Add flash definition for to lite5200b dts, and while at it
fix ranges for soc node.
Signed-off-by: Domen Puncer [EMAIL PROTECTED]
---
Hi!
Sylvain, it would be nice to have this merged.
# cat /proc/mtd
dev:size erasesize name
mtd0: 0100 0002 data0
mtd1: 00f0 0002 data1
Stephen Rothwell wrote:
On Wed, 01 Aug 2007 05:16:27 +0200 Gabriel C [EMAIL PROTECTED] wrote:
arch/powerpc/platforms/iseries/it_lp_naca.h | 87
+++--
NAK this part as it just makes a lot of the lines more than 80 characters
for no real gain on a platform that is
This patch fixes some interrrupt - interrupt typos
Signed-off-by: Gabriel Craciunescu [EMAIL PROTECTED]
---
arch/powerpc/platforms/embedded6xx/holly.c|2 +-
arch/powerpc/platforms/embedded6xx/linkstation.c |2 +-
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c |2 +-
khollan schrieb:
Hey
Im looking for a basic ftp server to run on my ML410 Xilinx board, I was
looking on the net and couldn't find anything that stands out. Does anyone
have suggestions, or know of something that works well.
Thanks
kholland
netkit-ftp seems to be standard.
I am using
I want to receive interrupt from 1 GPIO port (for example 14)
I changed the GPIMR to 0x (so I need to get interrupts from all GPIO
ports)
And then request the irq by :
irq_create_mapping(NULL,74);
request_irq(74,handler,IRQF_DISABLED,GPIO,NULL);
the return value is 0 (OK)
but I
On 8/1/07, Domen Puncer [EMAIL PROTECTED] wrote:
Add flash definition for to lite5200b dts, and while at it
fix ranges for soc node.
Signed-off-by: Domen Puncer [EMAIL PROTECTED]
---
Hi!
Sylvain, it would be nice to have this merged.
# cat /proc/mtd
dev:size erasesize name
On Jul 31, 2007, at 7:36 PM, Joe Hamman wrote:
Add support for Wind River's SBC8641D reference board.
Is this a single core or dual core chip?
Signed-off by: Joe Hamman [EMAIL PROTECTED]
diff -purN -X dontdiff linux-2.6/arch/powerpc/boot/dts/sbc8641d.dts
Sorry, I replied to only the first question.
-Original Message-
From: Kumar Gala [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 01, 2007 9:18 AM
To: [EMAIL PROTECTED]
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: [PATCH] Add support for Wind River SBC8641D board
On Jul 31,
The board supports both single and dual core parts. The board I have is
single core.
-Original Message-
From: Kumar Gala [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 01, 2007 9:18 AM
To: [EMAIL PROTECTED]
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: [PATCH] Add support for
how do you know execution stop at rfi instruction.i think it seems it stop at
rfi instruction when debugging through debugger, but it does n't . you check
it by putting break point in the later functions e.g start_here, machine_init
etc.
-
5, 50, 500,
Is the interrupt configured properly for whatever it is you connect to it?
(level vs edge triggered, rising vs falling)
Best regards,
Florian
On Wed, 1 Aug 2007 14:45:05 +0300
Yoni Levin [EMAIL PROTECTED] wrote:
I want to receive interrupt from 1 GPIO port (for example 14)
I changed
On Aug 1, 2007, at 9:53 AM, Joe Hamman wrote:
Sorry, I replied to only the first question.
-Original Message-
From: Kumar Gala [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 01, 2007 9:18 AM
To: [EMAIL PROTECTED]
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: [PATCH] Add
On Wed, Aug 01, 2007 at 02:45:05PM +0300, Yoni Levin wrote:
request_irq(74,handler,IRQF_DISABLED,GPIO,NULL);
^
Did you try removing that flag (or calling enable_irq())?
-Scott
___
Linuxppc-embedded mailing list
On 01/08/07 06:41 -0600, Grant Likely wrote:
On 8/1/07, Domen Puncer [EMAIL PROTECTED] wrote:
Add flash definition for to lite5200b dts, and while at it
fix ranges for soc node.
...
+++ work-powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
@@ -52,7 +52,8 @@
revision = ;
14 matches
Mail list logo