2007/5/14, roger [EMAIL PROTECTED]:
Would it help any if I made a list of items needed for proper Intel
northbridge (and possibly southbridge/smbus) initialization?
This is helpful.
I think 440bx might be a good mainboard to start learning linuxbios ?
Datasheets of Intel mainboards are
On Mon, 2007-05-14 at 14:07 +0800, Yuning Feng wrote:
2007/5/14, roger [EMAIL PROTECTED]:
Would it help any if I made a list of items needed for proper Intel
northbridge (and possibly southbridge/smbus) initialization?
This is helpful.
I think 440bx might be a good mainboard to start
On Mon, 2007-05-14 at 01:09 -0400, Corey Osgood wrote:
Too late, bought it about a month ago. Flashrom doesn't work on this
particular board, and besides, a dedicated programmer *should* be faster
than booting up, flashing, and then rebooting (unless you stripped a
distro down to nothing just
On Mon, 2007-05-14 at 06:55 +0200, Luc Verhaegen wrote:
As for the hardware:
* usb is at most only there as a powersupply. Which is not correct as
the amps drawn should be negotiated between host and endpoint. There's
no means to negotiate anything. Yes, people abuse usb like this a lot.
*
Hi all,
Are there routers which are using linuxbios? I looked at the
products page as well as vendors lists went to the sites but failed
to find anything.
In case, there is an device like that would it be possible say to use
such a device send diagnostic messages using telnet or something
Hi,
Peter Stuge :
So, do you think that a socket could fit if a compact flash card
reader does?
The socket I have in mind is from Emulation Technology:
http://www.emulation.com/catalog/off-the-shelf_solutions/sockets/tsop/
It's 5.33mm high which is more than the most slim CF sockets,
Sébastien Hinderer wrote:
Hi,
Peter Stuge :
So, do you think that a socket could fit if a compact flash card
reader does?
The socket I have in mind is from Emulation Technology:
http://www.emulation.com/catalog/off-the-shelf_solutions/sockets/tsop/
It's 5.33mm high which is more than
Luis,
On Monday 14 May 2007 10:07, Luis Correia wrote:
Maybe we are able to detect the SPD EEPROM on *some* boards. But never on
all boards. There are too many individual incarnations how you can
connect the I2C lines to your CPU (thanks to popconserve for the
reference schematics!).
Luis,
Boot your mainboard with your factory BIOS and dump the so called BC_*
registers and you are fine (a few registers at offset GX_BASE + 0x8400 up to
Ups, my fault. The MC_* are the relevant registers for SDRAM timing, not the
BC_* ones.
Juergen
--
linuxbios mailing list
On 14.05.2007 11:16, Corey Osgood wrote:
Yep, I know about uniflash, it's what I was using with this board
before. The problem still is getting the rom from my floppy-less laptop
to the other machine in a manner DOS can understand. I tried to get usb
working on a dos boot disk, but none of
* Luis Correia [EMAIL PROTECTED] [070513 23:59]:
What i'm seeking now is how to send these patches, one by one to the
mailing list, or opening tracker issues for them?
Both works fine.
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761
Quoting Carl-Daniel Hailfinger [EMAIL PROTECTED]:
On 14.05.2007 11:16, Corey Osgood wrote:
Yep, I know about uniflash, it's what I was using with this board
before. The problem still is getting the rom from my floppy-less laptop
to the other machine in a manner DOS can understand. I tried to
* [EMAIL PROTECTED] [EMAIL PROTECTED] [070514 13:34]:
Modified: trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c
===
--- trunk/LinuxBIOSv2/src/mainboard/amd/norwich/failover.c2007-05-11
19:23:57 UTC (rev 2663)
+++
On Mon, May 14, 2007 at 05:16:06AM -0400, Corey Osgood wrote:
It run in DOS and is written in Pascal. I used a FreeDOS livecd...
matter of fact, even installed FreeDOS to a 2nd partition with Uniflash.
Uniflash supports a vast number of flash parts.
Yep, I know about uniflash, it's
Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer uwe checked in revision 2664 to
the LinuxBIOS source repository and caused the following
changes:
Change Log:
AMD Norwich: minor cosmetic fixes and drop dead code (trivial).
Signed-off-by: Uwe
Hi everyone,
I'm intersting in this job that Augusto is doing and I'm in touch to him to
help with my efforts. Recently, I've tried to boot the windows 2k using
these same steps he've done. The only diference is that I've used Lilo as
bootloader instead of Grub. On my tests the Lilo seems to work
On Mon, May 14, 2007 at 12:33:44PM +0530, shirish wrote:
Are there routers which are using linuxbios?
Not that we know of.
D-Link 502-T
its pretty similar to how linux is .
Many consumer network appliances are embedded Linux systems.
They usually run on an ARM CPU and there has not
Ühel kenal päeval (esmaspäev 14 mai 2007 10:03 am) kirjutas shirish:
Hi all,
Are there routers which are using linuxbios? I looked at the
products page as well as vendors lists went to the sites but failed
to find anything.
You may find something by googling routerboard+linuxbios
On Mon, May 14, 2007 at 09:39:57AM +0200, Juergen Beisert wrote:
It seems to find a generic way to configure the SDRAM in a Geode
bases system is nearly impossible.
I think it can be done.
At last we need some information about
- the physical behaviour of the mainboard (line load, line
On Mon, May 14, 2007 at 12:02:06AM -0400, Corey Osgood wrote:
BTW, anyone have experience with using a Willem EEPROM programmer
under linux? I haven't been able to get the darn thing to work
through wine, nor will it work on Vista.
WINE has not implemented anything USB.
