.
Signed-off-by: Serge Semin
---
Changelog v4:
- Initial patch introduction.
---
drivers/edac/dmc520_edac.c | 4 +---
drivers/edac/pasemi_edac.c | 5 +
drivers/edac/ppc4xx_edac.c | 5 +
3 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac
.
Signed-off-by: Serge Semin
---
Changelog v4:
- Initial patch introduction.
---
drivers/edac/dmc520_edac.c | 4 +---
drivers/edac/pasemi_edac.c | 5 +
drivers/edac/ppc4xx_edac.c | 5 +
3 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac
pc18xx: Harmonize EHCI/OHCI DT nodes name
[PATCH RESEND v9 4/5] arm: dts: stih407-family: Harmonize DWC USB3 DT nodes
name
[PATCH RESEND v9 5/5] arm64: dts: apm: Harmonize DWC USB3 DT nodes name
Cc: Krzysztof Kozlowski
Cc: Rob Herring
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-...@vger.
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
On Mon, Nov 13, 2023 at 10:33:00AM +0900, Yoshihiro Shimoda wrote:
> The current code calculated some dbi[2] registers' offset by calling
> dw_pcie_ep_get_dbi[2]_offset() in each function. To improve code
> readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width
> related helpers.
On Mon, Nov 13, 2023 at 10:32:59AM +0900, Yoshihiro Shimoda wrote:
> Since meaning of .func_conf_select is difficult to understand,
> rename it to .get_dbi_offset.
This change looks good. Thanks.
Reviewed-by: Serge Semin
There are redundant initializers will have been left after this
Hi Yoshihiro.
On Mon, Nov 13, 2023 at 10:32:58AM +0900, Yoshihiro Shimoda wrote:
> Since the name of dw_pcie_ep_ops indicates that it's for ep obviously,
> rename a member .ep_init to .init.
Thanks for the series. This change particularly looks good. But since
you are fixing the redundant
.
Signed-off-by: Serge Semin
---
Changelog v4:
- Initial patch introduction.
---
drivers/edac/dmc520_edac.c | 4 +---
drivers/edac/pasemi_edac.c | 5 +
drivers/edac/ppc4xx_edac.c | 5 +
3 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac
Hi Bjorn
On Tue, Dec 06, 2022 at 12:09:56PM -0600, Bjorn Helgaas wrote:
> On Wed, Sep 28, 2022 at 02:03:55PM +0300, Serge Semin wrote:
> > On Wed, Sep 28, 2022 at 06:59:40PM +0800, Zhuo Chen wrote:
> > > There is no need to clear error status during init code, so remove it.
&
On Wed, Sep 28, 2022 at 06:59:37PM +0800, Zhuo Chen wrote:
> Hello.
>
> Here comes patch v3, which contains some fixes and optimizations of
> aer api usage. The v1 and v2 can be found on the mailing list.
>
> v3:
> - Modifications to comments proposed by Sathyanarayanan.
> Remove
>
On Wed, Sep 28, 2022 at 06:59:40PM +0800, Zhuo Chen wrote:
> There is no need to clear error status during init code, so remove it.
Why do you think there isn't? Justify in more details.
-Sergey
>
> Signed-off-by: Zhuo Chen
> ---
> drivers/ntb/hw/idt/ntb_hw_idt.c | 2 --
> 1 file changed, 2
tus().
Have the modification changed since:
https://lore.kernel.org/linux-pci/20220901181634.99591-2-chenzhu...@bytedance.com/
?
AFAICS it hasn't. Then my ab-tag should have been preserved on v2.
One more time:
Acked-by: Serge Semin
Don't forget to add it should you have some more patchset re-spins.
