Hi Koen,
Well spotted! Unfortunately this is not the problem. I got the base
address and mask the wrong way round in my email but they are the right
way round in my code. Oops.
I tried your OR8 settings but they didn't work either. I think there
may be a problem with the addressing on the CR8
Hi Alex,
I have got the Microsys board but I believe
you sort of mixed up the 2 registers :
try :
memctl->memc_br8 = 0xe0400821; // base 0xe040; default timings;
// bank valid; 8bit port; GPCM local;
memctl->memc_or8 = 0x8820; // min banksize;
