On Fri, 18 May 2018 at 17:06, Anju T Sudhakar wrote:
>
> Call trace observed while running perf-fuzzer:
>
> [ 329.228068] CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted
> 4.13.0-32-generic #35~lp1746225
> [ 329.228070] task: c03f776ac900 task.stack: c03f77728000
> [ 329.228071] NIP:
Le 01/08/2018 à 23:33, Murilo Opsfelder Araujo a écrit :
show_user_instructions() is a slightly modified version of
show_instructions() that allows userspace instruction dump.
This will be useful within show_signal_msg() to dump userspace
instructions of the faulty location.
Here is a
On 08/01/2018 11:28 AM, Nicholas Piggin wrote:
> On Wed, 04 Jul 2018 23:28:21 +0530
> Mahesh J Salgaonkar wrote:
>
>> From: Mahesh Salgaonkar
>>
>> On pseries, as of today system crashes if we get a machine check
>> exceptions due to SLB errors. These are soft errors and can be fixed by
>>
From: Abhishek Goel
If a state has "opal-supported" compat flag in device-tree, an opal call
needs to be made during the entry and exit of the stop state. This patch
passes a hint to the power9_idle_stop and power9_offline_stop.
This patch moves the saving and restoring of sprs for P9 cpuidle
Passing pointer to the pnv_idle_state instead of psscr value and mask.
This helps us to pass more information to the stop loop. This will help to
figure out the method to enter/exit idle state.
Signed-off-by: Akshay Adiga
---
arch/powerpc/include/asm/processor.h | 3 +-
This patch adds support for new device-tree format for idle state
description.
Previously if a older kernel runs on a newer firmware, it may enable
all available states irrespective of its capability of handling it.
New device tree format adds a compatible flag, so that only kernel
which has the
Previously if a older kernel runs on a newer firmware, it may enable
all available states irrespective of its capability of handling it.
New device tree format adds a compatible flag, so that only kernel
which has the capability to handle the version of stop state will enable
it.
Older kernel
Hi all,
[forgot the conflict resolution ...]
On Thu, 2 Aug 2018 09:27:20 +1000 Stephen Rothwell
wrote:
>
> Today's linux-next merge of the powerpc tree got a conflict in:
>
> arch/m68k/mac/misc.c
>
> between commit:
>
> 5b9bfb8ec467 ("m68k: mac: Use time64_t in RTC handling")
>
> from
Hi all,
Today's linux-next merge of the powerpc tree got a conflict in:
arch/m68k/mac/misc.c
between commit:
5b9bfb8ec467 ("m68k: mac: Use time64_t in RTC handling")
from the m68k tree and commit:
ebd722275f9c ("macintosh/via-pmu: Replace via-pmu68k driver with via-pmu
driver")
from
On Wed, Aug 01, 2018 at 10:05:35AM +0100, Will Deacon wrote:
> Hi Christoph,
>
> On Wed, Aug 01, 2018 at 01:36:39AM -0700, Christoph Hellwig wrote:
> > On Wed, Aug 01, 2018 at 09:16:38AM +0100, Will Deacon wrote:
> > > On arm/arm64, the problem we have is that legacy virtio devices on the
> > >
On Wed, Aug 01, 2018 at 01:36:39AM -0700, Christoph Hellwig wrote:
> On Wed, Aug 01, 2018 at 09:16:38AM +0100, Will Deacon wrote:
> > On arm/arm64, the problem we have is that legacy virtio devices on the MMIO
> > transport (so definitely not PCI) have historically been advertised by qemu
> > as
On Tue, Jul 31, 2018 at 03:36:22PM -0500, Benjamin Herrenschmidt wrote:
> On Tue, 2018-07-31 at 10:30 -0700, Christoph Hellwig wrote:
> > > However the question people raise is that DMA API is already full of
> > > arch-specific tricks the likes of which are outlined in your post linked
> > >
From: Christophe Leroy
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot
allocate memory)
--- SIGSEGV {si_signo=SIGSEGV,
-07-31
09:55:45 -0300)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git
tags/perf-core-for-mingo-4.19-20180801
for you to fetch changes up to b912885ab75c7c8aa841c615108afd755d0b97f8:
perf trace: Do not require --no-syscalls to suppress
This adds VMA address in the message printed for unhandled signals,
similarly to what other architectures, like x86, print.