-Sergey
On Mon, Sep 12, 2022 at 01:09:05AM +0800, Zhuo Chen wrote:
>
>
> On 9/12/22 12:22 AM, Serge Semin wrote:
> > Hi Zhuo
> >
> > On Fri, Sep 02, 2022 at 02:16:32AM +0800, Zhuo Chen wrote:
> > > Status bits for ERR_NONFATAL errors only are cleared in
> >
*/
> - pci_aer_clear_nonfatal_status(pdev);
> + else /* Cleanup uncorrectable error status before getting to init */
> + pci_aer_clear_uncorrect_error_status(pdev);
>From the IDT NTB PCIe initialization procedure point of view both of
these methods
On Sun, Jun 26, 2022 at 12:42:48PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 22:45, Serge Semin wrote:
> > On Fri, Jun 24, 2022 at 07:18:57PM +0200, Krzysztof Kozlowski wrote:
> >> On 24/06/2022 16:16, Serge Semin wrote:
> >>> In accordance with the DWC USB3 b
On Fri, Jun 24, 2022 at 03:11:43PM -0700, Vineet Gupta wrote:
>
> On 6/24/22 07:16, Serge Semin wrote:
> > In accordance with the Generic EHCI/OHCI bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the US
On Fri, Jun 24, 2022 at 07:17:53PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 16:16, Serge Semin wrote:
> > In accordance with the DWC USB3 bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB n
On Fri, Jun 24, 2022 at 07:18:57PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 16:16, Serge Semin wrote:
> > In accordance with the DWC USB3 bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB n
On Fri, Jun 24, 2022 at 07:14:44PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 16:16, Serge Semin wrote:
> > In accordance with the Generic EHCI/OHCI bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires
gkai Hu , "linux-arm-ker...@lists.infradead.org"
, Roy Zang , Jingoo Han
, "linuxppc-dev@lists.ozlabs.org"
, Heiko Stuebner ,
"linux-ker...@vger.kernel.org" , Serge Semin
, Krzysztof Kozlowski
, Masami Hiramatsu ,
Pengutronix Kernel Team , Gustavo Pimen
the common driver naming policy. It shall make the driver code more
readable eliminating visual confusion between the local and generic PCI
name spaces.
Signed-off-by: Serge Semin
---
Changelog v4:
- This is a new patch created on the v4 lap of the series.
---
drivers/pci/controller/dwc/pc
c: linux-arm-...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-snps-...@lists.infradead.org
Cc: devicet...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Serge Semin (7):
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmoniz
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
ng maintainers repos.
- Cleanup the list of recipients.
- Rebase onto kernel 5.12-rc4.
Cc: Khuong Dinh
Cc: Patrice Chotard
Cc: Benjamin Herrenschmidt
Cc: Paul Mackerras
Cc: linux-arm-...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-snps-...@
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
On Wed, Feb 10, 2021 at 10:21:47AM -0800, Florian Fainelli wrote:
> On 2/10/21 9:28 AM, Serge Semin wrote:
> > As the subject states this series is an attempt to harmonize the xHCI,
> > EHCI, OHCI and DWC USB3 DT nodes with the DT schema introduced in the
> > framewo
vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Serge Semin (10):
arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Correct DWC USB3 compatible string
arc: dts: Harmonize EHCI/OHCI DT nodes name
arm: dts: lpc18xx: Harmonize EHCI/OHCI DT nodes nam
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
ev@lists.ozlabs.org
Cc: linux-samsung-...@vger.kernel.org
Cc: linux-o...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Serge Semin (10):
arm: dts: ls1021a: Harmonize DWC USB3 DT nodes name
arm: dts: keystone: Correct DWC USB
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
: linux-st...@st-md-mailman.stormreply.com
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-m...@vger.kernel.org
Cc: linux-media...@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-...@vger.kernel.org
Cc: linux-o...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.
as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin
Acked-by: Wan Ahmad Zainie
Reviewed-by: Rob Herring
---
Changelog v5:
- This is a new patch created for the new Intel Keem Bay bindings fil
to be named as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard the "^dwc3@[0-9a-f]+$" nodes from being acceptable as sub-nodes
TI Keystone DWC3 compatible DT node is supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface.
