search for LCD pannel (1x16 or 2x16)

In message <3D918070.10009 at thales-bm.com> you wrote: > > I'm searching for a LCD panel ( about 1x16 or 2x16 characters, black and > white only ) that my MPC8260 could use . Most display of this sort come with some sort of serial interface. > Is there some support for them in the linux kernel

Character LCD

Hello, I had an experience work with : MSC-C162DGLY-1N (character) MG-240128-1 (graphic) but only via parallel port x86 MS-DOS and Linux 2.0.xx. It was easy and stable. About hardware at: http://www.truly.de/datasheet/character.asp Best wishes Sergiy ** Sent via the linuxppc-embedded

Cisco 26xx routers ??

Hi Folks: I was browsing some emails on the list and read an email from Iain Young related with the use of Linuxppc for the Cisco 2600's series routers.. Does anybody has success doing that ?? All comments or suggestions are very welcome... Best Regards,

ppcboot on rpxlite_dw mpc850

The RPXlite_config in ppcboot is for the Embedded Planet LITE CW not the DW. The CW is high boot and has DRAM, the DW is low boot and has SDRAM. -Original Message- From: Patrick Mahoney [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 25, 2002 2:49 PM To: ppcboot-users at lists.sour

ppcboot on rpxlite_dw mpc850

Hello lists, Apologies for the crosspost. I believe both lists are concerned. Regarding my problem, i searched the archives and did not find any relevant information. Yet, i am new to this project, so there might be some elementary stuff i am not aware of... I have an RPXlite_dw board from Embe

higher uart baud rate corrupts image..

An embedded and charset-unspecified text was scrubbed... Name: not available Url: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20020925/92570820/attachment.txt

IDE disk size

An embedded and charset-unspecified text was scrubbed... Name: not available Url: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20020925/01514e28/attachment.txt

search for LCD pannel (1x16 or 2x16)

hi all ! I'm searching for a LCD panel ( about 1x16 or 2x16 characters, black and white only ) that my MPC8260 could use . Could someone here recommend me a good one ? Is there some support for them in the linux kernel (I use linux 2.4.4 from Denx) ? Greetings, Julien . -- Julien Eyries R&D

initrd, ramdisk problems

I managed to get this working -- what I did differently was: * changed kernel version from 2.4.18 to 2.4.4 (from the ELDK cvs repository) And that was it. It now works. The ramdisk decompresses without errors and the systems boots fine. Happy day. I noticed that the directory layout for