Gabriel Paubert writes:
> On 16 Jun 2000, Michael Lundkvist wrote:
>
> >
> > I've gotten my hands on a Ramix PMC 233 harddisk and now I would like
> > to use it under Linux on a MVME 2400. Has anyone done this? Are there
> > any drivers available?
> >
> > http://www.ramix.com/products/storage/pm
I hate replying to myself, but if you work for a hardware or software
vendor that would like a link from these pages, let your company know.
What I'm currently looking for is a logo (preferably jpeg), a small blurb
on what the company does. (Remember all of this should be relative to
Linux/PPC.)
As some of you are aware, the LinuxPPC.org site is being redone. I have
convinced them that an embedded section is needed. They agreed. And now
I have the responsibility to fill it and maintain it.
Currently I am thinking of having a FAQ section, Processor Compatability
list, Hardware manufact
On 16 Jun 2000, Michael Lundkvist wrote:
>
> I've gotten my hands on a Ramix PMC 233 harddisk and now I would like
> to use it under Linux on a MVME 2400. Has anyone done this? Are there
> any drivers available?
>
> http://www.ramix.com/products/storage/pmc233.html
Doesn't it look like a standa
I am about to port Linux to the other processors on our board. At
present I have Linux running fine on CPU A. The main difficulty is
that the other processors do not have any RAM of their own at
physical address 0. The memory layout of this board is:
- 03FF CPU A (200 MHz
Murray,
Were you ever able to resolve your problems? We are getting kernel mode
software emulation kernel panics in some of the routines that you mention
here on a custom MPC823 board using the 2.2.13 tarball with FPU emulation
and MM patches.
Lucinda Schafer
Staff Software Engineer
Adaptive Mic
Are you using a standard or custom board? Our MPC823-based custom board
crashes occasionally on a page fault or other memory management related
routine. We always get the kernel mode FPU software emulation panic. It
seems that you are experiencing the same problem as we are.
It is interesting tha
I use it on an NT machine with SP6 (or is it SP5?).
I do not use the latest version. According to Mot
tech support, version 1.5 is the one to use on NT.
Mark
--
Mark Clayton mclayton at netplane.com
NetPlane Systems Inc http://www.netplane.com
888 Washington S
Hi John & Dan,
See Below for comments
>Subject: Re: SCC used for WAN connection
>
>
>john zhan wrote:
>
>> me too. in fact, also, I need generic x.25 running on it.
>
>So, write it.
>
>
>>
>> >What is needed is a new version of 8xx_io/uart.c that
>sets up and drives
>
>No, what you
Has anyone got the mpc8bug software to work on the Windows NT(I have service
pack 6.0 installed) or Windows 98? I keep getting application errors when I
run the software.
Navin
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
10 matches
Mail list logo