Before this patch, a page fault looked like:
pandafault[61470]: unhandled signal 11 at 17d0 nip 161c lr
7fff8d185100 code 2
After this patch, a page fault looks
show_user_instructions() is a slightly modified version of
show_instructions() that allows userspace instruction dump.
This will be useful within show_signal_msg() to dump userspace
instructions of the faulty location.
Here is a sample of what show_user_instructions() outputs:
Call show_user_instructions() in arch/powerpc/kernel/traps.c to dump
instructions at faulty location, useful to debugging.
Before this patch, an unhandled signal message looked like:
pandafault[10524]: segfault (11) at 17d0 nip 161c lr 7fffbd295100
code 2 in pandafault[1000+1]
Use %lx format to print registers. This avoids having two different
formats and avoids checking for MSR_64BIT, improving readability of the
function.
Even though we could have used %px, which is functionally equivalent to %lx
as per Documentation/core-api/printk-formats.rst, it is not
Replace printk_ratelimited() by printk() and a default rate limit
burst to limit displaying unhandled signals messages.
This will allow us to call print_vma_addr() in a future patch, which
does not work with printk_ratelimited().
Signed-off-by: Murilo Opsfelder Araujo
---
Isolate the logic of printing unhandled signals out of _exception_pkey().
No functional change, only code rearrangement.
Signed-off-by: Murilo Opsfelder Araujo
---
arch/powerpc/kernel/traps.c | 26 --
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git
Hi, everyone.
This series was inspired by the need to modernize and display more
informative messages about unhandled signals.
The "unhandled signal NN" is not very informative. We thought it would
be helpful adding a human-readable message describing what the signal
number means, printing the
On 08/01/2018 09:26 AM, Michael Ellerman wrote:
> Frank Rowand writes:
>> On 07/31/18 07:17, Rob Herring wrote:
>>> On Tue, Jul 31, 2018 at 12:34 AM Michael Ellerman
>>> wrote:
Hi Rob/Frank,
I think we might have a problem with the phandle_cache not interacting
well
On Wed, Aug 1, 2018 at 7:36 AM, Michael Ellerman wrote:
> Christian Zigotzky writes:
>
>> Just for info: I tested it on my Nemo board today and it works.
>
> Awesome thanks.
>
> That's probably sufficient to merge it, and if it breaks anything we can
> always revert it.
Should be fine, all
On Wed, 1 Aug 2018 18:37:35 +1000
Alexey Kardashevskiy wrote:
> On 01/08/2018 00:29, Alex Williamson wrote:
> > On Tue, 31 Jul 2018 14:03:35 +1000
> > Alexey Kardashevskiy wrote:
> >
> >> On 31/07/2018 02:29, Alex Williamson wrote:
> >>> On Mon, 30 Jul 2018 18:58:49 +1000
> >>> Alexey
Hi, Christophe.
On Wed, Aug 01, 2018 at 08:41:15AM +0200, Christophe LEROY wrote:
>
>
> Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
> > Remove "Instruction dump:" line by adding a prefix to display current->comm
> > and current->pid, along with the instructions dump.
> >
> > The
Looks good,
Reviewed-by: Christoph Hellwig
Hi, Segher.
On Wed, Aug 01, 2018 at 02:49:03AM -0500, Segher Boessenkool wrote:
> On Wed, Aug 01, 2018 at 12:03:50AM -0700, Joe Perches wrote:
> > On Wed, 2018-08-01 at 08:37 +0200, Christophe LEROY wrote:
> > > Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
> > > I would suggest to
On Wed, Aug 01, 2018 at 12:03:50AM -0700, Joe Perches wrote:
> On Wed, 2018-08-01 at 08:37 +0200, Christophe LEROY wrote:
> > Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
> > > This adds a human-readable name in the unhandled signal message.
