Add usb2 controller node for P1020RDB, P2020RDB, P2020DS, P1021MDS
Signed-off-by: Ramneek Mehresh
---
Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
(branch next)
arch/powerpc/boot/dts/p1020rdb.dtsi |2 ++
arch/powerpc/boot/dts/p1021mds.dts |3 ++-
arch/powe
Enable USB2 controller node for P1020RDB. USB2 controller is used only
when board boots from SPI or SD as it is muxed with eLBC
Signed-off-by: Ramneek Mehresh
---
Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
(branch next)
arch/powerpc/boot/dts/p1020rdb.dtsi | 11
Add usb controller version info for the following:
MPC8536, P1010, P1020, P1021, P1022, P1023, P2020, P2041,
P3041, P3060, P5020
Signed-off-by: Ramneek Mehresh
---
Applies on git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
(branch next)
arch/powerpc/boot/dts/fsl/mpc8536si-post.d
On Tue, 17 Jan 2012 at 20:13, Christian Kujau wrote:
>
> compiling today's git (mainline, a25a2b8) on powerpc32 gives:
>
> CC arch/powerpc/kernel/crash.o
> cc1: warnings being treated as errors
> /usr/local/src/linux-2.6-git/arch/powerpc/kernel/crash.c:49: error:
> ‘cpus_in_crash’ defined
Hi,
compiling today's git (mainline, a25a2b8) on powerpc32 gives:
CC arch/powerpc/kernel/crash.o
cc1: warnings being treated as errors
/usr/local/src/linux-2.6-git/arch/powerpc/kernel/crash.c:49: error:
‘cpus_in_crash’ defined but not used
make[2]: *** [arch/powerpc/kernel/crash.o] Error
Freescale IFC NAND Machine calculates ECC on 512byte sector and same is used in
fsl_ifc_run_command() during ECC status verification. Also this sector is passed
to is_blank() for blank checking. It is wrong at first place because
is_blank()'s implementation checks for Page size and OOB area size.
On Tue, 2012-01-17 at 17:28 -0700, Grant Likely wrote:
> BTW: Ben, if you can carve out some time, I'd appreciate a look over
> my series and make sure you're okay with it. Once it's had some
> testing by arm and ppc folks, I want to get it into linux-next.
I intend to do so but not while I'm at
On 01/13/2012 04:57 AM, Liu Qiang-B32616 wrote:
No, I didn't test small file. I think this won't affect system load. I can have
a test
and describe the result in next patch.
Please do...
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
ht
On Thu, Jan 12, 2012 at 3:17 AM, Milton Miller wrote:
> On Wed Jan 11 2012 about 15:24:34 EST, Grant Likely wrote:
>> There is only one user, and it is trivial to open-code.
>
> I added virq_is_host because I had planned to change how we find the
> host (domain) from a virq.
>
> Instead of storing
On Mon, Jan 16, 2012 at 8:42 PM, Benjamin Herrenschmidt
wrote:
> On Mon, 2012-01-16 at 18:43 -0800, Michael Bohan wrote:
>>
>> I was planning on sending these patches out, but it seems like with
>> Grant's patches, they may no longer be up to date. I was curious if any
>> thought was given to supp
On Jan 12, 2012, at 3:55 AM, Julia Lawall wrote:
> From: Julia Lawall
>
> Add missing iounmap in error handling code, in a case where the function
> already preforms iounmap on some other execution path.
>
> A simplified version of the semantic match that finds this problem is as
> follows: (h
On Jan 12, 2012, at 4:04 AM, Zhicheng Fan wrote:
> nand: Sync base address with U-boot
> sdhc: Add suppot auto cmd12
>
> Signed-off-by: Zhicheng Fan
> ---
> arch/powerpc/boot/dts/fsl/p1020si-post.dtsi |3 +++
> arch/powerpc/boot/dts/p1020rdb.dts |2 +-
> arch/powerpc/boot/dts/p10
On Jan 4, 2012, at 7:40 PM, wrote:
> From: Jerry Huang
>
> Accordint to latest kernel, the auto-cmd12 property should be
> "sdhci,auto-cmd12", and according to the SDHC binding and the workaround for
> the special chip, add the chip compatible for eSDHC: "fsl,p1022-esdhc",
> "fsl,mpc8536-esdh
Ben,
Pulled in a few other minor fixes, in addition the the compile issue on
p1022.
