Unable to open an initial console

Addison Baldwin wrote: > I was sucessful to port U-Boot to our 8272 board. Now I'm experiencing > a problem: > > Our Kernel hangs with the message that says it was trasnferring > control to linux. A post morten analyzes indicated that it stopped at > "Unable to open an initial console" in the memo

Unable to open an initial console

I was sucessful to port U-Boot to our 8272 board. Now I'm experiencing a problem: Our Kernel hangs with the message that says it was trasnferring control to linux. A post morten analyzes indicated that it stopped at "Unable to open an initial console" in the memory sapce where console output shoul

MPC5200 ppc_md.set_rtc_time

bennett78 wrote: > bennett78 wrote: > >> Andrey Volkov wrote: >> >>>Hello Frank, >>> >>>bennett78 wrote: >>> >>> Hi: How / when does "ppc_md.set_rtc_time" get filled in for Lite5200? Config for support /dev/rtc enables CONFIG_PPC_RTC which enable driver/char/rtc.c whi

SMP on MV64460

scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/ff0aab77/attachment.htm

kernel 2.6.15-rc5-latest doesn't work anymore on mpc8540ads

Hello, I am just about to update my kernel from 2.6.13-rc7 which is working fine to linus' 2.6.15-rc5-latest git on my mpc8540ads flavored board. However, the kernel hangs pretty early after openpic: exit any ideas or a hint what's wrong there... before I start to debug deeper into the code? Th

[U-Boot-Users] Help required to bring up kernel from U-Boot

An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/10775add/attachment.htm

Required functions for relocating not part of relocate section

On Fri, Nov 04, 2005 at 04:06:05PM -0200, Marcelo Tosatti wrote: > Hi Paul, > > Recent 2.6-git (from Wednesday) tree fails to boot on 8xx due to: > > > BD

SMP on MV64460

Hi Lance, On Fri, Dec 16, 2005 at 05:03:14PM -0500, Lance Ware wrote: > > Hello group, > > I am currently working on a board which has MV64460 linked between > two 7447a processors. I wanted to know if someone has been able to get > the Linux 2.6 kernel working with any MV64xxx bridge. I think

POSIX High Resolution Timers in LinuxPPC 2.4

chment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/c05d41f8/attachment.htm

MPC5200 ppc_md.set_rtc_time

Hello Frank, bennett78 wrote: > Hi: >How / when does "ppc_md.set_rtc_time" get filled > in for Lite5200? > > Config for support /dev/rtc enables CONFIG_PPC_RTC > which enable driver/char/rtc.c which mentions CMOS_WRITE > panics the kernel! > > I trying to use driver/char/genrtc.c. I can se

MPC5200 TXRTS feature

Desc: Dies ist ein digital signierter Nachrichtenteil Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/37d2ae81/attachment.pgp

[PATCH] MPC85xx: CPM2 interrupt handler failure after 100, 000 interrupts

Hi Kumar, Please apply. From: Edson Seabra <[EMAIL PROTECTED]> The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. [root at KVM ~]# create_cf --doformat --factory_default ... Copying Linux kernel to /dev/hda1

[U-Boot-Users] Help required to bring up kernel from U-Boot

In message you wrote: > > I copied uImage to location 0x0400 and the Load Address=0x > and Entry point=0x. The bootm 0x0400 gives the o/p > "Transferring Control to Linux" and then nothing comes. Where is the > wrong? This is a FAQ. Please see http://www.denx.de/wiki/

Help required to bring up kernel from U-Boot

munication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you -- next part -- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/3e88c97f/attachment.htm

help reqd for mpc8260 linux

chments. Thank you -- next part -- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/035a0ac5/attachment.htm

[PATCH] powerpc: CPM2 interrupt handler failure after 100,000 interrupts

The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: Edson Seabra Signed-off-by: Marcelo Tosatti Signed-off-by: Kumar Gala --- Paul: We should put this in the merge tree for linus to pick up for

MPC5200 ppc_md.set_rtc_time

gt;___ >>Linuxppc-embedded mailing list >>Linuxppc-embedded at ozlabs.org >>https://ozlabs.org/mailman/listinfo/linuxppc-embedded >> >> >> > > > > >___ >Linuxppc-embedded mailing list >Linuxppc-embedded at ozlabs.org >https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -- next part -- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051216/f4c3a839/attachment.htm

MPC5200 ppc_md.set_rtc_time

gt; Andrey: Thanks, sorry I forgot to mention I'm on DENX linuxppc_2_4_devel. Where is the linuxppc 2.6.x distribution? Is anyone maintaining a checklist of working features for imbedded 2.6? Is this mail list searchable? (other than a month at a time?) Merry Christmas Frank Bennett >-- >Regards >Andrey Volkov >

Crash after successfully mounting root filesystem over NFS

Hi All, I dumped part of the output, kept in the log_buf. Please note the MPC866 receives an exception during access to the dual port ram... This, of course leads to another exception, and so on. The exception is during early stages of running busybox. If I run a while ( 1 ) schedule(); instead o