the NIC should work, and only some problem with sata, but someone sent
patch for sata already. or merged?
yes. Sata is Ok for broadcom/bcm5785.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
The SPD address is composed with RC0, RC1 and DIMM0, DIMM1. But what is
RC0 and RC1?
We use SMBUS to read/write SPD information. if the mainboard has SMBUS Hub
such as pca9545, you need RC0 and RC1.
Different mainboard has different RC0 and RC1, who defines the two? DIMM
sockets or
Does anyone know where (waht file) PCI_ADDR is defined?
/src/arch/i386/include/arch/romcc_io.h
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
pci_ids ,
from 0x360~0x367.and 0x360 is default.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
I hate to say this, but it is probable that your dram is still not
programmed correctly :-(
I think that too.As I remember I had met the same error before when I
developed MS9185. and it was all because the dram was programmed
incorrectly.
bxshi
--
linuxbios mailing list
linuxbios
What Linux Distro is everyone using to build LinuxBIOS? I only ask
because the one I am using is having an issue right now.
I use Suse 10.1.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
I know Erik Andersen's buildrom maybe help, but when i type make all I
cannot compile the code successfully.
what error have you met ? if you can get olpc-payload.elf and
olpc-payload.elf.lzma in the deploy directory i think that is enough.
--
linuxbios mailing list
* I don't know whether the code will actually build or work without
the changes in yh_rest_of_patch.patch (probably not).
It should rename ROM_STREAM to ROM_PAYLOAD in Config.lb and Options.lb of
mainboard directory , otherwise it can't compile.
bxshi
--
linuxbios mailing list
linuxbios
Committed, thanks!
Thank you!
bxshi
*CONFIDENTIAL INFORMATION*
This email is intended only for the use of the person or entity to whom it is
addressed and contains information that may be subject to and/or may be
restricted from disclosure by contract or applicable law. If you
this.
signed-off-by : bxshi [EMAIL PROTECTED]
===
--- src/southbridge/nvidia/mcp55/mcp55_smbus.h (revision 2544)
+++ src/southbridge/nvidia/mcp55/mcp55_smbus.h (working copy)
@@ -80,9 +80,7 @@
/* set the device I'm talking too
broadcom nicon pcie bridge ok
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
has w83627EHG. as I have tested ,yinghai's code is ok.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
=off devfs=nomount #ramdisk_size=65536 console=ttyS0,115200
it installs OS well . it seems we don't need to specify CDROM to hdb1 .hdb
works well.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
want to enable to this
register. for example , if my memory controller is on channel 2 , we should
write outb(2,smbus_io_base+SMBHSTCMD).
So could that be changed tooutb(val,smbus_io_base + SMBHSTCMD) ?
Thanks
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org
.
we need only case 0 for winbond superio.
bxshi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
.
Memory:
*Support 4 DDR2 FBDIMMs
*2 Way Interleaved DDR2 533/667 registered ECC DIMM
*Maximum 16 GB support with DDR2 533/667
Thanks
bxshi
*CONFIDENTIAL INFORMATION*
This email is intended only for the use of the person or entity to whom it is
addressed and contains information
know if
there is copyright or if the author will agree?
bxshi
*CONFIDENTIAL INFORMATION*
This email is intended only for the use of the person or entity to whom it is
addressed and contains information that may be subject to and/or may be
restricted from disclosure by contract
www.linuxbios.org
Dear carl-Daniel ,Stefan ,Yinghai,ron,uwe,
Owen is our Desktop BIOS manager , if you need some help of MSI K9N Nero ,you
can contact with him .He is preparing help .
Thanks
bxshi
-邮件原件-
发件人: owenchen [mailto:[EMAIL PROTECTED]
发送时间: 2006年11月10日 14:04
收件人: bxshi(石炳勛=研發)
抄送
www.linuxbios.org
Dear carl-Daniel ,Stefan ,Yinghai,ron,uwe:
Owen is our Desktop BIOS manager , if you need some help of MSI K9N Nero ,you
can contact with him .He is preparing help .
Thanks
bxshi
-邮件原件-
发件人: owenchen [mailto:[EMAIL PROTECTED]
发送时间: 2006年11月10日 14:04
收件人: bxshi(石炳勛=研發)
抄送
Dear all,
Sorry . please contact their PM
[EMAIL PROTECTED]
[EMAIL PROTECTED]
bxshi
-邮件原件-
发件人: bxshi(石炳勛=研發)
发送时间: 2006年11月10日 14:24
收件人: owenchen(陳慶濃=研發)
抄送: 'Carl-Daniel Hailfinger'; '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'; '[EMAIL
PROTECTED]'; '[EMAIL PROTECTED]'; 'linuxbios
committed.
Do it freely. It is OK.
Bxshi
*CONFIDENTIAL INFORMATION*
This email is intended only for the use of the person or entity to whom it is
addressed and contains information that may be subject to and/or may be
restricted from disclosure by contract or applicable law. If you
some problem with our vga .after add that line ,it works.
Thanks.
bxshi
*CONFIDENTIAL INFORMATION*
This email is intended only for the use of the person or entity to whom it is
addressed and contains information that may be subject to and/or may be
restricted from disclosure by contract
Ed,
I have read your code . to make IDE work ,I think it is more simple, you
don't need to change the southbridge part.it is OK ,at least IDE is work fine
for me. maybe you have to check your irq or config file.
bxshi
*CONFIDENTIAL INFORMATION*
1
This email is intended only
Dear Dr. Lu,
I tried to boot kernel on
ide hdd with etherboot , but after it shown “Jumping to entry point ” ,
it restart again and again. (the log is below) ? what maybe the problem?
And is there any good news
for Nvidia mcp55?
Thanks.
bxshi
Etherboot 5.4.2
(GPL) http
Dr. Lu,
Use the new kernel seems more effective . I installed suse10.0(64bit ) +
kernel(2.6.18-rc5) and use mkelfImage build elf . and
I find the elf image boot quite fine.
I can jump into OS now though
many devices do not fuction.
Thanks
bxshi
发件人: Lu,
Yinghai [mailto
25 matches
Mail list logo