> > > Before this patch, a page fault looked
Em Wed, Aug 01, 2018 at 11:37:30AM +0200, Christophe LEROY escreveu:
>
>
> Le 03/05/2018 à 15:40, Arnaldo Carvalho de Melo a écrit :
> > Em Fri, Sep 22, 2017 at 01:20:43PM +0200, Christophe Leroy escreveu:
> > > After update of kernel, perf tool doesn't run anymore on my
> > > 32MB RAM powerpc
Christian Zigotzky writes:
> Just for info: I tested it on my Nemo board today and it works.
Awesome thanks.
That's probably sufficient to merge it, and if it breaks anything we can
always revert it.
cheers
> On 31 July 2018 at 2:04PM, Michael Ellerman wrote:
>> Michael Ellerman writes:
>>>
Tyrel Datwyler writes:
> On 07/30/2018 11:42 PM, Michael Ellerman wrote:
>> Tyrel Datwyler writes:
>>> On 07/29/2018 06:11 AM, Michael Bringmann wrote:
During LPAR migration, the content of the device tree/sysfs may
be updated including deletion and replacement of nodes in the
Frank Rowand writes:
> On 07/31/18 07:17, Rob Herring wrote:
>> On Tue, Jul 31, 2018 at 12:34 AM Michael Ellerman
>> wrote:
>>>
>>> Hi Rob/Frank,
>>>
>>> I think we might have a problem with the phandle_cache not interacting
>>> well with of_detach_node():
>>
>> Probably needs a similar fix as
Christophe LEROY writes:
> Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
>> Remove "Instruction dump:" line by adding a prefix to display current->comm
>> and current->pid, along with the instructions dump.
>>
>> The prefix can serve as a glue that links the instructions dump to its
John Allen writes:
> On Mon, Jul 23, 2018 at 11:41:24PM +1000, Michael Ellerman wrote:
>>John Allen writes:
>>
>>> While handling PRRN events, the time to handle the actual hotplug events
>>> dwarfs the time it takes to perform the device tree updates and queue the
>>> hotplug events. In the
On 2018-08-01 05:54 AM, Christoph Hellwig wrote:
On Tue, Jul 31, 2018 at 10:29:54AM -0400, Alexei Colin wrote:
Platforms with a PCI bus will be offered the RapidIO menu since they may
be want support for a RapidIO PCI device. Platforms without a PCI bus
that might include a RapidIO IP block
Hi John,
I'm still not sure about this one.
John Allen writes:
> On Mon, Jul 23, 2018 at 11:27:56PM +1000, Michael Ellerman wrote:
>>Hi John,
>>
>>I'm a bit puzzled by this one.
>>
>>John Allen writes:
>>> When a PRRN event is being handled and another PRRN event comes in, the
>>> second event
On 07/31/2018 10:06 PM, Luiz Capitulino wrote:
On Tue, 31 Jul 2018 06:01:44 +
Alexandre Ghiti wrote:
[CC linux-mm for inclusion in -mm tree]
In order to reduce copy/paste of functions across architectures and then
make riscv hugetlb port (and future ports) simpler and smaller, this
Benjamin Herrenschmidt writes:
> diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c
> b/arch/powerpc/platforms/powernv/opal-irqchip.c
> index 9d1b8c0aaf93..46785eaf625d 100644
> --- a/arch/powerpc/platforms/powernv/opal-irqchip.c
> +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
>
On Wed 01-08-18 21:09:39, Michael Ellerman wrote:
> Michal Hocko writes:
> > On Wed 25-07-18 13:11:15, John Allen wrote:
> > [...]
> >> Does a failure in do_migrate_range indicate that the range is unmigratable
> >> and the loop in __offline_pages should terminate and goto failed_removal?
> >>
Michal Hocko writes:
> On Wed 25-07-18 13:11:15, John Allen wrote:
> [...]