- k
The following changes since commit c2bc3a316a7281f67e36b34dac2802cbe36a9128:
Merge branch 'x86/rdrand' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip (2012-01-16 18:23:09
-0800)
are available
On 01/17/2012 10:56 AM, Norbert van Bolhuis wrote:
> On 01/16/12 21:22, Scott Wood wrote:
>> On 01/13/2012 08:13 AM, Norbert van Bolhuis wrote:
>>> I dumped SIPNR/SIMSR and uart IIR/EIR (since console triggers wake-up)
>>> but they do not change just before entering standby (via
>>> mpc6xx_enter_st
On 01/17/2012 12:57 PM, Kumar Gala wrote:
>
> On Jan 9, 2012, at 7:10 PM, Scott Wood wrote:
>
>> On 01/09/2012 06:24 AM, Prabhakar Kushwaha wrote:
>>> 1) OOB area should be updated irrespective of NAND page size. Earlier it was
>>> updated only for 512byte NAND page.
>>>
>>> 2) During OOB update
On Jan 9, 2012, at 7:10 PM, Scott Wood wrote:
> On 01/09/2012 06:24 AM, Prabhakar Kushwaha wrote:
>> 1) OOB area should be updated irrespective of NAND page size. Earlier it was
>> updated only for 512byte NAND page.
>>
>> 2) During OOB update fbcr should be equal to OOB size.
>>
>> Signed-off-
On Tue, 2012-01-17 at 09:20 -0800, Stephen Warren wrote:
> Michal Marek wrote at Saturday, January 14, 2012 3:51 PM:
> > On 11.1.2012 20:36, Mark Salter wrote:
> > > On Mon, 2012-01-09 at 11:38 -0700, Stephen Warren wrote:
> > >> This hooks dtc into Kbuild's dependency system.
> > >>
> > >> Thus, f
Michal Marek wrote at Saturday, January 14, 2012 3:51 PM:
> On 11.1.2012 20:36, Mark Salter wrote:
> > On Mon, 2012-01-09 at 11:38 -0700, Stephen Warren wrote:
> >> This hooks dtc into Kbuild's dependency system.
> >>
> >> Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
> >> t
On 01/16/12 21:22, Scott Wood wrote:
On 01/13/2012 08:13 AM, Norbert van Bolhuis wrote:
I dumped SIPNR/SIMSR and uart IIR/EIR (since console triggers wake-up)
but they do not change just before entering standby (via
mpc6xx_enter_standby
which omits setting MSR_POW). uart IRQ is always enabled, u
On 06.01.2012 19:03, Alan Stern wrote:
> On Fri, 6 Jan 2012, Matthias Fuchs wrote:
>
>> For my eyes it does not really look like a general USB issue.
>> It looks like a problem with the Freescale EHCI implementation that is
>> influenced by high interrupt or internal bus load caused by the flood p
On 17.01.2012, at 12:31, Paul Mackerras wrote:
> On Tue, Jan 17, 2012 at 10:27:26AM +0100, Alexander Graf wrote:
>
>> The thing I was getting at was not the map during the lifetime, but
>> the map during registration. Currently we have:
>>
>> 1) Set VPA to x
>> 2) Assign feature y to VPA
>> 3)
On Tue, Jan 17, 2012 at 10:27:26AM +0100, Alexander Graf wrote:
> The thing I was getting at was not the map during the lifetime, but
> the map during registration. Currently we have:
>
> 1) Set VPA to x
> 2) Assign feature y to VPA
> 3) Use VPA
>
> 1 and 2 are the slow path, 3 occurs more frequ
The properties indicates that the hardware supports waking up via magic packet.
Signed-off-by: Xie Xiaobo
---
arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi |3 ++-
arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi |3 ++-
arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi |3 ++-
arch/powerpc/boot/
1. Add partitions for NOR and NAND Flash.
2. Additional attributes for sdhc.
Signed-off-by: Xie Xiaobo
---
arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi |5 ++
arch/powerpc/boot/dts/mpc8536ds.dts |6 ++-
arch/powerpc/boot/dts/mpc8536ds.dtsi | 93 +
On 17.01.2012, at 06:56, Paul Mackerras wrote:
> On Mon, Jan 16, 2012 at 02:04:29PM +0100, Alexander Graf wrote:
>>
>> On 20.12.2011, at 11:22, Paul Mackerras wrote:
>
>>> @@ -152,6 +152,8 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu
>>> *vcpu,
>>>flags &= 7;
>>>if (flag
P1021RDB-PC Overview
-
1Gbyte DDR3 (on board DDR)
16Mbyte NOR flash
32Mbyte eSLC NAND Flash
256 Kbit M24256 I2C EEPROM
128 Mbit SPI Flash memory
Real-time clock on I2C bus
SD/MMC connector to interface with the SD memory card
PCIex
- x1 PCIe slot or x1 PCIe to dual SATA controll
27 matches
Mail list logo