> "aaronsells" == aaronsells <[EMAIL PROTECTED]> writes:
Hi,
aaronsells> I've tried this on my ML403 board with no success. My
aaronsells> Xilinx git tree is current. I'm using Peter's most
aaronsells> recent patches from
aaronsells> http://peter.korsgaard.com/patches/linux/. I'm using
Hi all,
I'm working on an AMCC PPC440EPx-based platform that's similar to the
Sequoia. The board runs pretty well, but occasionally takes exceptions
both in U-Boot and while running Linux. The exceptions vary from
Illegal Instructions to FP Unavailable to FP Unimplemented to ITLB and
DTLB Errors
Hi,
I am writing the Non-Xilinx XPS_LL_TEMAC driver.
Checksum offloading is incomplete although NAPI and KGDBOE are supported.
Basic operation is working on EDK9.2 and EDK10.1.
Furthermore, although the simple Non-Interrupt version for u-boot is
also written, it is not known where I should post.
I have the start of a lltemac based on the new XPS_LL_TEMAC from EDK
9.2. I'm currently in the process of upgrading my design to 9.2. So I
will be very much interested in the driver working ;).
I'll see what I can get cleaned up and posted somewhere, if you'd like
to take a look at it.
-- Mike
(
Grant Likely wrote:
1. Post your boot log
Linux/PPC load: console=ttyUL0,9600 root=/dev/nfs rw
nfsroot=172.16.100.6:/opt/oe/console ip=dhcp
Uncompressing Linux...done.
Now booting the kernel
[0.00] Linux version 2.6.24-rc8-xlnx-dirty
([EMAIL PROTECTED]) (gcc version 4.2.2) #2 Tue Apr
On Tue, Apr 22, 2008 at 2:46 PM, Aaron Sells <[EMAIL PROTECTED]> wrote:
> Grant Likely wrote:
>
> > 2. Make sure a platform device for the usb controller is getting
> > registered with the kernel.
> >
>
> Correct me if I'm wrong, but it does not look like my Cypress CY7C6300 USB
> host controller
On Tue, Apr 22, 2008 at 1:23 PM, aaronsells <[EMAIL PROTECTED]> wrote:
>
>
> Grant Likely-2 wrote:
> >
> > Your best bet is to use
> > Xilinx's git tree and manually patch in the c67x00 driver from Peter
> > Korsgaard's driver.
> >
> > http://www.mail-archive.com/[EMAIL PROTECTED]/msg01907.h
Grant Likely-2 wrote:
>
> Your best bet is to use
> Xilinx's git tree and manually patch in the c67x00 driver from Peter
> Korsgaard's driver.
>
> http://www.mail-archive.com/[EMAIL PROTECTED]/msg01907.html
> http://www.mail-archive.com/[EMAIL PROTECTED]/msg01908.html
> http://www.mail-archive.
On Tue, Apr 22, 2008 at 01:10:54PM +0800, 张世乐 wrote:
> Thank you, Doctor Scott. I'm very grateful to you for you kindly help.
>
> I'll try the way you suggested soon.
>
> And, my code for light the led run as follows:
>
> void set_led_a_red(void)
> {
> /*PDIRC: 0xfc010d40*/
> /*PPARC
___
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
10 matches
Mail list logo
