YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I have tried to build the tg3--ide_disk.zelf and use it in fallback and
> normal but all failed.
>
> In fallback track:
> It said: Searching for image...
>
> In Normal track:
> It said: Wrong index
> I have use to cmos
Eric,
I have tried to build the tg3--ide_disk.zelf and use it in fallback and
normal but all failed.
In fallback track:
It said: Searching for image...
In Normal track:
It said: Wrong index
I have use to cmos_util to change boot track and BOOT_FIRST=HDD and
BOOT_S
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I switch to RH preview AMD 64 to build the kernel now the MB can finish the
> booting.
>
> I also try to boot local HD in normal boot. I use hda1 to store elf (
> Kernel+RAM disk). But LinuxBIOS seems don't recogonize the elf format. And
> failed.
Eric,
I switch to RH preview AMD 64 to build the kernel now the MB can finish the
booting.
I also try to boot local HD in normal boot. I use hda1 to store elf (
Kernel+RAM disk). But LinuxBIOS seems don't recogonize the elf format. And
failed.
I have use tg3.zelf to substitute the elf in the H
Eric,
Thanks for the Info, I can get two cpus running now. but it die in Kernel.
Ron,
I use 2.4.21 kernel and it died on
CPU 0: Machine Check Exception: 0007
Bank 3: b400083b at 00fdfc000cfe
Kernel panic: Unable to continue
Any advise.
Regards
Yinghai Lu
LinuxBIOS-1.
YhLu <[EMAIL PROTECTED]> writes:
> Eric,
>
> I have some questions about the APIC.
> How can I change the Second Opteron's APIC_ID? DO I need to make the second
> CPU run and its process access (APIC_DEFAULT_BASE+APIC_ID) and set (1<<24)
> to it.
You need to know the apic id before you can star
Eric,
I have some questions about the APIC.
How can I change the Second Opteron's APIC_ID? DO I need to make the second
CPU run and its process access (APIC_DEFAULT_BASE+APIC_ID) and set (1<<24)
to it.
Then When should start the process in auto.c or hardwaremain.c (
startup_other_cpus function)?
Ron,
I use 16M ramdisk that will downloaded into Node with Kernel at the same
time. So didn't use MTD etc.
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年6月25日 9:08
收件人: Eric W. Biederman
抄送: [EMAIL PROTECTED]
主题: Re: K8 + 2.4.21 + SuSE 64-bit
Ron,
Did you use SMP support or not?
I use NON-SMP support in Tyan S2880 and it die in the Kernel too.
Regards
Yinghai Lu
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2003年6月25日 8:13
收件人: [EMAIL PROTECTED]
主题: K8 + 2.4.21 + SuSE 64-bit mode + Arima HDAMA + 49LF040 + MTD
T
On 25 Jun 2003, Eric W. Biederman wrote:
> That is what I have working right now.
just checking, you're running the 64-bit kernel?
I guess I'll yank down the newest MTD cvs and try again.
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www
ron minnich <[EMAIL PROTECTED]> writes:
> The above combination works pretty well until I try to program the part,
> at which point the kernel takes an oops and dies.
>
> I'm wondering if anyone else has either:
> - seen this work
> - seen this fail
That is what I have working right now.
I
11 matches
Mail list logo