I'm having a similar problem to a question posted earlier with
initramfs.
I'm using the 2.6.20 kernel, on a Xilinx Virtex 4, ppc405, no boot
loader. I use a BDI2000 to load the kernel image directly into RAM
(32MB).
When I use a larger (4mb compressed, 13mb uncompressed) cpio archive f
Signed-off-by: Li Yang <[EMAIL PROTECTED]>
---
MAINTAINERS |7 +++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4c3277c..3faed72 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1463,6 +1463,13 @@ L: [EMAIL PROTECTED]
L: linuxppc-e
David H. Lynch Jr. wrote:
> Wolfgang Reissnegger wrote:
>> Hi Andrei, David,
>>
>> It's great to hear that Andrei's git tree is active again.
>>
>> As you might have heard, Xilinx is in the process of setting up a git
>> tree as well. Right now we are waiting for the new hosting machines to
>> be i
Hi,
The Gianfar driver is hanging during boot-up after a soft reboot. It
works fine when the board is power cycled.
Any hints on where to look further on this issue?
Here are the details (cut and pasted from my colleague's email):
1. Load the kernel from the Flash and the rootfs from a NFS se
Wolfgang Reissnegger wrote:
> Hi Andrei, David,
>
> It's great to hear that Andrei's git tree is active again.
>
> As you might have heard, Xilinx is in the process of setting up a git
> tree as well. Right now we are waiting for the new hosting machines to
> be installed. We should get those machi
Andrei Konovalov wrote:
> Hi David,
>
> David H. Lynch Jr. wrote:
>>>
>> I have an almost working FIFO TEMAC driver. It is similarly based.
>> it started out based on the Trek webserver sample
>
> Is this a reference design by Xilinx? Linux based or standalone?
I did a Local Link hard TEMAC
Hi!
We are using a RHEL/386 machine to cross-compile for Debian/PowerPC (8260)
target, a few year old embedded system that we inherited. The kernel is
2.4.9. Using crosstools, and following Dan Kegel's notes, the combo we have
is gcc-2.95-3/glibc-2.2.5.
Does anybody have any working version usi
'ifconfig eth0' command for mpc5200B-based cards shows error for RX.
However none of RX MIB counters is set to value greater than zero.
Number of errors is equal to number of multicast packet. In linux 2.4
calculation of RX errors is slightly different and takes into account
number of multicast pac
Hi Andrei, David,
It's great to hear that Andrei's git tree is active again.
As you might have heard, Xilinx is in the process of setting up a git
tree as well. Right now we are waiting for the new hosting machines to
be installed. We should get those machines up and running shortly
(within a cou
Hi David,
David H. Lynch Jr. wrote:
> Andrei Konovalov wrote:
>> Hello,
>>
>> My Xilinx Virtex Development tree is now alive again.
>>
>> Please use the dev branch (master is just the ko copy):
>> http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=shortlog;h=dev
>> Currently it has a
Andrei Konovalov wrote:
> Hello,
>
> My Xilinx Virtex Development tree is now alive again.
>
> Please use the dev branch (master is just the ko copy):
> http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=shortlog;h=dev
> Currently it has a patch to enable the framebuffer
> on ML403 and
Hello,
My Xilinx Virtex Development tree is now alive again.
Please use the dev branch (master is just the ko copy):
http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=shortlog;h=dev
Currently it has a patch to enable the framebuffer
on ML403 and ML300 plus TEMAC driver that uses
the
12 matches
Mail list logo