Since DWC USB3 has now got a DT schema describing its DT node, let's make
sure the TI Keystone DWC3 sub-node passes validation against it.
Signed-off-by: Serge
Amlogic G12A USB DT sub-nodes are supposed to be compatible with the
generic DWC USB2 and USB3 devices. Since now we've got DT schemas for
both of the later IP cores let's make sure that the Amlogic G12A USB
DT nodes are fully evaluated including the DWC sub-nodes.
Signed-off-by: Serge Semin
.
Link:
https://lore.kernel.org/linux-usb/20201010224121.12672-16-sergey.se...@baikalelectronics.ru/
Signed-off-by: Serge Semin
Acked-by: Neil Armstrong
Reviewed-by: Rob Herring
Reviewed-by: Martin Blumenstingl
---
Note the same problem is in the DT source file
arch/arm64/boot/dts/amlogic/meson
In accordance with the IP core databook the
snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
Let's make sure the DT schema applies a correct constraints on the
property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/usb/snps
In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin
Reviewed-by: Rob
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
support for both these cases to the DWC USB3 DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s
k-related properties are marked as optional to match the
DWC USB3 driver expectation and to improve the bindings mainainability
so in case if there is a glue-node it would the responsible for the
clocks initialization.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2
opsys,
Inc. is presented with just "snps" vendor prefix.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Drop quotes from around the compat string constant.
Changelog v4:
- Get the patch back, since we can't discard the deprecated prefix from the
driver
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing
in the original bindings file. Add it to the Generic xHCI Controllers DT
schema since the controller driver expects it to be supported.
Signed-off-by: Serge Semin
Acked-by: Florian Fainelli
Reviewed-by: R
,
single interrupts source, and is supposed to optionally contain up to two
reference clocks for the controller core and CSRs.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Add explicit "additionalProperties: true" to the usb-xhci.yaml schema,
since additional
The host controller device might be designed to work for the particular
products or applications. In that case its DT node is supposed to be
equipped with the tpl-support property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/it'/its"
With minor peculiarities (like uploading some vendor-specific firmware)
these are just Generic xHCI controllers fully compatible with its
properties. Make sure the Renesas USB xHCI DT nodes are also validated
against the Generic xHCI DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
d in
the generic USB HCD binding file so it would be validated against the
nodes in which it's specified. Mark the property as deprecated to
discourage the developers from using it.
Signed-off-by: Serge Semin
Acked-by: Martin Blumenstingl
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard '
.org/linux-usb/20201205152427.29537-1-sergey.se...@baikalelectronics.ru
Changelog v6:
- Fix typo in the commit log:
[PATCH v5 19/19] dt-bindings: usb: intel,keembay-dwc3: Validate DWC3 sub-node
Qualcomm sub-node should be called as Intel eem Bay sub-node.
- Fix identations in the "usb-phy&
- for the generic USB Host controllers and the USB
DRD - for the USB Dual-role controllers.
Note the USB DRD schema is supposed to work in conjunction with
the USB peripheral/gadget and USB host controllers DT schemas.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard
There are only four OTG revisions are currently supported by the kernel:
0x0100, 0x0120, 0x0130, 0x0200. Any another value is considered as
invalid.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v4:
- Move the constraints to the usb-drd.yaml schema where the otg-rev
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types
that can be specified in the phy_type HCD property. Add them to the
enumeration of the acceptable values.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/PHY types can be/PHY
an explicit "additionalProperties: true" into the
usb-hcd.yaml as setting the additionalProperties/unevaluateProperties
properties is going to be get mandatory soon.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v4:
- This is a new patch created as a result of the co
Hi Wan,
On Sun, Dec 06, 2020 at 09:56:47AM +, Wan Mohamad, Wan Ahmad Zainie wrote:
> Hi Serge.
