FYI:
If you do 'cvs update -dP'. After checking out the code, they will go
away.
-d gets any new directories that have been added to the tree since you last
updated
-P prunes empty directories after the checkout completes.
This hides the problem with CVS that directories can ne
the best way to do a new motherboard is find one that is almost the same
in the mainboard tree, and make a copy of that directory, and tailor it as
needed.
So, for example, if you have a motherboard that is a lot like
src/mainboard/digitallogic/smartcore-p5,
and it is called the Noblet Fineboa
the empty directories are an artifact of CVS. Sorry, I can't fix it just
now.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
Hello again,
So I ordered 6 of the flash chips and got a PLCC removal tool. I'm
ready to start getting this working on my machine. I am still unclear
as to the steps to proceed in order to do that. I have looked at the
tiara source, there seems to be quite a bit there so that is promising.
Whe
On Thu, 28 Nov 2002, Nathanael Noblet wrote:
> I really don't think it is anything but the BIOS chip. It is in a
> square "socket" ( I use the term loosely) with 9 pins on the top and
> bottom, 7 on the left and right.
>
> Oh and what is a PLCC flash device?? I'll google but perhaps you can
>
Greetings,
Yep, that's a standard PLCC in a socket. Just as a quick tip, they are
often quite tight. I like to extract and replace 4-5 times with power off
on a new board just to 'break it in' so things go easy when hot swapping
later.
One further caution, in spite of being keyed, it is fairly ea
On Fri, 2002-11-29 at 14:41, Nathanael Noblet wrote:
>
>
> That is the device. It says on it:
> AWARD
> copy 1998
> PCI/PNP 586
> 230085332
>
You should remove the label on the chip and you can see the real
part number of it. It has nothing with any keywords like "AWARD".
> I really don't thin
tes this E-Mail to Master Yoda )
> -Original Message-
> From: Nathanael Noblet [mailto:[EMAIL PROTECTED]]
> Sent: Friday, November 29, 2002 1:41 AM
> To: [EMAIL PROTECTED]
> Cc: Linuxbios; 'steven james'
> Subject: Re: Question regarding instructions...
>
>
On Thursday, November 28, 2002, at 11:07 PM, Gregg C Levine wrote:
Hello from Gregg C Levine
You are thinking of that square gizmo, with the blurry label on it? And
above the Disk On Chip device? It might be, I've seen AWARD BIOS units
jammed into PLCC type flash devices before, but its rather r
nobi )
(This company dedicates this E-Mail to Master Yoda )
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:linuxbios-
> [EMAIL PROTECTED]] On Behalf Of Nathanael Noblet
> Sent: Friday, November 29, 2002 12:52 AM
> To: steven james
> Cc: [EMAIL PROTECTED]
> S
On Thursday, November 28, 2002, at 05:59 PM, steven james wrote:
Greetings,
If the flash is in a socket, no problem. Believe it or not, the PLCC
flash
chips can be hot swapped (power ON). So, the best approach is to use a
spare chip for LinuxBIOS, and keep the original as a rescue chip.
Well
On Thu, 28 Nov 2002, steven james wrote:
> You will need either a non-conductive chip extractor. Boot under the
> normal BIOS, pull it, and insert the spare. Program, reboot. If it fails,
> re-insert the original and try again. Most of the boards in the project
> were developed that way.
note tha
Greetings,
If the flash is in a socket, no problem. Believe it or not, the PLCC flash
chips can be hot swapped (power ON). So, the best approach is to use a
spare chip for LinuxBIOS, and keep the original as a rescue chip.
You will need either a non-conductive chip extractor. Boot under the
norma
On Thursday, November 28, 2002, at 01:54 PM, steven james wrote:
Greetings,
It won't be possable to just remove the flash. However, you can flash
LinuxBIOS itself onto the plcc (square) flash, and have it load the
payload (kernel) from the DoC. It should be mostly a matter of
determining
where
Greetings,
It won't be possable to just remove the flash. However, you can flash
LinuxBIOS itself onto the plcc (square) flash, and have it load the
payload (kernel) from the DoC. It should be mostly a matter of determining
where the DOC is mapped intp memory.
G'day,
sjames
On Thu, 28 Nov 2002
15 matches
Mail list logo