
Best Regards
--
Alex Scarbro, [EMAIL
On 09/27/2003 07:32:57 AM, Kevin O'Connor wrote:
Hi,
I have a motherboard that I would like to get linuxbios working on.
Unfortunately, it has a TSOP flash part that is soldered directly
onto
it.
I am concerned that if I write to the flash I may turn the unit into
a
brick.
Has anyone had any
On Sun, 28 Sep 2003, Alex Scarbro wrote:
If the K7SEM is working, then could someone please update the K7SEM
howto with the correct information, as by following the existing howto,
my K7SEM freezes at Setting MTTR...UC.
It's not working. My next step after EPIA is the K7SEM, since it
At 17:48 28/09/2003, Andrew Ip wrote:
Hi,
Would someone help me to fill these information in?
Board Problem Solution
K7SEM ECC code problemAdd an option to disable ecc support
EPIA??
EPIA-M DDR setup Add SPD detection
ron minnich [EMAIL PROTECTED] writes:
On Sat, 27 Sep 2003, Stefan Reinauer wrote:
This did help indeed. Is there any good reason not to reverse the
probing per default? Ron, Eric?
I'm going to defer to Eric on this, as I am not sure.
I'm running slow in replying. But I don't see why
On 28 Sep 2003, Eric W. Biederman wrote:
Mostly I suspect this is a matter of keeping the irq tables
in sync, or something similar where hard codes don't match the dynamic
assignments. And if that is the case we need to dig and do a good fix
instead of papering over the problem.
the PIRQ
6 matches
Mail list logo