>> Does a failure in do_migrate_range indicate that the range is unmigratable
>> and the loop in __offline_pages should terminate and goto failed_removal? Or
>> should we allow a certain number of retrys before we
>> give
Hi Richard,
> -Original Message-
> From: Richard Cochran [mailto:richardcoch...@gmail.com]
> Sent: Wednesday, August 1, 2018 2:15 PM
> To: Y.b. Lu
> Cc: net...@vger.kernel.org; Madalin-cristian Bucur
> ; Rob Herring ; Shawn Guo
> ; David S . Miller ;
> devicet...@vger.kernel.org;
This patch is to support automatic configuration for ptp timer.
If required ptp dts properties are not provided, driver could
try to calculate a set of default configurations to initialize
the ptp timer. This makes the driver work for many boards which
don't have the required ptp dts properties in
This patch is to add clocks property for fman ptp timer node.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- None.
---
arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git
This patch is to add clocks property for fman ptp timer node.
Signed-off-by: Yangbo Lu
---
Changes for v2:
- None.
---
arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi |1 +
arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi |1 +
arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi |1 +
On Tue, Jul 31, 2018 at 10:29:54AM -0400, Alexei Colin wrote:
> Platforms with a PCI bus will be offered the RapidIO menu since they may
> be want support for a RapidIO PCI device. Platforms without a PCI bus
> that might include a RapidIO IP block will need to "select HAS_RAPIDIO"
> in the
Le 03/05/2018 à 15:40, Arnaldo Carvalho de Melo a écrit :
Em Fri, Sep 22, 2017 at 01:20:43PM +0200, Christophe Leroy escreveu:
After update of kernel, perf tool doesn't run anymore on my
32MB RAM powerpc board, but still runs on a 128MB RAM board:
Cleaning up my inbox, found this one,
Frederic Barrat writes:
> With the optimizations for TLB invalidation from commit 0cef77c7798a
> ("powerpc/64s/radix: flush remote CPUs out of single-threaded
> mm_cpumask"), the scope of a TLBI (global vs. local) can now be
> influenced by the value of the 'copros' counter of the memory
Hi Christoph,
On Wed, Aug 01, 2018 at 01:36:39AM -0700, Christoph Hellwig wrote:
> On Wed, Aug 01, 2018 at 09:16:38AM +0100, Will Deacon wrote:
> > On arm/arm64, the problem we have is that legacy virtio devices on the MMIO
> > transport (so definitely not PCI) have historically been advertised
On Wed, Aug 01, 2018 at 09:16:38AM +0100, Will Deacon wrote:
> On arm/arm64, the problem we have is that legacy virtio devices on the MMIO
> transport (so definitely not PCI) have historically been advertised by qemu
> as not being cache coherent, but because the virtio core has bypassed DMA
> ops
This patch adds a test for testing the new assembly strlen() for PPC32
Signed-off-by: Christophe Leroy
---
v8: removed defines in ppc_asm.h that were added in v6 (not used anymore since
v7) ; added missing link to strlen_32.S
v7: reduced the scope to PPC32
v6: added additional necessary
The generic implementation of strlen() reads strings byte per byte.
This patch implements strlen() in assembly based on a read of entire
words, in the same spirit as what some other arches and glibc do.
On a 8xx the time spent in strlen is reduced by 3/4 for long strings.
strlen() selftest on
This patch adds a test for strlen()
string.c contains a copy of strlen() from lib/string.c
The test first tests the correctness of strlen() by comparing
the result with libc strlen(). It tests all cases of alignment.