>
> > -Original Message-
> > From: Serge Semin
> > Sent: Saturday, December 5, 2020 11:24 PM
> > To: Nyman, Mathias ; Felipe Balbi
> > ; Krzysztof Kozlo
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
ts.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-...@vger.kernel.org
Cc: linux-o...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Serge Semin (10):
arm: dts: keystone: Correct DWC USB3 compatible string
arm64: d
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin
---
Changelog v5:
- This is a new patch created for the new Intel Keem Bay bindings file,
which has been added just recently.
---
.../devicetre
to be named as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard the "^dwc3@[0-9a-f]+$" nodes from being acceptable as sub-nodes
TI Keystone DWC3 compatible DT node is supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface.
Since DWC USB3 has now got a DT schema describing its DT node, let's make
sure the TI Keystone DWC3 sub-node passes validation against it.
Signed-off-by: Serge
Amlogic G12A USB DT sub-nodes are supposed to be compatible with the
generic DWC USB2 and USB3 devices. Since now we've got DT schemas for
both of the later IP cores let's make sure that the Amlogic G12A USB
DT nodes are fully evaluated including the DWC sub-nodes.
Signed-off-by: Serge Semin
.
Link:
https://lore.kernel.org/linux-usb/20201010224121.12672-16-sergey.se...@baikalelectronics.ru/
Signed-off-by: Serge Semin
Acked-by: Neil Armstrong
Reviewed-by: Rob Herring
Reviewed-by: Martin Blumenstingl
---
Note the same problem is in the DT source file
arch/arm64/boot/dts/amlogic/meson
In accordance with the IP core databook the
snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
Let's make sure the DT schema applies a correct constraints on the
property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/usb/snps
With minor peculiarities (like uploading some vendor-specific firmware)
these are just Generic xHCI controllers fully compatible with its
properties. Make sure the Renesas USB xHCI DT nodes are also validated
against the Generic xHCI DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
k-related properties are marked as optional to match the
DWC USB3 driver expectation and to improve the bindings mainainability
so in case if there is a glue-node it would the responsible for the
clocks initialization.
Signed-off-by: Serge Semin
---
Changelog v2:
- Discard '|' from the descriptions,
opsys,
Inc. is presented with just "snps" vendor prefix.
Signed-off-by: Serge Semin
---
Changelog v2:
- Drop quotes from around the compat string constant.
Changelog v4:
- Get the patch back, since we can't discard the deprecated prefix from the
driver.
---
Documentation/devicetree/bi
In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin
Reviewed-by: Rob
,
single interrupts source, and is supposed to optionally contain up to two
reference clocks for the controller core and CSRs.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Add explicit "additionalProperties: true" to the usb-xhci.yaml schema,
since additional
The host controller device might be designed to work for the particular
products or applications. In that case its DT node is supposed to be
equipped with the tpl-support property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/it'/its"
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
support for both these cases to the DWC USB3 DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing
in the original bindings file. Add it to the Generic xHCI Controllers DT
schema since the controller driver expects it to be supported.
Signed-off-by: Serge Semin
Acked-by: Florian Fainelli
Reviewed-by: R
d in
the generic USB HCD binding file so it would be validated against the
nodes in which it's specified. Mark the property as deprecated to
discourage the developers from using it.
Signed-off-by: Serge Semin
Acked-by: Martin Blumenstingl
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard '
Aside from the UTMI+ there are also ULPI, Serial and HSIC PHY types
that can be specified in the phy_type HCD property. Add them to the
enumeration of the acceptable values.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/PHY types can be/PHY
ot; from the usb-hcd.yaml schema.
- Make sure dr_mode exist in DW USB3 node to apply the USB-gadget-only schema.
- Add a new patch:
[PATCH v5 19/19] dt-bindings: usb: intel,keembay-dwc3: Validate DWC3 sub-node
since the Intel Keem Bay DWC3 bindings has been just added.
Signed-off-by: Serge
There are only four OTG revisions are currently supported by the kernel:
0x0100, 0x0120, 0x0130, 0x0200. Any another value is considered as
invalid.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v4:
- Move the constraints to the usb-drd.yaml schema where the otg-rev
- for the generic USB Host controllers and the USB
DRD - for the USB Dual-role controllers.