Vista uses a new USB
On Mon, May 14, 2007 at 05:02:14PM +0200, Peter Stuge wrote:
On Mon, May 14, 2007 at 12:02:06AM -0400, Corey Osgood wrote:
BTW, anyone have experience with using a Willem EEPROM programmer
under linux? I haven't been able to get the darn thing to work
through wine, nor will it work on
On Monday 14 May 2007 16:52, Peter Stuge wrote:
On Mon, May 14, 2007 at 09:39:57AM +0200, Juergen Beisert wrote:
It seems to find a generic way to configure the SDRAM in a Geode
bases system is nearly impossible.
I think it can be done.
At last we need some information about
- the
Ward Vandewege wrote:
On Sat, May 12, 2007 at 02:33:55PM +0200, Stefan Reinauer wrote:
* Ward Vandewege [EMAIL PROTECTED] [070511 23:35]:
On Fri, May 11, 2007 at 02:25:08PM -0700, yhlu wrote:
how about other MB not connect all of FAN etc.?
or they will need other threshold for PWM?
OK,
I'm having trouble with Tyan S2865 (K8 + CK804 Ultra), flashrom works
for SST49LF080 but not SST49LF016C, and I really wish it would(tm)
Thanks,
Jeremy
On Sat, 2007-05-12 at 14:17 +0200, Stefan Reinauer wrote:
* Jeremy Jackson [EMAIL PROTECTED] [070511 23:29]:
Ok, what about the AMD K8
Hi,
On 14.05.2007 09:03, shirish wrote:
Are there routers which are using linuxbios? I looked at the
products page as well as vendors lists went to the sites but failed
to find anything.
Extreme Networks offers routers which run linux (MIPS64 architecture).
I have no idea what sort of
On 5/14/07, Marc Jones [EMAIL PROTECTED] wrote:
Ward Vandewege wrote:
I'll work on moving the code to mainboard.c file.
Does it make sense to have an API letting the mainboard specific code
interface the component? Maybe even setting the FANs and threshold in
the config.lb file?
I
I recomment we save such good ideas for V3. I am going to start on my
first real V3 mainboard this week -- an LX board -- and we can start
getting real-world experience now.
thanks
ron
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
I have been told that there are routers using linuxbios, but that's
all I've ever been told.
one interesting thing: the BIOS costs are one reason that x86 has had
trouble getting acceptance in the embedded space, i am told (by
embedded systems vendors).
LinuxBIOS fixes this problem. Things like
On Sat, May 12, 2007 at 10:44:30AM -0400, Jeremy Jackson wrote:
I'm having trouble with Tyan S2865 (K8 + CK804 Ultra), flashrom
works for SST49LF080 but not SST49LF016C, and I really wish it
would(tm)
Perhaps you can help with more testing so the problem can be
identified? For starters:
* How
On Mon, 2007-05-14 at 05:16 -0400, Corey Osgood wrote:
If anyone working on the 440 has time, can you check the output of your
spd data and see if there's any non-00 or 0xff data in 0x7e and 0x7f
(aka 126/127)? This is part of the Intel SDRAM SPD standard, but not
officially part of JEDECs.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Luis,
On 5/14/07, Luis Correia [EMAIL PROTECTED] wrote:
Hi!
On 5/14/07, shirish [EMAIL PROTECTED] wrote:
Hi all,
Are there routers which are using linuxbios? I looked at the
products page as well as vendors lists went to the sites
roger wrote:
On Mon, 2007-05-14 at 05:16 -0400, Corey Osgood wrote:
If anyone working on the 440 has time, can you check the output of your
spd data and see if there's any non-00 or 0xff data in 0x7e and 0x7f
(aka 126/127)? This is part of the Intel SDRAM SPD standard, but not
officially
On Tue, May 15, 2007 at 02:58:44AM +0530, shirish wrote:
Are there routers which are using linuxbios? I looked at the
products page as well as vendors lists went to the sites but failed
to find anything.
Since there are no x86 compatible routers, your question does not make
On Tue, 2007-05-15 at 02:58 +0530, shirish wrote:
First of all thank you for answering to my query.
I'm still slightly confused. As per Linuxbios wiki page says it is to be used
also in embedded devices. I have been reading the wikipedia pages on the
the Linksys WRT54G series
On Monday 14 May 2007 10:20:10 ron minnich wrote:
one interesting thing: the BIOS costs are one reason that x86 has had
trouble getting acceptance in the embedded space, i am told (by
embedded systems vendors).
Another problem is that there's no x86 hardware to be accepted, at least in
I've taken notes on the following aspects of the Northbridge and am
reading the Intel published SPD pdf now.
The following is only some clippings of what is said in the main pdf and
the updates concerning DRAM config. I think I have yet to go through
each DRAM register looking for notes
Hello Yinghai,
have you tested PCI slot functions on the GA-M57SLI?
On 12.05.2007 21:50, ST wrote:
-01:07.0 0200: 10ec:8139 (rev 10)
Disappeared device? Realtek 8139 nic
-01:08.0 0280: 1244:0a00 (rev 02)
Disappeared device? AVM A1 ISDN card
-01:0a.0 0c00: 104c:8024 (prog-if 10 [OHCI])
On 5/14/07, Carl-Daniel Hailfinger [EMAIL PROTECTED] wrote:
Hello Yinghai,
have you tested PCI slot functions on the GA-M57SLI?
I forgot whether PCI cards in PCI slots need a LB config change or
should they work out of the box?
it should work out of the BOX, but irq routting in mptable
Is this right? Push #includes to the top of the file.
--
Roger
http://www.eskimo.com/~roger/index.html
Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61
Mon May 14 22:57:38 PDT 2007
Push includes to the top of the file.
Signed-off-by: Roger Zauner [EMAIL PROTECTED]
Index:
39 matches
Mail list logo