It them tests the duration of an aligned strlen() on a 4 bytes string,
on a 16
This patch renames memcmp test to memcmp_64 and adds
a memcmp_32 test for testing the 32 bits version of memcmp()
Signed-off-by: Christophe Leroy
---
v8: rebased on latest powerpc/merge
v7: no change
v6: no change
v5: no change
v4: new
tools/testing/selftests/powerpc/stringloops/Makefile
On 01/08/2018 00:29, Alex Williamson wrote:
> On Tue, 31 Jul 2018 14:03:35 +1000
> Alexey Kardashevskiy wrote:
>
>> On 31/07/2018 02:29, Alex Williamson wrote:
>>> On Mon, 30 Jul 2018 18:58:49 +1000
>>> Alexey Kardashevskiy wrote:
After some local discussions, it was pointed out that
On Tue, Jul 31, 2018 at 03:36:22PM -0500, Benjamin Herrenschmidt wrote:
> On Tue, 2018-07-31 at 10:30 -0700, Christoph Hellwig wrote:
> > > However the question people raise is that DMA API is already full of
> > > arch-specific tricks the likes of which are outlined in your post linked
> > >
Hi Abdul
On 08/01/2018 02:33 PM, Abdul Haleem wrote:
> # mkfs -t ext4 /dev/mapper/mpatha
> mke2fs 1.43.1 (08-Jun-2016)
> Found a dos partition table in /dev/mapper/mpatha
> Proceed anyway? (y,n) y
> Discarding device blocks:
> qla2xxx [0106:a0:00.1]-801c:2: Abort command issued nexus=2:1:0 -- 1
On Wed, Aug 01, 2018 at 12:03:50AM -0700, Joe Perches wrote:
> On Wed, 2018-08-01 at 08:37 +0200, Christophe LEROY wrote:
> > Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
> > I would suggest to instead use a function like this:
> >
> > static const char *signame(int signr)
> > {
> >
On Wed, 2018-08-01 at 08:37 +0200, Christophe LEROY wrote:
> Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
> > This adds a human-readable name in the unhandled signal message.
> > Before this patch, a page fault looked like:
> >pandafault[6303]: unhandled signal 11 at 17d0 nip
Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
Remove "Instruction dump:" line by adding a prefix to display current->comm
and current->pid, along with the instructions dump.
The prefix can serve as a glue that links the instructions dump to its
originator, allowing messages to be
Le 31/07/2018 à 16:50, Murilo Opsfelder Araujo a écrit :
This adds a human-readable name in the unhandled signal message.
Before this patch, a page fault looked like:
pandafault[6303]: unhandled signal 11 at 17d0 nip 161c lr
7fff93c55100 code 2 in pandafault[1000+1]
Greeting's
linux-next kernel crashes when creating file system on scsi disks using
mkfs.ext4 (Discarding device blocks)
Machine: Power 8 Power VM LPAR
kernel : 4.18.0-rc6-next-20180727
adapter : Fibre Channel [0c04]: QLogic Corp. ISP2532-based 8Gb Fibre Channel to
PCI Express HBA [1077:2532]
On Wed, Aug 01, 2018 at 04:36:40AM +, Y.b. Lu wrote:
> Could I add a function to calculate a set of default register values
> to initialize ptp timer when dts method failed to get required
> properties in driver?
Yes, it would be ideal if the driver can pick correct values
automatically.
On Mon, 9 Jul 2018 18:02:39 +0200
Michal Suchánek wrote:
> On Fri, 6 Jul 2018 19:40:24 +1000
> Nicholas Piggin wrote:
>
> > On Wed, 04 Jul 2018 23:30:12 +0530
> > Mahesh J Salgaonkar wrote:
> >
> > > From: Mahesh Salgaonkar
> > >
> > > Now that other platforms also implements real mode
On Wed, 04 Jul 2018 23:28:21 +0530
Mahesh J Salgaonkar wrote:
> From: Mahesh Salgaonkar
>
> On pseries, as of today system crashes if we get a machine check
> exceptions due to SLB errors. These are soft errors and can be fixed by
> flushing the SLBs so the kernel can continue to function
On Thu, 12 Jul 2018 15:41:13 +0200
Michal Suchánek wrote:
> On Tue, 3 Jul 2018 08:08:14 +1000
> "Nicholas Piggin" wrote:
>
> > On Mon, 02 Jul 2018 11:17:06 +0530
> > Mahesh J Salgaonkar wrote:
> >
> > > From: Mahesh Salgaonkar
> > >
> > > On pseries, as of today system crashes if we get
This patch provides support to disable and enable plaform specific
sensor groups like performance, utilization and frequency which are
currently not supported in hwmon.
Signed-off-by: Shilpasri G Bhat
---
This patch is based on
https://git.kernel.org/powerpc/c/04baaf28f40c68c35a413cd9d0db71
66 matches
Mail list logo
