On Wed, Aug 01, 2007 at 08:50:30AM -0300, Otávio Alcântara wrote:
I've used memtest as a payload and the test was sucessfully.
How long did you leave it running? 24 hours is good to make sure.
Any other idea for the RAMDISK blow up?
It's usually because of bad RAM, unless there is a
Hello to all,
On 8/1/07, Peter Stuge [EMAIL PROTECTED] wrote:
How long did you leave it running? 24 hours is good to make sure.
We spent more than a day on test, but today I've tried another initrd and
the boot was okay, just some problems with USB keyboard.
Thanks,
Otavio Alcântara
On
Looks like the RAMDISK is blowing up. Try without it. Try running a
memory test. You can built memtest as a payload.
Marc
Otávio Alcântara wrote:
Marc wrote:
Otávio,
Correct, you can't get graphics until a driver is loaded. For a
test/debug setup that uses the filo menu will
On 20/06/07 10:08 -0300, Otávio Alcântara wrote:
Hello to all,
I'm porting a linuxbios v2 version for a board ref des LXUVCRDK (
http://www.amd.com/geodelxuvcrdk) based on norwich board. I've already got
to boot linux from HD, but it seems to halt in some point (see log below
Otávio Alcântara wrote:
Hello to all,
I'm porting a linuxbios v2 version for a board ref des
LXUVCRDK (http://www.amd.com/geodelxuvcrdk) based on norwich board. I've
already got to boot linux from HD, but it seems to halt in some point
(see log below captured from serial).
Thanks for the help. But I have another doubt, I'm not getting video working
even after the linux kernel boots. What do I do to change the console to
video? I've configured Filo to use video console, but the stream goes only
to serial interface.
Regards,
Otávio Alcântara
On 6/20/07, Marc Jones
Otávio Alcântara wrote:
Thanks for the help. But I have another doubt, I'm not getting video
working even after the linux kernel boots. What do I do to change the
console to video? I've configured Filo to use video console, but the
stream goes only to serial interface.
Regards,
