I Believe VIA ME6000 uses VT8235 SouthBridge.
Ming.
- Original Message -
From: "Brian G. Rhodes" <[EMAIL PROTECTED]>
To: "Leon Woestenberg" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, July 29, 2003 10:05 PM
Subject: Re: EPIA-ME6000
That looks like an EPIA M-1 compatable board to me. btw, about flash
parts, you might more easily find the sst29f040 parts. also macronix makes
compatable parts. You're lucky it's not a vt82c686b south as linuxbios
does not work very well with that chipset.
Brian G Rhodes
[EMAIL PROTECTED]
Hello Andrew,
> > I have been fiddling with etherboot 5.0.10 and freebios(v1) from CVS
today
> > on a EPIA-ME6000 platform.
> > ...
> > When booting, I merely got garbled output on the serial port.
> > I have double checked that the config file reads 115200 and tha
Hi,
> Any idea why? Broken hardware? Undocumented setups for the serial port?
Most likely undocumented setup, 'coz my code works on another custom
board with the same chipset.
-Andrew
--
Andrew Ip
Email: [EMAIL PROTECTED]
Tel:(852) 2542 2046
Fax:(852) 2542 2036
Mobile: (852) 9201 9866
Andrew Ip wrote:
Have you tried 57600? EPIA-M6000 seems to have problem to use 115200
under LinuxBIOS unless it is boot from normal bios and then reset the
system. That's why you are getting garbage.
Any idea why? Broken hardware? Undocumented setups for the serial port?
-Bari
_
Hi Leon,
> I have been fiddling with etherboot 5.0.10 and freebios(v1) from CVS today
> on a EPIA-ME6000 platform.
> This is the unit with a low speed clock (500MHz?) Eden C3 processor
> which copes with passive cooling. I think it is EPIA-M9000 alike otherwise.
> Using a
TED]
+1 612-741-1191
On Tue, 29 Jul 2003, Leon Woestenberg wrote:
> Hello,
>
> I have been fiddling with etherboot 5.0.10 and freebios(v1) from CVS today
> on a EPIA-ME6000 platform.
>
> This is the unit with a low speed clock (500MHz?) Eden C3 processor
> which copes with
On Tue, Jul 29, 2003 at 12:09:11PM +0200, Leon Woestenberg wrote:
> That only worked after I copied the BIOS into the upper half of the larger
> device (from 0x4 to 0x7). So I recon the highest address line
> is not connected on the board and so the FlashROM sees high-impedance
> on its mos
Hello,
I have been fiddling with etherboot 5.0.10 and freebios(v1) from CVS today
on a EPIA-ME6000 platform.
This is the unit with a low speed clock (500MHz?) Eden C3 processor
which copes with passive cooling. I think it is EPIA-M9000 alike otherwise.
Using a hardware flash programmer, I first
9 matches
Mail list logo