Note the USB DRD schema is supposed to work in conjunction with
the USB peripheral/gadget and USB host controllers DT schemas.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard
an explicit "additionalProperties: true" into the
usb-hcd.yaml as setting the additionalProperties/unevaluateProperties
properties is going to be get mandatory soon.
Signed-off-by: Serge Semin
---
Changelog v4:
- This is a new patch created as a result of the comment left
by Chunfeng
On Sat, Nov 21, 2020 at 06:42:28AM -0600, Rob Herring wrote:
> On Thu, Nov 12, 2020 at 01:29:46PM +0300, Serge Semin wrote:
> > On Wed, Nov 11, 2020 at 02:14:23PM -0600, Rob Herring wrote:
> > > On Wed, Nov 11, 2020 at 12:08:45PM +0300, Serge Semin wrote:
> > > >
On Wed, Nov 11, 2020 at 02:14:23PM -0600, Rob Herring wrote:
> On Wed, Nov 11, 2020 at 12:08:45PM +0300, Serge Semin wrote:
> > DWC USB3 DT node is supposed to be compliant with the Generic xHCI
> > Controller schema, but with additional vendor-specific properties, the
> >
On Wed, Nov 11, 2020 at 01:16:40PM -0600, Rob Herring wrote:
> On Wed, 11 Nov 2020 12:08:36 +0300, Serge Semin wrote:
> > There can be three distinctive types of the USB controllers: USB hosts,
> > USB peripherals/gadgets and USB OTG, which can switch from one role to
> > anot
On Wed, Nov 11, 2020 at 10:34:10AM +0100, Krzysztof Kozlowski wrote:
> On Wed, 11 Nov 2020 at 10:32, Serge Semin
> wrote:
> >
> > On Wed, Nov 11, 2020 at 10:16:28AM +0100, Krzysztof Kozlowski wrote:
> > > On Wed, Nov 11, 2020 at 12:08:45PM +0300, Serge Semin wrot
On Wed, Nov 11, 2020 at 10:16:28AM +0100, Krzysztof Kozlowski wrote:
> On Wed, Nov 11, 2020 at 12:08:45PM +0300, Serge Semin wrote:
> > DWC USB3 DT node is supposed to be compliant with the Generic xHCI
> > Controller schema, but with additional vendor-specific properties, the
ic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin
Acked-by: Krzysztof Kozlowski
---
arch/powerpc/boot/dts/akebono.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/dts/akebono.dts
b/arch/powerpc/boot/dts/akebono.dts
index df1
dead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-samsung-...@vger.kernel.org
Cc: linux-o...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
Serge Semin (18):
arm: dts: keystone: Correct DWC USB3 compatible string
arm64: d
to be named as generic
USB HCD ("^usb(@.*)?") one we have to accordingly fix the sub-nodes name
regexp and fix the DT node example.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard the "^dwc3@[0-9a-f]+$" nodes from being acceptable as sub-nodes
TI Keystone DWC3 compatible DT node is supposed to have a DWC USB3
compatible sub-node to describe a fully functioning USB interface.
Since DWC USB3 has now got a DT schema describing its DT node, let's make
sure the TI Keystone DWC3 sub-node passes validation against it.
Signed-off-by: Serge
Amlogic G12A USB DT sub-nodes are supposed to be compatible with the
generic DWC USB2 and USB3 devices. Since now we've got DT schemas for
both of the later IP cores let's make sure that the Amlogic G12A USB
DT nodes are fully evaluated including the DWC sub-nodes.
Signed-off-by: Serge Semin
.
Link:
https://lore.kernel.org/linux-usb/20201010224121.12672-16-sergey.se...@baikalelectronics.ru/
Signed-off-by: Serge Semin
Acked-by: Neil Armstrong
Reviewed-by: Rob Herring
Reviewed-by: Martin Blumenstingl
---
Note the same problem is in the DT source file
arch/arm64/boot/dts/amlogic/meson
opsys,
Inc. is presented with just "snps" vendor prefix.
