rmware";
reg = ; /* 256K */
read-only;
};
d...@c {
label = "DTB";
reg = ; /* 256K */
read-only;
};
ker...@10 {
label = "Kernel";
reg = ; /* 4M */
read-only;
};
f...@50 {
label = "Root File System";
reg = ; /* 8M */
};
u...@d0 {
label = "User&quo
my response inlined..
On Tue, 19 Jan 2010 22:41:25 +0530 wrote
>nanda wrote:
>
> We had merged the 2.6.24
That's pretty old...
>> We were using 2.6.24 as this kernel version this is the references used by
>> us for MPC8321E.
> with the FSL based NAND driver,
hould we need to configure the PIN
par_io_config_pin() for configuration of the PORT C with 15th PIN and set the
data value using par_io_data_set() (specified
arch/powerpc/sysdev/qe_lib/qe_io.c)
Please let me know any input on the above issue.
Tha
Hi,
Iam looking for any references for the dts (device tree source) file which
implements freescale's UPM based NAND driver connected to NAND flash. (it uses
the individual gpio connected to R/B pin)
Thanks in advance.
Regards,
Nanda___
Linuxppc-d
Hi,
I am looking for freescale NAND driver in the kernel 2.6.24 (which implement
UPM based technique). Can anyone point us the patch which is available for the
same?
Thanks & Regards,
Nanda
___
Linuxppc-dev mailing list
Linuxppc
Hi,
Iam getting the below crash on new board tested on MPC832x using
linux-2.6.24, please let me what could be the problem on the same. Does it
infer any information on the exception?
# Oops: Exception in kernel mode, sig: 4 [#1]
PREEMPT MPC832x RDB
Modules linked in:
NIP: c0048178 LR: c00463e
. The MPC 8360 board keeps
rebooting after downloading the image Power PC Kernel Image(uImage) and Power
PC RAMDisk Image(rootfs.ext2.gz.uboot) build by the
"ltib" Please clarrify on the same.Thanks in
advance.Regards,Nanda On Thu, 20 Nov 2008 18:40:36 Stuart
Hughes wroteHi
nfig, which is the file copied from
/home/nanda/linux2.6.2
0.6/arch/powerpc/configs/mpc8360emds_defconfig to the
ltib/config/platform/mpc8360epb directory) - Linux Target Architecture as
"powerpc"After the above process by saving the configuration (it started
building kernel and generat
configs- Tool chain as (gcc-3.4.3/glibc-2.3.3)- uboot 1.1.3- "Kernel (local
linux directory build)" which refers to the local directory where
linux-2.6.20.6 is placed- "Kernel config file"specified as
mpc8360emds_defconfig, which is the file copied from
/home/nanda/linux2
advance.Regards,Nanda ___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
10 matches
Mail list logo