Dear LinuxBIOS readers! This is the automated build check service of LinuxBIOS.
The developer "uwe" checked in revision 2896 to the LinuxBIOS source repository and caused the following changes: Change Log: Some fixes for the BCOM WinNET100, mostly in Config.lb: - Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <[EMAIL PROTECTED]> Acked-by: Stefan Reinauer <[EMAIL PROTECTED]> Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=hdama&vendor=arima Configuration of bcom:winnet100 has been fixed Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e325&vendor=ibm Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e326&vendor=ibm Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=juki-511p&vendor=iei Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8s2&vendor=iwill Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8x&vendor=iwill Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=khepri&vendor=newisys If something broke during this checkin please be a pain in uwe's neck until the issue is fixed. If this issue is not fixed within 24h the revision should be backed out. Best regards, LinuxBIOS automatic build system -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios