board: Acube Sam460ex (canyonlands based) boot process hang down with linux-3.1.10 and 3.2.4 [1] instead with linux-3.0.19 still boot but with a weird Oops [2]
[1] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2073520k/2097152k available (6024k kernel code, 23632k reserved, 168k data, 125k bss, 196k init) Kernel virtual memory layout: * 0xfffcf000..0xfffff000 : fixmap * 0xffc00000..0xffe00000 : highmem PTEs * 0xffa00000..0xffc00000 : consistent mem * 0xffa00000..0xffa00000 : early ioremap * 0xf1000000..0xffa00000 : vmalloc & ioremap SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:512 nr_irqs:512 16 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 UIC3 (32 IRQ sources) at DCR 0xf0 clocksource: timebase mult[36db6e] shift[22] registered Console: colour dummy device 80x25 console [tty0] enabled pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 devtmpfs: initialized NET: Registered protocol family 16 256k L2-cache enabled PCIE0: Port disabled via device-tree PCIE1: Checking link... PCIE1: No device detected. PCI host bridge /plb/pciex@d20000000 (primary) ranges: MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 Removing ISA hole at 0x0000000f00100000 4xx PCI DMA offset set to 0x00000000 /plb/pciex@d20000000: Legacy ISA memory support enabled PCIE1: successfully set as root-complex PCI host bridge /plb/pci@c0ec00000 (primary) ranges: MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 Removing ISA hole at 0x0000000c0ee00000 4xx PCI DMA offset set to 0x00000000 /plb/pci@c0ec00000: Legacy ISA memory support enabled PCI: Probing PCI hardware PCI: Hiding 4xx host bridge resources 0000:80:00.0 pci 0000:80:00.0: PCI bridge to [bus 81-bf] pci 0000:80:00.0: PCI bridge to [bus 81-bf] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff] pci 0001:00:06.0: BAR 0: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff]) pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff] pci 0001:00:06.0: BAR 1: set to [mem 0xd84000000-0xd841fffff] (PCI address [0x84000000-0x841fffff]) bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timebase Switched to NOHz mode on CPU #0 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Could not remap bcsr setting trigger mode 3 for irq 43 failed (uic_set_irq_type+0x0/0x164) setting trigger mode 3 for irq 43 failed (uic_set_irq_type+0x0/0x164) highmem bounce pool size: 64 pages JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled Btrfs loaded msgmni has been set to 1489 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550 Generic non-volatile memory driver v1.1 brd: module loaded loop: module loaded sm501 0001:00:06.0: SM501 At f5480000: Version 050100c0, 64 Mb, IRQ 19 sm501 0001:00:06.0: setting M1XCLK to 144000000 sm501 0001:00:06.0: setting MCLK to 72000000 serial8250.10: ttyS2 at MMIO 0xd84030000 (irq = 19) is a ST16654 serial8250.10: ttyS3 at MMIO 0xd84030020 (irq = 19) is a ST16654 sm501-fb sm501-fb.80: fb sm501fb-crt disabled at start sm501-fb sm501-fb.80: using mode specified in @mode Console: switching to colour frame buffer device 100x37 sm501-fb sm501-fb.80: fb0: sm501fb-crt frame buffer sm501-fb sm501-fb.80: fb sm501fb-panel enabled at start sm501-fb sm501-fb.80: using mode specified in @mode sm501-fb sm501-fb.80: fb1: sm501fb-panel frame buffer sata-dwc 4bffd1000.sata: id 0, controller version 1.82 sata-dwc 4bffd1000.sata: DMA initialized scsi0 : sata-dwc ata1: SATA max UDMA/133 irq 34 PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels ZMII /plb/opb/emac-zmii@ef600d00 initialized RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support TAH /plb/opb/emac-tah@ef601350 initialized TAH /plb/opb/emac-tah@ef601450 initialized /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d4:89 eth0: found Generic MII PHY (0x00) /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00 eth1: found Generic MII PHY (0x01) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ppc-of-ehci 4bffd0400.ehci: OF EHCI ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1 ppc-of-ehci 4bffd0400.ehci: irq 27, io mem 0x4bffd0400 ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OF EHCI usb usb1: Manufacturer: Linux 3.1.10 ehci_hcd usb usb1: SerialNumber: PPC-OF USB hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver ibm-iic 4ef600700.i2c: using standard (100 kHz) mode rtc-m41t80 0-0068: chip found, driver version 0.05 rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 ibm-iic 4ef600800.i2c: using standard (100 kHz) mode booke_wdt: powerpc book-e watchdog driver loaded device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-de...@redhat.com usbcore: registered new interface driver ushc usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Registering the dns_resolver key type rtc-m41t80 0-0068: setting system clock to 2012-02-04 14:15:15 UTC (1328364915) usb 1-1: new high speed USB device number 2 using ppc-of-ehci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off usb 1-1: New USB device found, idVendor=0424, idProduct=2517 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA hub 1-1:1.0: USB hub found hub 1-1:1.0: 7 ports detected sda: RDSK (512) sda1 (LNX^@)(res 2 spb 1) sda2 (LNX^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1) sda4 (LNX^@)(res 2 spb 1) sd 0:0:0:0: [sda] Attached SCSI disk REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode reiserfs: using flush barriers REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:3. devtmpfs: mounted Freeing unused kernel memory: 196k freed usb 1-1.1: new low speed USB device number 3 using ppc-of-ehci usb 1-1.1: New USB device found, idVendor=062a, idProduct=0102 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1: Product: Wireless Keyboard & Mouse usb 1-1.1: Manufacturer: MOSART Semi. input: MOSART Semi. Wireless Keyboard & Mouse as /devices/plb.0/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input0 generic-usb 0003:062A:0102.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-PPC-OF USB-1.1/input0 input: MOSART Semi. Wireless Keyboard & Mouse as /devices/plb.0/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1:1.1/input/input1 INIT: generic-usb 0003:062A:0102.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-PPC-OF USB-1.1/input1 version 2.88 booting usb 1-1.7: new high speed USB device number 4 using ppc-of-ehci The system is coming up. Please wait. usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240 usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.7: Product: Ultra Fast Media usb 1-1.7: Manufacturer: Generic usb 1-1.7: SerialNumber: 000000225001 scsi1 : usb-storage 1-1.7:1.0 udevd[55]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev' udevd[56]: starting version 175 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ppc-of-ohci 4bffd0000.usb: OF OHCI ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2 ppc-of-ohci 4bffd0000.usb: irq 28, io mem 0x4bffd0000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OF OHCI usb usb2: Manufacturer: Linux 3.1.10 ohci_hcd usb usb2: SerialNumber: PPC-OF USB scsi 1:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.68 PQ: 0 ANSI: 0 sd 1:0:0:0: [sdb] Attached SCSI removable disk sd 1:0:0:0: Attached scsi generic sg1 type 0 ad7414 0-0048: chip found hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected sm501-usb sm501-usb.80: cannot declare coherent memory [2] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192 Kernel command line: root=/dev/sda3 ro video=800x600 udbg-immortal console=tty0 console=ttyS0,115200 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) High memory: 1310720k Memory: 2073496k/2097152k available (6048k kernel code, 23656k reserved, 168k data, 125k bss, 196k init) Kernel virtual memory layout: * 0xfffcf000..0xfffff000 : fixmap * 0xffc00000..0xffe00000 : highmem PTEs * 0xffa00000..0xffc00000 : consistent mem * 0xffa00000..0xffa00000 : early ioremap * 0xf1000000..0xffa00000 : vmalloc & ioremap SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:512 nr_irqs:512 16 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 irq: irq 30 on host /interrupt-controller0 mapped to virtual irq 30 UIC2 (32 IRQ sources) at DCR 0xe0 irq: irq 10 on host /interrupt-controller0 mapped to virtual irq 16 UIC3 (32 IRQ sources) at DCR 0xf0 irq: irq 16 on host /interrupt-controller0 mapped to virtual irq 17 time_init: decrementer frequency = 1166.666663 MHz time_init: processor frequency = 1166.666663 MHz clocksource: timebase mult[36db6e] shift[22] registered clockevent: decrementer mult[9555554d] shift[31] cpu[0] Console: colour dummy device 80x25 console [tty0] enabled pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 devtmpfs: initialized NET: Registered protocol family 16 irq: irq 11 on host /interrupt-controller1 mapped to virtual irq 18 256k L2-cache enabled PCIE0: Port disabled via device-tree PCIE1: Checking link... PCIE1: No device detected. PCI host bridge /plb/pciex@d20000000 (primary) ranges: MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000 MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000 IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000 Removing ISA hole at 0x0000000f00100000 4xx PCI DMA offset set to 0x00000000 /plb/pciex@d20000000: Legacy ISA memory support enabled PCIE1: successfully set as root-complex PCI host bridge /plb/pci@c0ec00000 (primary) ranges: MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000 MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000 IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000 Removing ISA hole at 0x0000000c0ee00000 4xx PCI DMA offset set to 0x00000000 /plb/pci@c0ec00000: Legacy ISA memory support enabled PCI: Probing PCI hardware pci 0000:80:00.0: [aaa1:bed1] type 1 class 0x000604 pci 0000:80:00.0: reg 10: [mem 0x00000000-0x7fffffff pref] PCI: Hiding 4xx host bridge resources 0000:80:00.0 pci 0000:80:00.0: PCI bridge to [bus 81-bf] pci 0000:80:00.0: bridge window [io 0x0000-0x0000] (disabled) pci 0000:80:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled) pci 0000:80:00.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled) pci 0001:00:06.0: [126f:0501] type 0 class 0x000380 pci 0001:00:06.0: reg 10: [mem 0x80000000-0x83ffffff] pci 0001:00:06.0: reg 14: [mem 0x84000000-0x841fffff] pci 0001:00:06.0: supports D1 D2 irq: irq 0 on host /interrupt-controller1 mapped to virtual irq 19 PCI: max bus depth: 1 pci_try_num: 2 pci 0000:80:00.0: PCI bridge to [bus 81-bf] pci 0000:80:00.0: bridge window [io disabled] pci 0000:80:00.0: bridge window [mem disabled] pci 0000:80:00.0: bridge window [mem pref disabled] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff] pci 0001:00:06.0: BAR 0: set to [mem 0xd80000000-0xd83ffffff] (PCI address [0x80000000-0x83ffffff]) pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff] pci 0001:00:06.0: BAR 1: set to [mem 0xd84000000-0xd841fffff] (PCI address [0x84000000-0x841fffff]) pci_bus 0000:80: resource 0 [io 0xfffe0000-0xfffeffff] pci_bus 0000:80: resource 1 [mem 0xe80000000-0xeffffffff] pci_bus 0001:00: resource 0 [io 0x0000-0xffff] pci_bus 0001:00: resource 1 [mem 0xd80000000-0xdffffffff] bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timebase Switched to NOHz mode on CPU #0 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 32 irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 20 irq: irq 1 on host /interrupt-controller0 mapped to virtual irq 21 Could not remap bcsr irq: irq 29 on host /interrupt-controller0 mapped to virtual irq 29 irq: irq 6 on host /interrupt-controller2 mapped to virtual irq 22 irq: irq 7 on host /interrupt-controller2 mapped to virtual irq 23 irq: irq 3 on host /interrupt-controller2 mapped to virtual irq 24 irq: irq 4 on host /interrupt-controller2 mapped to virtual irq 25 irq: irq 5 on host /interrupt-controller2 mapped to virtual irq 26 irq: irq 29 on host /interrupt-controller2 mapped to virtual irq 27 irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 