fine missed 0x.
>
> Regards
>
> YH
>
> -邮件原件-
> 发件人: Steven James [mailto:[EMAIL PROTECTED]
> 发送时间: 2004年5月27日 15:56
> 收件人: YhLu
> 抄送: ron minnich; Jay Miller; [EMAIL PROTECTED]; LinuxBIOS
> 主题: Re: 答复: 答复: 答复: Getting Started with freebios2!
>
> Greetings
James [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月27日 15:56
收件人: YhLu
抄送: ron minnich; Jay Miller; [EMAIL PROTECTED]; LinuxBIOS
主题: Re: 答复: 答复: 答复: Getting Started with freebios2!
Greetings,
I'm finally getting dug out after being snowed under :-)
The spec is probably part of:
http://www.usb.org/
Steven James <[EMAIL PROTECTED]> writes:
> For the serial, UHCI and OHCI will be good. EHCI can likely be ignored for
> the BIOS since fast devices are required to fall back and EHCI always has
> one of UHCI or OHCI to handle low speed USB.
Actually not. At least not for serial before the memory
004年5月27日 14:23
> 收件人: YhLu
> 抄送: Jay Miller; [EMAIL PROTECTED]; LinuxBIOS
> 主题: Re: 答复: 答复: Getting Started with freebios2!
>
> On Thu, 27 May 2004, YhLu wrote:
>
> > Usb to serial ???
>
> yes, it's now needed :-(
>
> ron
> __
On Thu, 2004-05-27 at 15:14, ron minnich wrote:
> now we need usb output. The HP node we got has no serial port!
>
> ouch!
>
I thought we don;t care about those HP nodes due to it
"management" processor".
Ollie
> ron
>
> ___
> Linuxbios mailing list
: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月27日 14:23
收件人: YhLu
抄送: Jay Miller; [EMAIL PROTECTED]; LinuxBIOS
主题: Re: 答复: 答复: Getting Started with freebios2!
On Thu, 27 May 2004, YhLu wrote:
> Usb to serial ???
yes, it's now needed
* ron minnich <[EMAIL PROTECTED]> [040527 23:14]:
> now we need usb output. The HP node we got has no serial port!
No JTAG either? I'd assume serial-via-usb console needs a lot more
hardware initialized than a simple serial port before one can see
anything..
On Thu, 27 May 2004, YhLu wrote:
> Usb to serial ???
yes, it's now needed :-(
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
now we need usb output. The HP node we got has no serial port!
ouch!
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
Usb to serial ???
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月27日 14:14
收件人: YhLu
抄送: Jay Miller; [EMAIL PROTECTED]; LinuxBIOS
主题: Re: 答复: Getting Started with freebios2!
now we need usb output. The HP node we got has no serial port!
ouch!
ron
送时间: 2004年5月27日 11:57
收件人: YhLu; [EMAIL PROTECTED]
抄送: LinuxBIOS
主题: RE: Getting Started with freebios2!
I think that I've been lucky using a stock RH9 distro. I'm going to make
sure I've got the latest binutils, etc... and retry.
By the way, what is the status on USB support? I
ROTECTED]
Sent: Thursday, May 27, 2004 3:10 PM
To: [EMAIL PROTECTED]; Jay Miller
Cc: LinuxBIOS
Subject: çå: Getting Started with freebios2!
Did you use
export LANG=en_US
before make bin/tg3--filo.zelf?
Or I could send one tg3_filo.zelf to you?
Regards
YH
-éäåä-
åää: [EMAIL PROTECTED] [mailto:[
Did you use
export LANG=en_US
before make bin/tg3--filo.zelf?
Or I could send one tg3_filo.zelf to you?
Regards
YH
-邮件原件-
发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月27日 11:48
收件人: Jay Miller
抄送: Eric W. Biederman; LinuxBIOS
主题: Re: Getting Started with freebios2
"Jay Miller" <[EMAIL PROTECTED]> writes:
> That's why I thought that elfboot couldn't read .zelf, because the image
> sizes are incorrect.Actual image size for the tg3--filo.zelf image
> is 43,153 bytes, which is smaller than the file.elf image 43,472 bytes.
> But when I make a linuxbios.rom w
d,
elfboot generates the output I sent you.
-J
-Original Message-
From: Eric W. Biederman [mailto:[EMAIL PROTECTED] On Behalf Of Eric W.
Biederman
Sent: Thursday, May 27, 2004 10:25 AM
To: Jay Miller
Cc: LinuxBIOS
Subject: Re: Getting Started with freebios2!
Please CC the list on questions
Please CC the list on questions like this.
"Jay Miller" <[EMAIL PROTECTED]> writes:
> Hi Eric,
>
> Perhaps you can help me, seeing that you wrote elfboot. This is the
> output that I get when I use a .zelf image:
>
> Welcome to elfboot, the open sourced starter.
> January 2002, Eric Bieder
"Jay Miller" <[EMAIL PROTECTED]> writes:
> Disclaimer: I too am a N00B and these are my observations thus far.
> They may not be 100% correct, but these things have worked for me. I
> hope that they'll help other N00Bz get started.
Nice
> This is my latest N00B stumbling block, and unfort
I like to develop, linuxbios to my motherboards, but none of them are suported, i will
show you some lspci of them:
#1:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev 02)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 01)
00:01.1 IDE interface: S
Excellent work! This should prove helpful to those new to the project get
started. I'd like to elaborate on a few points you have made.
On Tue, 18 May 2004, Jay Miller wrote:
>
> HOW DO I FLASH A ROM?
> There is also a flash-n-burn utility in the source tree. Perhaps
> someone on the list can a
Disclaimer: I too am a N00B and these are my observations thus far.
They may not be 100% correct, but these things have worked for me. I
hope that they'll help other N00Bz get started.
WHAT IS FREEBIOS2?
Well I stumbled upon freebios2 when I couldn't find support in the
freebios tree for my Tya
20 matches
Mail list logo
