On Thu, 2005-01-20 at 09:45 -0700, Ronald G. Minnich wrote:
> I'm quite certain it is memory, this is always the scenario with this type
> of output. I may still be wrong, but I doubt it. Certain problems occur
> over and over again, and this looks to be one of them. Can you be sure
> that your
Hi Al,
Quoting Al Hooton <[EMAIL PROTECTED]>:
On Thu, 2005-01-20 at 09:45 -0700, Ronald G. Minnich wrote:
I'm quite certain it is memory, this is always the scenario with this type
of output. I may still be wrong, but I doubt it. Certain problems occur
over and over again, and this looks to be one
well, send me an lspci so i can be double sure I have these boards, and we
will take a look next week. I'm sorry to see you're having trouble.
ron
___
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxb
On Fri, 21 Jan 2005 [EMAIL PROTECTED] wrote:
> Depending on the values from the factory bios, you may need to alter the
> definitions of DIMM_PC133 and DIMM_CL2 at the top of raminit.c to get
> you going.
or fix that code so it does the right thing ...
that code is derived from my really old
On Fri, 2005-01-21 at 10:03 -0700, Ronald G. Minnich wrote:
> well, send me an lspci so i can be double sure I have these boards, and we
> will take a look next week. I'm sorry to see you're having trouble.
Thanks, Ron. I know you guys are busy, I'm not asking for a lot of help
(yet?). At thi
On Fri, 2005-01-21 at 10:11 -0800, Al Hooton wrote:
> (yet?). At this point, I'm curious as to whether this lspci output
> matches the EPIA 800 boards you have running LB in-house?
Hold off on that request. I've gotten through LB to my payload.
Mark's pointer to the defines at the top o
On Fri, 21 Jan 2005, Al Hooton wrote:
> Ron: What do you believe is involved in updating raminit.c for the
> vt8601 northbridge in order to auto-detect CL of 2 or 3? What about
> updating it to auto-detect PC100/PC133? I'm not familiar with the
> register interfaces in the vt8601, I've n
>
> basically, even on the new 8601, you can autodetect all you want but some
> settings seem to not work. Very frustrating. I'll have to look and see
> what hooks are in there, I no longer remember.
Since I'm in that code currently copying and looking for my 440bx
port. I noticed that the IO_BAS
8 matches
Mail list logo