28 irq: irq 28 on host /interrupt-controller2 mapped to virtual irq 31 irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 32 irq: irq 12 on host /interrupt-controller0 mapped to virtual irq 33 irq: irq 0 on host /interrupt-controller3 mapped to virtual irq 34 irq: irq 5 on host /interrupt-controller3 mapped to virtual irq 35 irq: irq 6 on host /interrupt-controller1 mapped to virtual irq 36 irq: irq 2 on host /interrupt-controller0 mapped to virtual irq 37 irq: irq 3 on host /interrupt-controller0 mapped to virtual irq 38 irq: irq 16 on host /interrupt-controller2 mapped to virtual irq 39 irq: irq 20 on host /interrupt-controller2 mapped to virtual irq 40 irq: irq 17 on host /interrupt-controller2 mapped to virtual irq 41 irq: irq 21 on host /interrupt-controller2 mapped to virtual irq 42 irq: irq 2 on host /interrupt-controller3 mapped to virtual irq 43 setting trigger mode 3 for irq 43 failed (uic_set_irq_type+0x0/0x164) setting trigger mode 3 for irq 43 failed (uic_set_irq_type+0x0/0x164) highmem bounce pool size: 64 pages JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled Btrfs loaded msgmni has been set to 1489 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a U6_16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a U6_16550A 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 20) is a 16550 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 21) is a 16550 Generic non-volatile memory driver v1.1 brd: module loaded loop: module loaded sm501 0001:00:06.0: SM501 At f5480000: Version 050100c0, 64 Mb, IRQ 19 sm501 0001:00:06.0: setting M1XCLK to 144000000 sm501 0001:00:06.0: setting MCLK to 72000000 sm501-usb[0] [mem 0xd84040000-0xd8405ffff] sm501-usb[1] [mem 0xd83fc0000-0xd83ffffff] sm501-usb[2] [irq 19] serial8250.10: ttyS2 at MMIO 0xd84030000 (irq = 19) is a ST16654 serial8250.10: ttyS3 at MMIO 0xd84030020 (irq = 19) is a ST16654 sm501-fb[0] [mem 0xd84080000-0xd8408ffff] sm501-fb[1] [mem 0xd84100000-0xd8414ffff] sm501-fb[2] [mem 0xd80000000-0xd83fbffff] sm501-fb[3] [irq 19] sm501-fb sm501-fb.80: fb sm501fb-crt disabled at start sm501-fb sm501-fb.80: using mode specified in @mode Console: switching to colour frame buffer device 100x37 sm501-fb sm501-fb.80: fb0: sm501fb-crt frame buffer sm501-fb sm501-fb.80: fb sm501fb-panel enabled at start sm501-fb sm501-fb.80: using mode specified in @mode sm501-fb sm501-fb.80: fb1: sm501fb-panel frame buffer sata-dwc 4bffd1000.sata: id 0, controller version 1.82 sata-dwc 4bffd1000.sata: DMA initialized scsi0 : sata-dwc ata1: SATA max UDMA/133 irq 34 PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels ZMII /plb/opb/emac-zmii@ef600d00 initialized RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support TAH /plb/opb/emac-tah@ef601350 initialized TAH /plb/opb/emac-tah@ef601450 initialized /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d4:89 eth0: found Generic MII PHY (0x00) /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00 eth1: found Generic MII PHY (0x01) usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ppc-of-ehci 4bffd0400.ehci: OF EHCI ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1 ppc-of-ehci 4bffd0400.ehci: irq 27, io mem 0x4bffd0400 ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OF EHCI usb usb1: Manufacturer: Linux 3.0.19 ehci_hcd usb usb1: SerialNumber: PPC-OF USB hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver ibm-iic 4ef600700.i2c: using standard (100 kHz) mode irq: irq 25 on host /interrupt-controller2 mapped to virtual irq 44 rtc-m41t80 0-0068: chip found, driver version 0.05 rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 irq: irq 20 on host /interrupt-controller1 mapped to virtual irq 45 ibm-iic 4ef600800.i2c: using standard (100 kHz) mode booke_wdt: powerpc book-e watchdog driver loaded device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-de...