Signed-off-by: Serge Semin
---
Changelog v2:
- Drop quotes from around the compat string constant.
Changelog v4:
- Get the patch back, since we can't discard the deprecated prefix from the
driver.
---
Documentation/devicetree/bi
In accordance with the driver comments the PIPE3 de-emphasis can be tuned
to be either -6dB, -2.5dB or disabled. Let's add the de-emphasis
property constraints so the DT schema would make sure the controller DT
node is equipped with correct value.
Signed-off-by: Serge Semin
Reviewed-by: Rob
the DWC USB3 nodes are also validated against the
usb-xhci.yaml schema.
Note we have to discard the nodename restriction of being prefixed with
"dwc3@" string, since in accordance with the usb-hcd.yaml schema USB nodes
are supposed to be named as "^usb(@.*)".
Signed-off-by: Serge Se
In accordance with the IP core databook the
snps,quirk-frame-length-adjustment property can be set within [0, 0x3F].
Let's make sure the DT schema applies a correct constraints on the
property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Documentation/devicetree/bindings/usb/snps
With minor peculiarities (like uploading some vendor-specific firmware)
these are just Generic xHCI controllers fully compatible with its
properties. Make sure the Renesas USB xHCI DT nodes are also validated
against the Generic xHCI DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
,
single interrupts source, and is supposed to optionally contain up to two
reference clocks for the controller core and CSRs.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Add explicit "additionalProperties: true" to the usb-xhci.yaml schema,
since additional
For some reason the "brcm,xhci-brcm-v2" compatible string has been missing
in the original bindings file. Add it to the Generic xHCI Controllers DT
schema since the controller driver expects it to be supported.
Signed-off-by: Serge Semin
Acked-by: Florian Fainelli
Reviewed-by: R
The controller driver supports two types of DWC USB3 devices: with a
common interrupt lane and with individual interrupts for each mode. Add
support for both these cases to the DWC USB3 DT schema.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s
- for the generic USB Host controllers and the USB
DRD - for the USB Dual-role controllers.
Note the USB DRD schema is supposed to work in conjunction with
the USB peripheral/gadget and USB host controllers DT schemas.
Signed-off-by: Serge Semin
---
Changelog v2:
- Discard '|' in all the new properties
d in
the generic USB HCD binding file so it would be validated against the
nodes in which it's specified. Mark the property as deprecated to
discourage the developers from using it.
Signed-off-by: Serge Semin
Acked-by: Martin Blumenstingl
Reviewed-by: Rob Herring
---
Changelog v2:
- Discard '
There are only four OTG revisions are currently supported by the kernel:
0x0100, 0x0120, 0x0130, 0x0200. Any another value is considered as
invalid.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v4:
- Move the constraints to the usb-drd.yaml schema where the otg-rev
The host controller device might be designed to work for the particular
products or applications. In that case its DT node is supposed to be
equipped with the tpl-support property.
Signed-off-by: Serge Semin
Reviewed-by: Rob Herring
---
Changelog v2:
- Grammar fix: "s/it'/its"
an explicit "additionalProperties: true" into the
usb-hcd.yaml as setting the additionalProperties/unevaluateProperties
properties is going to be get mandatory soon.
Signed-off-by: Serge Semin
---
Changelog v4:
- This is a new patch created as a result of the comment left
by Chunfeng
ription.
- Split the generic USB controller properties into three schemas: Generic USB
controllers, USB Host controllers and USB OTG controllers.
Signed-off-by: Serge Semin
Cc: Alexey Malahov
Cc: Pavel Parkhomenko
Cc: Andy Gross
Cc: Bjorn Andersson
Cc: Manu Gautam
Cc: Roger Quadros
Cc: Lad Pra
1 - 100 of 158 matches
Mail list logo