It happens only the first time the ioctl is issued and then not anymore.
___
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Hi all,
I'm using DENX linux-2.6.19.2, trying to send a SIOCGMIIREG to a socket
causes the following message:
Badness in local_bh_enable at kernel/softirq.c:137
The call trace shows the phy_read function that has the following body:
int phy_read(struct phy_device *phydev, u16 regnum)
{
Dan,
Shall this driver be removed?
On Sun, Mar 25, 2007 at 04:58:38PM +0200, Adrian Bunk wrote:
> Recently, someone fixed a syntax error in the HTDMSOUND driver
> introduced 4 years ago.
>
> Unfortunately not by trying to compile this driver for his hardware but
> by code inspection - which se
I saw that both in phy,c and mii.c (linux 2.6.19) there is support to handle
ioctls to read PHY registers. Why? And what should be used from a user
application? I have both CONFIG_MII and CONFIG_PHYLIB set to y.
Bye,
Antonio.
___
Linuxppc-embedded mai
> I'm using the MVME6100 board with the Motorola driver for linux v3.5
(kernel 2.6.15).
I'm not sure what a "Linux v3.5" is - Montavista? There are patches
available from Motorola to the vanila kernel if you're interested in
using something newer than 2.6.15.
> I try to access the CSR registers
On 3/15/07, Domen Puncer <[EMAIL PROTECTED]> wrote:
> U-Boot part of Lite5200b low power mode support.
> Puts SDRAM out of self-refresh and transfers control to
> address saved at physical 0x0.
This looks pretty straight forward.
My only comment is that psc2_4 is probably used as GPIO instead of
On 3/26/07, Domen Puncer <[EMAIL PROTECTED]> wrote:
> On 22/03/07 08:41 +0100, Domen Puncer wrote:
> > On 15/03/07 17:36 +0100, Domen Puncer wrote:
> > > Well... the code is only applicable for Lite5200b/mpc5200
> > > and numbers are from specs.
> > > And it's shorter than mpc52xx_find_and_map() li
Hi list,
I'm using the MVME6100 board with the Motorola driver for linux v3.5 (kernel
2.6.15). I try to access the CSR registers of an ADC board, in order to
configure it as to be able to access its memory, on the VME bus using one of
the outbound windows defined by the driver. As I am new to the
On Monday 05 March 2007 17:12, Jan-Hinnerk Dumjahn wrote:
> On Thursday 01 March 2007 19:57, Wolfgang Denk wrote:
> > In message <[EMAIL PROTECTED]> you wrote:
[...]
> > > Can anybody explain what the driver should to? Or even better has some
> > > patch to make it work?
> >
> > The driver should
On 22/03/07 08:41 +0100, Domen Puncer wrote:
> On 15/03/07 17:36 +0100, Domen Puncer wrote:
> > On 15/03/07 08:09 -0600, Grant Likely wrote:
> > > On 3/15/07, Domen Puncer <[EMAIL PROTECTED]> wrote:
> > ...
> > > >+ /* map registers */
> > > >+ mbar = ioremap_nocache(0xf000, 0x8000)
top boot Flash memory devices"
Thank you!
Michael
Bye,
Melinda.
-
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.
--0-944088738-1177796764=:5915
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
I'm using an MPC885 with the linux kernel rt
12 matches
Mail list logo