@redhat.com usbcore: registered new interface driver ushc usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Registering the dns_resolver key type rtc-m41t80 0-0068: setting system clock to 2012-02-04 16:53:29 UTC (1328374409) usb 1-1: new high speed USB device number 2 using ppc-of-ehci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 1-1: New USB device found, idVendor=0424, idProduct=2517 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 1-1:1.0: USB hub found sda: RDSK (512) sda1 (LNX^@)(res 2 spb 1) sda2 (LNX^@)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1) sda4 (LNX^@)(res 2 spb 1) hub 1-1:1.0: 7 ports detected sd 0:0:0:0: [sda] Attached SCSI disk REISERFS (device sda3): found reiserfs format "3.6" with standard journal REISERFS (device sda3): using ordered data mode REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda3): checking transaction log (sda3) REISERFS (device sda3): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:3. devtmpfs: mounted Freeing unused kernel memory: 196k init usb 1-1.1: new low speed USB device number 3 using ppc-of-ehci usb 1-1.1: New USB device found, idVendor=062a, idProduct=0102 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1: Product: Wireless Keyboard & Mouse usb 1-1.1: Manufacturer: MOSART Semi. input: MOSART Semi. Wireless Keyboard & Mouse as /devices/plb.0/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1:1.0/input/input0 generic-usb 0003:062A:0102.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-PPC-OF USB-1.1/input0 input: MOSART Semi. Wireless Keyboard & Mouse as /devices/plb.0/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1:1.1/input/input1 generic-usb 0003:062A:0102.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-PPC-OF USB-1.1/input1 usb 1-1.7: new high speed USB device number 4 using ppc-of-ehci usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240 usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.7: Product: Ultra Fast Media usb 1-1.7: Manufacturer: Generic usb 1-1.7: SerialNumber: 000000225001 scsi1 : usb-storage 1-1.7:1.0 udevd[55]: starting version 175 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver sm501-usb sm501-usb.80: cannot declare coherent memory Unable to handle kernel paging request for data at address 0xf543bfb4 Faulting instruction address: 0xc00003f0 Oops: Kernel access of bad area, sig: 11 [#1] Canyonlands Modules linked in: ohci_hcd(+) NIP: c00003f0 LR: c000bd58 CTR: f54710cc REGS: f543bf1c TRAP: 0300 Not tainted (3.0.19) MSR: 00021000 <ME,CE> CR: 24004422 XER: 00000001 DEAR: f543bfb4, ESR: 00800000 TASK = ef102d60[77] 'modprobe' THREAD: ef172000 GPR00: c000bd58 ef102f30 ef102d60 f547101c 838bfff0 00000000 c02d276c ef221000 GPR08: 00002284 c000bf58 24004422 f543bf0c ef102f30 10024440 1000ba68 00000000 GPR16: 1000ba44 bfcbe4a4 00000000 1000ba58 00000000 1061f354 00000a60 00000000 GPR24: c004ca18 00000124 00000022 82cbffd8 82ebffdc 830bffe0 832bffe4 834bffe8 NIP [c00003f0] DataStorage+0x30/0xc0 LR [c000bd58] handle_page_fault+0xc/0x80 Call Trace: Instruction dump: 7d5043a6 7d7143a6 7c3443a6 7d400026 7d7b02a6 716b4000 41820010 7c3342a6 8021fe34 38212000 3821ff40 7c2b0b78 <914b00a8> 918b0040 912b0034 7d5042a6 ---[ end trace 8b79cce2f3ca8696 ]--- scsi 1:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.68 PQ: 0 ANSI: 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Attached SCSI removable disk ad7414 0-0048: chip found ad7414 0-0048: ad7414_probe unable to read config register. REISERFS (device sda4): found reiserfs format "3.6" with standard journal REISERFS (device sda4): using ordered data mode REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda4): checking transaction log (sda4) REISERFS (device sda4): Using r5 hash to sort names Adding 626528k swap on /dev/sda2. Priority:-1 extents:1 across:626528k eth0: link is up, 100 FDX, pause enabled ata1.00: configured for UDMA/133 ata1: EH complete eth0: no IPv6 routers present -- acrux <ac...@cruxppc.org> _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev