The following series implements basic board support for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D.
This series provides basic functionality: - The board can boot with a serial console. - Ethernet works, though the phys are polled. - The PCI bus is scanned and sata functions. Signed-off-by: Martyn Welch <[EMAIL PROTECTED]> --- Kumar & Scott: Thanks again for your comments. I have: - Removed all of the "device_type" entries I believe I can - Moved the default config to new directory "arch/powerpc/configs/86xx/" - "mac-address" changed to "local-mac-address" - Removed un-needed #add/size and other defunct entries - Use common interrupt routine. Martyn Martyn Welch (2): powerpc: Default configuration for GE Fanuc SBC610 powerpc: Board support for GE Fanuc SBC610 arch/powerpc/boot/dts/gef_sbc610.dts | 268 +++++ arch/powerpc/configs/gef_sbc610_defconfig | 1654 +++++++++++++++++++++++++++++ arch/powerpc/platforms/86xx/Kconfig | 9 arch/powerpc/platforms/86xx/Makefile | 1 arch/powerpc/platforms/86xx/gef_sbc610.c | 187 +++ 5 files changed, 2118 insertions(+), 1 deletions(-) create mode 100644 arch/powerpc/boot/dts/gef_sbc610.dts create mode 100644 arch/powerpc/configs/gef_sbc610_defconfig create mode 100644 arch/powerpc/platforms/86xx/gef_sbc610.c _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev